Hi! > > We have a system with 10 SATA disks. 2 disks are for the system, > > 8 disks drive a data pool 'bck', configured as raidz2, for backup purposes: > > > > bck 72.8T 38.7T 34.1T - - 1% 53% 1.00x ONLINE - > > The problem is that if all 10 disks are connected, the system > > looses track from where it should boot and fails to boot (serial boot log): > Why this order does change? One would expect disks 0 and 1 to be OS disks and the rest for data??? 0+1 are 2.5", and the initial setup was: - we installed system disks as zroot - shipped the box to the housing facility - booted and added the drives At that time we did not do additional tests about the disk/boot sequence etc. > Also the question is, what you mean with ???system looses track???? I interpret the hang during boot as 'it looses track'. So I guess it tries to read the kernel from the wrong drives. > disk4 becomes adaX? why it matters, are you using ufs on boot disks? No, zpool only. I've made a few more details available here: https://people.freebsd.org/~pi/host/dmesg.txt https://people.freebsd.org/~pi/host/devlist.txt https://people.freebsd.org/~pi/host/gpart.txt https://people.freebsd.org/~pi/host/pciconf.txt https://people.freebsd.org/~pi/host/zpool.txt -- pi_at_opsec.eu +49 171 3101372 One year to go !Received on Thu Sep 19 2019 - 13:57:18 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:21 UTC