In message <036a5750-1af7-b83d-e141-f43585a1b8d2_at_selasky.org>, Hans Petter Sela sky writes: > On 2020-01-24 08:01, Cy Schubert wrote: > > Let's try this again, this time with a subject line. It's late, almost bed > > time and I'm forgetting subject lines. <sigh> > > > > Hi, > > > > Has anyone seen this before? It started happening on two of my machines > > this evening. Both machines are AMD (not intel). In both cases powerd was > > caught with its hand in the cookie jar. > > > > Fatal trap 12: page fault while in kernel mode^M > > cpuid = 3; apic id = 03^M > > fault virtual address = 0x90^M > > fault code = supervisor read data, page not present^M > > instruction pointer = 0x20:0xffffffff8068b018^M > > stack pointer = 0x28:0xfffffe0066ff99e0^M > > frame pointer = 0x28:0xfffffe0066ff99e0^M > > code segment = base 0x0, limit 0xfffff, type 0x1b^M > > = DPL 0, pres 1, long 1, def32 0, gran 1^M > > processor eflags = interrupt enabled, resume, IOPL = 0^M > > current process = 2781 (powerd)^M > > trap number = 12^M > > panic: page fault^M > > cpuid = 3^M > > time = 1579843504^M > > KDB: stack backtrace:^M > > db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame > > 0xfffffe0066ff9650^M > > vpanic() at vpanic+0x185/frame 0xfffffe0066ff96b0^M > > panic() at panic+0x43/frame 0xfffffe0066ff9710^M > > trap_fatal() at trap_fatal+0x386/frame 0xfffffe0066ff9770^M > > trap_pfault() at trap_pfault+0x4f/frame 0xfffffe0066ff97e0^M > > trap() at trap+0x288/frame 0xfffffe0066ff9910^M > > calltrap() at calltrap+0x8/frame 0xfffffe0066ff9910^M > > --- trap 0xc, rip = 0xffffffff8068b018, rsp = 0xfffffe0066ff99e0, rbp = > > 0xfffffe > > 0066ff99e0 ---^M > > _rm_rlock() at _rm_rlock+0x58/frame 0xfffffe0066ff99e0^M > > sysctl_root_handler_locked() at sysctl_root_handler_locked+0xde/frame > > 0xfffffe00 > > 66ff9a20^M > > sysctl_root() at sysctl_root+0x249/frame 0xfffffe0066ff9aa0^M > > userland_sysctl() at userland_sysctl+0x178/frame 0xfffffe0066ff9b50^M > > sys___sysctl() at sys___sysctl+0x5f/frame 0xfffffe0066ff9c00^M > > amd64_syscall() at amd64_syscall+0x3a3/frame 0xfffffe0066ff9d30^M > > fast_syscall_common() at fast_syscall_common+0x101/frame > > 0xfffffe0066ff9d30^M > > --- syscall (202, FreeBSD ELF64, sys___sysctl), rip = 0x2c034f9a, rsp = > > 0x7fffff > > ffeb38, rbp = 0x7fffffffeb70 ---^M > > Uptime: 2h12m24s^M > > Dumping 2496 out of 8167 MB: (CTRL-C to abort) ..1%..11%..21%..31%..41%..51 > % > > ..61 > > %..71%..81%..91%^M > > Dump complete^M > > > > > > > > Fatal trap 12: page fault while in kernel mode^M > > cpuid = 3; apic id = 03^M > > fault virtual address = 0x90^M > > fault code = supervisor read data, page not present^M > > instruction pointer = 0x20:0xffffffff8068b018^M > > stack pointer = 0x28:0xfffffe004d2a79e0^M > > frame pointer = 0x28:0xfffffe004d2a79e0^M > > code segment = base 0x0, limit 0xfffff, type 0x1b^M > > = DPL 0, pres 1, long 1, def32 0, gran 1^M > > processor eflags = interrupt enabled, resume, IOPL = 0^M > > current process = 2849 (powerd)^M > > trap number = 12^M > > panic: page fault^M > > cpuid = 3^M > > time = 1579847814^M > > KDB: stack backtrace:^M > > db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame > > 0xfffffe004d2a7650^M > > vpanic() at vpanic+0x185/frame 0xfffffe004d2a76b0^M > > panic() at panic+0x43/frame 0xfffffe004d2a7710^M > > trap_fatal() at trap_fatal+0x386/frame 0xfffffe004d2a7770^M > > trap_pfault() at trap_pfault+0x4f/frame 0xfffffe004d2a77e0^M > > trap() at trap+0x288/frame 0xfffffe004d2a7910^M > > calltrap() at calltrap+0x8/frame 0xfffffe004d2a7910^M > > --- trap 0xc, rip = 0xffffffff8068b018, rsp = 0xfffffe004d2a79e0, rbp = > > 0xfffffe > > 004d2a79e0 ---^M > > _rm_rlock() at _rm_rlock+0x58/frame 0xfffffe004d2a79e0^M > > sysctl_root_handler_locked() at sysctl_root_handler_locked+0xde/frame > > 0xfffffe00 > > 4d2a7a20^M > > sysctl_root() at sysctl_root+0x249/frame 0xfffffe004d2a7aa0^M > > userland_sysctl() at userland_sysctl+0x178/frame 0xfffffe004d2a7b50^M > > sys___sysctl() at sys___sysctl+0x5f/frame 0xfffffe004d2a7c00^M > > amd64_syscall() at amd64_syscall+0x3a3/frame 0xfffffe004d2a7d30^M > > fast_syscall_common() at fast_syscall_common+0x101/frame > > 0xfffffe004d2a7d30^M > > --- syscall (202, FreeBSD ELF64, sys___sysctl), rip = 0x800434f9a, rsp = > > 0x7ffff > > fffeb38, rbp = 0x7fffffffeb70 ---^M > > Uptime: 2h57m35s^M > > Dumping 1823 out of 5095 MB: (CTRL-C to abort) ..1%..11%..21%..31%..41%..51 > % > > ..61 > > %..71%..81%..91%^M > > Dump complete^M > > > > Can you show regular dmesg. Maybe some driver failed loading, and some > sysctls were leftover! I don't see anything out of the ordinary here. Instead of dmesg, the console log from the serial console. It's early (been up for 10 minutes) and nothing jumps out at me. Disabling powerd has provided some stability. My firewall also uses the same configuration, with powerd, but it's not under nearly the same load either. It's interesting to note the two machines that did panic did so within 90 minutes of each other and both at the time their builds had completed (I presume, as I was either in transit or consuming a meal or something at the time). 1 FreeBSD 2 FreeBSD 3 FreeBSD 5 Drive 1 F6 PXE Boot: 1 /boot/config: -Dh /-\|/Consoles: internal video/keyboard serial port BIOS drive A: is fd0 BIOS drive C: is disk0 BIOS drive D: is disk1 BIOS drive E: is disk2 BIOS drive F: is disk3 BIOS drive G: is disk4 |BIOS 636kB/3143552kB available memory FreeBSD/x86 bootstrap loader, Revision 1.1 (Fri Aug 2 19:46:46 PDT 2019 root_at_cwsys) /-\|/Loading /boot/defaults/loader.conf Loading /boot/device.hints -\Loading /boot/loader.conf Loading /boot/loader.conf.local |Loading kernel... /-\|/-/boot/kernel/kernel text=0x994a20 \|data=0xe0 data=0x12be98+0x2d3168 /-\|/-syms=[0x8+0xee3e0\|/-+0x8+0x10e87d\|/-] Loading configured modules... \|/-/boot/kernel/filemon.ko \size 0x6ed8 at 0x11fd000 |/boot/kernel/kbdmux.ko /size 0xaad0 at 0x1204000 -\|/-/boot/kernel/dtraceall.ko size 0x3a58 at 0x120f000 loading required module 'profile' \|//boot/kernel/profile.ko -size 0x4cf8 at 0x1213000 loading required module 'opensolaris' \/boot/kernel/opensolaris.ko size 0xb858 at 0x1218000 loading required module 'dtrace' |/-/boot/kernel/dtrace.ko \|/-size 0x61250 at 0x1224000 loading required module 'systrace_freebsd32' \/boot/kernel/systrace_freebsd32.ko |size 0x183a0 at 0x1286000 loading required module 'systrace' /-\/boot/kernel/systrace.ko |/size 0x18580 at 0x129f000 loading required module 'sdt' -\|/boot/kernel/sdt.ko size 0x4598 at 0x12b8000 loading required module 'fasttrap' /-\|//boot/kernel/fasttrap.ko -\|/-size 0x61518 at 0x12bd000 loading required module 'fbt' \|//boot/kernel/fbt.ko size 0x68c0 at 0x131f000 loading required module 'dtnfscl' -\|/boot/kernel/dtnfscl.ko size 0x6b38 at 0x1326000 loading required module 'dtmalloc' /-\/boot/kernel/dtmalloc.ko |size 0x3e10 at 0x132d000 /-\|//boot/kernel/amdtemp.ko size 0x4e70 at 0x1331000 loading required module 'amdsmn' -\|/boot/kernel/amdsmn.ko size 0x3e30 at 0x1336000 /-\/boot/kernel/cpufreq.ko |size 0x148c8 at 0x133a000 /-\/boot/kernel/geom_mirror.ko |size 0x221e8 at 0x134f000 /-\/boot/kernel/zfs.ko |size 0x3a6198 at 0x1372000 /-\|/-/boot/entropy \size=0x1000 can't find 'random' /boot/kernel/sem.ko /size 0x8a88 at 0x171a000 boot/kernel/if_nfe.ko /size 0x11ec0 at 0x1723000 boot/kernel/if_sk.ko \size 0x102a0 at 0x1735000 Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel] in 8 seconds... Booting [/boot/kernel/kernel] in 7 seconds... Booting [/boot/kernel/kernel] in 6 seconds... Booting [/boot/kernel/kernel] in 5 seconds... Booting [/boot/kernel/kernel] in 4 seconds... Booting [/boot/kernel/kernel] in 3 seconds... Booting [/boot/kernel/kernel] in 2 seconds... Booting [/boot/kernel/kernel] in 1 second... Booting [/boot/kernel/kernel]... |/GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb ---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT #745 r357066M: Thu Jan 23 18:25:43 PST 2020 root_at_cwsys:/export/obj/opt/src/svn-current/amd64.amd64/sys/BREAK amd64 FreeBSD clang version 9.0.1 (git_at_github.com:llvm/llvm-project.git c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1) VT(vga): text 80x25 CPU: AMD Phenom(tm) II X4 945 Processor (3013.95-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x100f43 Family=0x10 Model=0x4 Stepping=3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M CA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3D Now!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW, IBS,SKINIT,WDT> SVM: NP,NRIP,NAsids=64 TSC: P-state invariant real memory = 8589934592 (8192 MB) avail memory = 8268652544 (7885 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <Nvidia ASUSACPI> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20200110/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20200110/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20200110/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20200110/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20200110/tbfadt-748) Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20200110/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20200110/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20200110/tbfadt-850) ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 Launching APs: 1 3 2 Timecounter "TSC-low" frequency 1506974596 Hz quality 800 random: entropy device external interface WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. kbd1 at kbdmux0 nexus0 vtvga0: <VT VGA driver> cryptosoft0: <software crypto> acpi0: <Nvidia ASUSACPI> ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.CPU0 (20200110/dspkginit-605) acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff irq 0,8 on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 950 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <nVidia nForce MCP55 USB Controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0 usbus0 on ohci0 usbus0: 12Mbps Full Speed USB v1.0 ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 4.0 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf700-0xf70f mem 0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0 ata2: <ATA channel> at channel 0 on atapci1 ata3: <ATA channel> at channel 1 on atapci1 atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf200-0xf20f mem 0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0 ata4: <ATA channel> at channel 0 on atapci2 ata5: <ATA channel> at channel 1 on atapci2 atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xf100-0xf107,0xf000-0xf003,0xef00-0xef07,0xee00-0xee03,0xed00-0xed0f mem 0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0 ata6: <ATA channel> at channel 0 on atapci3 ata7: <ATA channel> at channel 1 on atapci3 pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci1: <ACPI PCI bus> on pcib1 skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xdc00-0xdcff mem 0xfdefc000-0xfdefffff irq 16 at device 6.0 on pci1 skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x1) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:13:46:8f:ca:75 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc1: <D-Link DGE-530T Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfdef8000-0xfdefbfff irq 17 at device 7.0 on pci1 skc1: DGE-530T Gigabit Ethernet Adapter rev. (0x1) sk1: <Marvell Semiconductor, Inc. Yukon> on skc1 sk1: Ethernet address: 00:11:95:e3:94:04 miibus1: <MII bus> on sk1 e1000phy1: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc2: <D-Link DGE-530T Gigabit Ethernet> port 0xd400-0xd4ff mem 0xfdef4000-0xfdef7fff irq 18 at device 8.0 on pci1 skc2: DGE-530T Gigabit Ethernet Adapter rev. (0x9) sk2: <Marvell Semiconductor, Inc. Yukon> on skc2 sk2: Ethernet address: 00:17:9a:ba:a7:ee miibus2: <MII bus> on sk2 e1000phy2: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus2 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xec00-0xec07 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 22 at device 8.0 on pci0 miibus3: <MII bus> on nfe0 e1000phy3: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus3 e1000phy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow nfe0: Using defaults for TSO: 65518/35/2048 nfe0: Ethernet address: 00:1e:8c:64:28:4c pcib2: <ACPI PCI-PCI bridge> at device 15.0 on pci0 pci2: <ACPI PCI bus> on pcib2 vgapci0: <VGA-compatible display> port 0xcc00-0xcc7f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci2 vgapci0: Boot video device pci2: <multimedia, HDA> at device 0.1 (no driver attached) amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb3 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (9600,n,8,1) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988 ugen0.1: <nVidia OHCI root HUB> at usbus0 ugen1.1: <nVidia EHCI root HUB> at usbus1 uhub0Trying to mount root from ufs:/dev/mirror/gm0a [rw]... on usbus0 Root mount waiting for:uhub1 usbus0 on usbus1 usbus1uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 CAMuhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 10 ports with 10 removable, self powered Root mount waiting for: usbus1 CAM ada0 at ata0 bus 0 scbus0 target 1 lun 0 ada0: <Maxtor 6Y120L0 YAR41BW0> ATA-7 device ada0: Serial Number Y321KK0E ada0: 133.000MB/s transfers (UDMA6, PIO 8192bytes) ada0: 117246MB (240121728 512 byte sectors) ada1 at ata2 bus 0 scbus2 target 0 lun 0 ada1: <ST3500418AS CC38> ATA8-ACS SATA 2.x device ada1: Serial Number 6VMRPHP3 ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada1: 476940MB (976773168 512 byte sectors) ada2 at ata3 bus 0 scbus3 target 0 lun 0 ada2: <ST500DM002-1BC142 JC4B> ATA8-ACS SATA 3.x device ada2: Serial Number W2A7GHLB ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada2: 476940MB (976773168 512 byte sectors) ada2: quirks=0x1<4K> ada3 at ata4 bus 0 scbus4 target 0 lun 0 ada3: <WDC WD3200AAKS-00B3A0 01.03A01> ATA8-ACS SATA 2.x device ada3: Serial Number WD-WMAT10341892 ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada3: 305245MB (625142448 512 byte sectors) ada4 at ata5 bus 0 scbus5 target 0 lun 0 ada4: <ST3320620AS 3.AAE> ATA-7 SATA 2.x device ada4: Serial Number 3QF0Y905 ada4: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada4: 305245MB (625142448 512 byte sectors) cd0 at ata0 bus 0 scbus0 target 0 lun 0 cd0: <SONY DVD RW DRU-820A 1.0b> Removable CD-ROM SCSI device cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present GEOM_MIRROR: Device mirror/gm0 launched (3/3). GEOM_MIRROR: Device mirror/gm1 launched (1/3). GEOM_MIRROR: Device gm1: rebuilding provider ada1s2. GEOM_MIRROR: Device gm1: rebuilding provider ada0s2. uhub1: 10 ports with 10 removable, self powered mountroot: waiting for device /dev/mirror/gm0a... WARNING: / was not properly dismounted Setting hostuuid: 600c518b-9c7a-da11-bad8-0018f3a0dca4. Setting hostid: 0x05cfd84b. Starting file system checks: ** SU+J Recovering /dev/mirror/gm0a ** Reading 16777216 byte journal from inode 4. ** Building recovery table. ** Resolving unreferenced inode list. ** Processing journal entries. ** 3 journal records in 512 bytes for 18.75% utilization ** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags. ***** FILE SYSTEM MARKED CLEAN ***** ** SU+J Recovering /dev/mirror/gm1e ** Reading 8388608 byte journal from inode 4. ** SU+J Recovering /dev/mirror/gm0f ** Reading 25165824 byte journal from inode 4. ** Building recovery table. ** Resolving unreferenced inode list. ** Processing journal entries. ** 1 journal records in 512 bytes for 6.25% utilization ** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags. ***** FILE SYSTEM MARKED CLEAN ***** ** SU+J Recovering /dev/mirror/gm1a ** Reading 16777216 byte journal from inode 4. ** Building recovery table. ** Resolving unreferenced inode list. ** Processing journal entries. ***** FILE SYSTEM MARKED CLEAN ***** ** SU+J Recovering /dev/mirror/gm0d ** Reading 16777216 byte journal from inode 4. ** Building recovery table. ** Resolving unreferenced inode list. ** Processing journal entries. ***** FILE SYSTEM MARKED CLEAN ***** ** Building recovery table. ** Resolving unreferenced inode list. ** Processing journal entries. ** 1 journal records in 512 bytes for 6.25% utilization ** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags. ***** FILE SYSTEM MARKED CLEAN ***** ** SU+J Recovering /dev/mirror/gm0e ** Reading 8388608 byte journal from inode 4. ** SU+J Recovering /dev/mirror/gm1f ** Reading 25165824 byte journal from inode 4. ** Building recovery table. ** Resolving unreferenced inode list. ** Processing journal entries. ***** FILE SYSTEM MARKED CLEAN ***** ** Building recovery table. ** Resolving unreferenced inode list. ** Processing journal entries. ***** FILE SYSTEM MARKED CLEAN ***** ** SU+J Recovering /dev/mirror/gm1d ** Reading 16777216 byte journal from inode 4. ** Building recovery table. ** Resolving unreferenced inode list. ** Processing journal entries. ***** FILE SYSTEM MARKED CLEAN ***** Mounting local filesystems:. Mounting ZFS filesystems: (94/170)(148/170)(170/170) kldload: can't load io: module already loaded or in kernel kldload: can't load nullfs: module already loaded or in kernel ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/krb5/lib /usr/local/kde4/lib /usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/dovecot /usr/local/lib/e2fsprogs /usr/local/lib/freeradius-3.0.19 /usr/local/lib/gcc10 /usr/local/lib/gcc48 /usr/local/lib/gcc5 /usr/local/lib/gcc6 /usr/local/lib/gcc8 /usr/local/lib/gcc9 /usr/local/lib/graphviz /usr/local/lib/httrack /usr/local/lib/itcl3.4 /usr/local/lib/jitsi/lib/native /usr/local/lib/mysql /usr/local/lib/mysql/plugin /usr/local/lib/nss /usr/local/lib/opencollada /usr/local/lib/perl5/5.26/mach/CORE /usr/local/lib/perl5/5.28/mach/CORE /usr/local/lib/perl5/5.30/mach/CORE /usr/local/lib/pgtcl /usr/local/lib/pidgin /usr/local/lib/pth /usr/local/lib/qt5 /usr/local/lib/samba4 /usr/local/lib/xrdp /usr/local/libexec/openldap /usr/local/llvm-devel/lib /usr/local/llvm60/lib /usr/local/llvm70/lib /usr/local/llvm80/lib /usr/local/llvm90/lib /usr/local/share/chromium 32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat Setting hostname: cwsys. Additional TCP/IP options: rfc1323 extensions=NO. Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET _TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . lo0: link state changed to UP sk0: link state changed to DOWN GEOM_MIRROR: Device gm1: rebuilding provider ada1s2 finished. sk0: link state changed to UP sk1: link state changed to DOWN sk1: link state changed to UP nfe0: link state changed to DOWN nfe0: link state changed to UP Starting Network: lo0 sk0 sk1 nfe0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=80009<RXCSUM,VLAN_MTU,LINKSTATE> ether 00:13:46:8f:ca:75 inet 10.1.1.1 netmask 0xffffff00 broadcast 10.1.1.255 inet 10.1.1.20 netmask 0xffffffff broadcast 10.1.1.20 inet6 fe80::213:46ff:fe8f:ca75%sk0 prefixlen 64 scopeid 0x1 inet6 fc00:1:1:1::1 prefixlen 64 inet6 fc00:1:1:1:213:46ff:fe8f:ca75 prefixlen 64 autoconf media: Ethernet autoselect (1000baseT <full-duplex>) status: active nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> sk1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=80009<RXCSUM,VLAN_MTU,LINKSTATE> ether 00:11:95:e3:94:04 inet 10.1.2.200 netmask 0xffffffff broadcast 10.1.2.255 inet6 fe80::211:95ff:fee3:9404%sk1 prefixlen 64 scopeid 0x2 inet6 fc00:1:1:2::64 prefixlen 64 inet6 fc00:1:1:2:211:95ff:fee3:9404 prefixlen 64 autoconf media: Ethernet autoselect (1000baseT <full-duplex>) status: active nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MA GIC,VLAN_HWTSO,LINKSTATE> ether 00:1e:8c:64:28:4c inet 10.1.2.1 netmask 0xffffff00 broadcast 10.1.2.255 inet6 fe80::21e:8cff:fe64:284c%nfe0 prefixlen 64 scopeid 0x4 inet6 fc00:1:1:2::1 prefixlen 64 inet6 fc00:1:1:2:21e:8cff:fe64:284c prefixlen 64 autoconf media: Ethernet autoselect (1000baseT <full-duplex>) status: active nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> Starting devd. sk2: link state changed to UP Starting Network: sk2. sk2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=80009<RXCSUM,VLAN_MTU,LINKSTATE> ether 00:17:9a:ba:a7:ee media: Ethernet autoselect (100baseTX <full-duplex>) status: active nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> Cannot 'start' uhidd. Set uhidd_enable to YES in /etc/rc.conf or use 'onestart' instead of 'start'. Cannot 'start' uhidd. Set uhidd_enable to YES in /etc/rc.conf or use 'onestart' instead of 'start'. add host 127.0.0.1: gateway lo0 fib 0: route already in table add host cwfw3: gateway 10.1.2.254 /etc/rc: WARNING: route_gp_router not found. add net default: gateway 10.1.1.254 Additional inet routing options: ignore ICMP redirect=YES log ICMP redirect=YES/etc/rc: WARNING: $arpproxy_all is not set properly - see rc.conf(5). . add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 add net default: gateway fc00:1:1:1::254 fib 0: route already in table /etc/rc: WARNING: $router_enable is obsolete. Use $routed_enable instead. /etc/rc: WARNING: $router is obsolete. Use $routed_program instead. /etc/rc: WARNING: $router_flags is obsolete. Use $routed_flags instead. Starting rtsold. /etc/rc: WARNING: $cloudinit_enable is not set properly - see rc.conf(5). Creating and/or trimming log files. Starting syslogd. Setting date via ntp. 23 Jan 21:30:22 ntpdate[2394]: step time server fc00:1:1:1::fffe offset -0.798374 sec Starting rpcbind. NFS access cache time=0 Starting kdc. Jan 23 21:30:50 cwsys krb5kdc[2476]: preauth pkinit failed to initialize: PKINIT initialization failed: No pkinit_identity supplied for realm CWSENT.COM Jan 23 21:30:50 cwsys krb5kdc[2476]: preauth spake failed to initialize: No SPAKE preauth groups configured Updating CPU Microcode... CPU: AMD Phenom(tm) II X4 945 Processor (3013.95-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x100f43 Family=0x10 Model=0x4 Stepping=3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M CA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3D Now!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW, IBS,SKINIT,WDT> SVM: NP,NRIP,NAsids=64 TSC: P-state invariant Done. No core dumps found. Setting NIS domain: cwsent.com. Starting ypserv. Starting ypbind. Clearing /tmp. Starting nfsuserd. Starting mountd. Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export/home/cy/freebsd': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export/home/cy/freebsd/svn': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export/home/cy/freebsd/svn/current': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export/home/cy/freebsd/svn/ntp': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export/home/cy/freebsd/svn/doc': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export/home/cy/freebsd/svn/ports': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export/home/cy/freebsd/svn/stable9': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export/home/cy/freebsd/svn/stable10': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export/home/cy/freebsd/svn/vendor': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export/home/cy/freebsd/svn/vendor-crypto': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export/home/cy/freebsd/svn/vendor-sys': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export3': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export4': symbolic link in export path or statfs failed Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export5': symbolic link in export path or statfs failed Jan 23 21:31:01 cwsys mountd[2568]: can't get address info for host cwsent_internal_hosts Jan 23 21:31:01 cwsys mountd[2568]: bad host cwsent_internal_hosts, skipping Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/ -ro -alldirs -maproot': no valid entries Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/export/nullfs/export/home/ftp/pub': symbolic link in export path or statfs failed Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/dsk02/src/cvs-ports/ports': symbolic link in export path or statfs failed Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/export/upgrade/root/usr/local': symbolic link in export path or statfs failed Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/export/upgrade/root/usr/compat': symbolic link in export path or statfs failed Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/export/upgrade/root/var/lib': symbolic link in export path or statfs failed Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/export/upgrade/root/var/qmail': symbolic link in export path or statfs failed Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/export/upgrade/root/var/db/pkg': symbolic link in export path or statfs failed Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/export/upgrade/root/var/db/ports': symbolic link in export path or statfs failed Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/export/upgrade/root/var/db/rarian': symbolic link in export path or statfs failed Starting nfsd. Starting statd. Jan 23 21:31:01 cwsys mountd[2568]: can't change attributes for /export: netcred already exists for given addr/mask Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/export -alldirs -maproot' Jan 23 21:31:02 cwsys mountd[2568]: can't change attributes for /export/home: netcred already exists for given addr/mask Jan 23 21:31:02 cwsys mountd[2568]: bad exports list line '/export/home -alldirs -maproot' Jan 23 21:31:02 cwsys mountd[2568]: can't change attributes for /export/home/cschuber: netcred already exists for given addr/mask Jan 23 21:31:02 cwsys mountd[2568]: bad exports list line '/export/home/cschuber -alldirs -maproot' Jan 23 21:31:02 cwsys mountd[2568]: can't change attributes for /export/home/cy: netcred already exists for given addr/mask Jan 23 21:31:02 cwsys mountd[2568]: bad exports list line '/export/home/cy -alldirs -maproot' Jan 23 21:31:02 cwsys mountd[2568]: can't change attributes for /export/local-ports: netcred already exists for given addr/mask Jan 23 21:31:02 cwsys mountd[2568]: bad exports list line '/export/local-ports -alldirs -maproot' Jan 23 21:31:02 cwsys mountd[2568]: can't change attributes for /export/obj: netcred already exists for given addr/mask Jan 23 21:31:02 cwsys mountd[2568]: bad exports list line '/export/obj -alldirs -maproot' Starting lockd. Starting amd. GEOM_MIRROR: Device gm1: rebuilding provider ada0s2 finished. /etc/rc: WARNING: $xrdp_sesman_enable is not set properly - see rc.conf(5). Starting default mousedmoused: unable to open /dev/psm0: No such file or directory . Starting local daemons:mounting late nullfs filesystems:reloading ldconfig:ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/krb5/lib /usr/local/kde4/lib /usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/dovecot /usr/local/lib/e2fsprogs /usr/local/lib/freeradius-3.0.19 /usr/local/lib/gcc10 /usr/local/lib/gcc48 /usr/local/lib/gcc5 /usr/local/lib/gcc6 /usr/local/lib/gcc8 /usr/local/lib/gcc9 /usr/local/lib/graphviz /usr/local/lib/httrack /usr/local/lib/itcl3.4 /usr/local/lib/jitsi/lib/native /usr/local/lib/mysql /usr/local/lib/mysql/plugin /usr/local/lib/nss /usr/local/lib/opencollada /usr/local/lib/perl5/5.26/mach/CORE /usr/local/lib/perl5/5.28/mach/CORE /usr/local/lib/perl5/5.30/mach/CORE /usr/local/lib/pgtcl /usr/local/lib/pidgin /usr/local/lib/pth /usr/local/lib/qt5 /usr/local/lib/samba4 /usr/local/lib/xrdp /usr/local/libexec/openldap /usr/local/llvm-devel/lib /usr/local/llvm60/lib /usr/local/llvm70/lib /usr/local/llvm80/lib /usr/local/llvm90/lib /usr/local/share/chromium 32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat starting local daemons: kadmindStopping mountd. Waiting for PIDS: 2578. Starting mountd. Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/home/cy/freebsd': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/home/cy/freebsd/svn': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/home/cy/freebsd/svn/current': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/home/cy/freebsd/svn/ntp': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/home/cy/freebsd/svn/doc': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/home/cy/freebsd/svn/ports': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/home/cy/freebsd/svn/stable9': symbolic link in exporJan 23 21:31:11 cwsys mountd[2700]: can't get address info for host cwsent_internal_hosts Jan 23 21:31:11 cwsys mountd[2700]: bad host cwsent_internal_hosts, skipping Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/ -ro -alldirs -mJan 23 21:31:12 cwsys mountd[2700]: can't change attributes for /export: netcred already exists for given addr/mask Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line '/export -alldirs -maproot' Jan 23 21:31:12 cwsys mountd[2700]: can't change attributes for /export/home: netcred already exists for given addr/mask Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line '/export/home -alldirs -maproot' Jan 23 21:31:12 cwsys mountd[2700]: can't change attributes for /export/hoJan 23 21:31:12 cwsys mountd[2700]: can't change attributes for /export/local-ports: netcred already exists for given addr/mask Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line '/export/local-ports -alldirs -maproot' Jan 23 21:31:12 cwt path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/home/cy/freebsd/svn/stable10': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/home/cy/freebsd/svn/vendor': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/home/cy/freebsd/svn/vendor-crypto': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/home/cy/freebsd/svn/vendor-sys': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export3': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export4': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export5': symbolic link in export path or statfs failed aproot': no valid entries Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/nullfs/export/home/ftp/pub': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/dsk02/src/cvs-ports/ports': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/upgrade/root/usr/local': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/upgrade/root/usr/compat': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/upgrade/root/var/lib': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/upgrade/root/var/qmail': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/upgrade/root/var/db/pkg': symbolic link in export path or statfs failed Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/upgrade/root/var/db/ports': symbolic link in export path or statfs failed me/cschuber: netcred already exists for given addr/mask Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line '/export/home/cschuber -alldirs -maproot' Jan 23 21:31:12 cwsys mountd[2700]: can't change attributes for /export/home/cy: netcred already exists for given addr/mask Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export/upgrade/root/var/db/rarian': symbolic link in export path or statfs failed Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line '/export/home/cy -alldirs -maproot' sys mountd[2700]: can't change attributes for /export/obj: netcred already exists for given addr/mask Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line '/exportSecurity policy loaded: MAC/ntpd (mac_ntpd) /obj -alldirs -maproot' vfs.zfs.arc_meta_limit: 1810719744 -> 7242878976 . . Starting lpd. chkprintcap: foomatic: /var/spool/lpd/foomatic: No such file or directory chkprintcap: hpl7780: /var/spool/lpd/hpl7780: No such file or directory chkprintcap: hp5940-raw: /var/spool/lpd/hp5940: No such file or directory lpd: 3 errors in printcap file, exiting /etc/rc: WARNING: failed to start lpd Updating motd:. Mounting late filesystems:. Starting nscd. Starting ntpd. Updating /var/run/os-release done. Starting powerd. Starting yppasswdd. rpc.yppasswdd: master of passwd.byname is slippy, but we are cwsys rpc.yppasswdd: this host is not the NIS master server for the cwsent.com domain -- aborting /etc/rc: WARNING: failed to start yppasswdd Starting doinkd. Starting nut_upsmon. Network UPS Tools upsmon 2.7.4 kill: No such process UPS: cps_at_cwfw (master) (power value 1) UPS: cps_at_cwfw2 (master) (power value 1) Using power down flag file /var/run/nut_killpower Starting smartd. Performing sanity check on sshd configuration. Error loading host key "/etc/ssh/ssh_host_rsa_key": invalid format Error loading host key "/etc/ssh/ssh_host_rsa_key": invalid format Could not load host key: /etc/ssh/ssh_host_rsa_key Starting sshd. Error loading host key "/etc/ssh/ssh_host_rsa_key": invalid format Error loading host key "/etc/ssh/ssh_host_rsa_key": invalid format Could not load host key: /etc/ssh/ssh_host_rsa_key /etc/rc: WARNING: $pfstatd_enable is not set properly - see rc.conf(5). Configuring vt: keyrate blanktime screensaver allscreens. doveconf: Error: t_readlink(/var/run/dovecot/dovecot.conf) failed: readlink() failed: No such file or directory Starting sendmail. Starting sendmail_msp_queue. /usr/local/etc/doormand/doormand.cf does not exist. Starting cron. /etc/rc: WARNING: $cloudinit_enable is not set properly - see rc.conf(5). cbsd: no such /cbsd.conf Starting anacron. /etc/rc: WARNING: $jail_enable is not set properly - see rc.conf(5). Local package initialization: cvsupd.: cannot open /usr/local/etc/cvsup/config.sh: No such file or directory jailserror: ed0: No such device exists (BIOCSETIF failed: Device not configured) Unable to read the configuration file: No such file or directory at /usr/local/lib/perl5/site_perl/Jail.pm line 50. Compilation failed in require at /usr/local/sbin/jailadmin Access to, or unauthorized use of data on this computer by any person other than authorized person(s) or owner(s) of an account is strictly prohibited and may result in legal action against such person. FreeBSD/amd64 (cwsys) (console) -- Cheers, Cy Schubert <Cy.Schubert_at_cschubert.com> FreeBSD UNIX: <cy_at_FreeBSD.org> Web: http://www.FreeBSD.org The need of the many outweighs the greed of the few.Received on Fri Jan 24 2020 - 12:02:46 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:22 UTC