FYI - newly installed: ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1 ugen0.2: <vendor 0x8087 product 0x8008> at usbus0 uhub3 on uhub1 uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus0 uhub2: 8 ports with 8 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen1.3: <CHESEN PS2 to USB Converter> at usbus1 ukbd0 on uhub2 ukbd0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 3> on usbus1 kbd2 at ukbd0 ugen1.4: <JMicron USB to ATA/ATAPI Bridge> at usbus1 umass0 on uhub2 umass0: <MSC Bulk-Only Transport> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4100 umass0:4:0: Attached to scbus4 ugen1.5: <Kingston DataTraveler 3.0> at usbus1 umass1 on uhub2 umass1: <Kingston DataTraveler 3.0, class 0/0, rev 2.10/0.01, addr 5> on usbus1 umass1: SCSI over Bulk-Only; quirks = 0x8100 umass1:5:1: Attached to scbus5 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error da1 at umass-sim1 bus 1 scbus5 target 0 lun 0 da1: <Kingston DataTraveler 3.0 1.00> Removable Direct Access SPC-4 SCSI device da1: Serial Number 60A44C3FACC9FE118997019C da1: 40.000MB/s transfers da1: 29510MB (60437492 512 byte sectors) da1: quirks=0x2<NO_6_BYTE> Trying to mount root from ufs:/dev/da0p2 []... WARNING: WITNESS option enabled, expect reduced performance. da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: <JMB352 RAID-1 0X01> Fixed Direct Access SPC-4 SCSI device da0: Serial Number 000000000000 da0: 40.000MB/s transfers da0: 5723166MB (11721043968 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> lock order reversal: 1st 0xfffff80004f77608 ufs (ufs) _at_ /usr/src/sys/kern/vfs_lookup.c:713 2nd 0xfffffe000080edc0 bufwait (bufwait) _at_ /usr/src/sys/ufs/ffs/ffs_vnops.c:283 3rd 0xfffff80006aff248 ufs (ufs) _at_ /usr/src/sys/kern/vfs_subr.c:2598 stack backtrace: #0 0xffffffff80c48773 at witness_debugger+0x73 #1 0xffffffff80c484bd at witness_checkorder+0xa7d #2 0xffffffff80bb45dd at lockmgr_xlock_hard+0x6d #3 0xffffffff80bb505e at __lockmgr_args+0x5fe #4 0xffffffff80ef4365 at ffs_lock+0xa5 #5 0xffffffff81236d93 at VOP_LOCK1_APV+0x63 #6 0xffffffff80cc3715 at _vn_lock+0x65 #7 0xffffffff80cb1ee6 at vget+0x66 #8 0xffffffff80ca3fcc at vfs_hash_get+0xcc #9 0xffffffff80eefc4f at ffs_vgetf+0x3f #10 0xffffffff80ee5a32 at softdep_sync_buf+0xb62 #11 0xffffffff80ef5124 at ffs_syncvnode+0x234 #12 0xffffffff80ecad66 at ffs_truncate+0x716 #13 0xffffffff80efc909 at ufs_direnter+0x609 #14 0xffffffff80f055dd at ufs_makeinode+0x5fd #15 0xffffffff80f01544 at ufs_create+0x34 #16 0xffffffff81234b30 at VOP_CREATE_APV+0x60 #17 0xffffffff80cc301f at vn_open_cred+0x2cf random: unblocking device. lo0: link state changed to UP em0: link state changed to UP ums0 on uhub2 ums0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 3> on usbus1 ums0: 5 buttons and [XYZ] coordinates ID=1 Security policy loaded: MAC/ntpd (mac_ntpd) root_at_colossus:~ # uname -a FreeBSD colossus.isux.com 13.0-CURRENT FreeBSD 13.0-CURRENT r346979 GENERIC amd64 root_at_colossus:~ # -- Michelle Sullivan http://www.mhix.org/Received on Wed May 01 2019 - 07:57:14 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:20 UTC