On 03/08, Hans Petter Selasky wrote: >On 03/08/18 17:16, Bernd Walter wrote: >>Hardware is a Raspberry Pi3 with current r330034. >>I'm trying to run a USB touchscreen. >>Tested wmt and uep, but neither wants to attach, although the Waveshare >>display I'm using is likely running an egalaxy firmware. >>However webcamd accepts the device and creates a /dev/input/event0. >>But I can't get X to use it. >>xf86-input-evdev-2.10.5 is installed and it created an X config file >>under /usr/local/share/X11/xorg.conf.d/10-evdev.conf. >>I also tried some google results in /etc/X11/xorg.conf, but X never >>touches the device: > >See here: > >https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=196678 Or here: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=222609 But that's all about hotplug. It is definitely possible to manually configure the device on the stock xorg-server package. I can't say if the "google results" are correct without actually seeing them, but it should explicitly specify the /dev/input/event0 path.Received on Thu Mar 08 2018 - 15:37:14 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:15 UTC