Re: Current panics on connecting disks to a LSI-3108 controller

Willem Jan Withagen wrote:
> Hi,
> 
> I have this Supermicro SUPERSERVER®2028TP
> Which hold four nodes each with a X10DRT-PT motherboard
> and a LSI-3108 SAS controller connecting to 6 disks.
> 
> Trying to run the most recent current snapshot on it.
> # uname -a
> FreeBSD quadbox-d.digiware.nl 13.0-CURRENT FreeBSD 13.0-CURRENT #0 
> r363032: Thu Jul  9 04:13:17 UTC 2020 
> root_at_releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
> 
> I have installed the OS on a SATA flash DOM.
> Booting works fine as long as there are no disks connected to LSI-3108 
> controller.
> Booting with SAS disks connected results in a panic.
> Attaching a SAS disk to the LSI-3108 controller give a panic as well.
> 
> 
> 
> AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd
> mfi0: <Invader> port 0x6000-0x60ff mem 
> 0xc7300000-0xc730ffff,0xc7200000-0xc72fffff irq 26 at device
> 0.0 numa-domain 0 on pci3
> mfi0: Using MSI
> mfi0: Megaraid SAS driver Ver 4.23
> mfi0: FW MaxCmds = 928, limiting to 128
> mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0
> .....
> mfi0: 54944 (boot + 6s/0x0020/info) - Firmware initialization started 
> (PCI ID 005d/1000/0809/15d9)
> pcib4: <ACPI PCI-PCI bridge>mfi0: 54945 (boot + 6s/0x0020/info) - 
> Firmware version 4.290.00-4536
> 
> 
> I have posted screenshots of the panic at:
>      www.tegenbosch28.nl/FreeBSD/Crash-LSI3108
> 
> But basically it crashes in
>      mfi_tbolt_send_frame() +0x132
> 
> So is there anybody out there that can help me with analyzing and fixing 
> this panic?

I guess it's not the answer you are looking for, but you could try the 
mrsas driver and check if it's behaves better for you, by setting 'set 
hw.mfi.mrsas_enable=1' from loader prompt.