[Trying again: I missed removing a type of character (escape) beyond the [?25h removals. My choice of editor was not the best for the context and it was not obvious that the escapes were present.] I'll mostly just send the text that has the additional removals. The boot text with the error messages then is: U-Boot SPL 2020.07 (Jul 13 2020 - 12:12:14 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.3(): NOTICE: BL31: Built : 23:56:54, Apr 26 2020 NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) NOTICE: BL31: Found U-Boot DTB at 0x4092b68, model: Pine64+ NOTICE: PSCI: System suspend is unavailable alloc space exhausted U-Boot 2020.07 (Jul 13 2020 - 12:12:14 +0000) Allwinner Technology CPU: Allwinner A64 (SUN50I) Model: Pine64+ DRAM: 2 GiB MMC: mmc_at_1c0f000: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface7 eth0: ethernet_at_1c30000 starting USB... Bus usb_at_1c1a000: USB EHCI 1.00 Bus usb_at_1c1a400: USB OHCI 1.0 Bus usb_at_1c1b000: USB EHCI 1.00 Bus usb_at_1c1b400: USB OHCI 1.0 scanning bus usb_at_1c1a000 for devices... 1 USB Device(s) found scanning bus usb_at_1c1a400 for devices... 1 USB Device(s) found scanning bus usb_at_1c1b000 for devices... 3 USB Device(s) found scanning bus usb_at_1c1b400 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Hit any key to stop autoboot: 2 1 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... 38612 bytes read in 4 ms (9.2 MiB/s) Found EFI removable media binary efi/boot/bootaa64.efi Scanning disk mmc_at_1c0f000.blk... ** Unrecognized filesystem type ** Scanning disk usb_mass_storage.lun0... ** Unrecognized filesystem type ** ** Unrecognized filesystem type ** ** Unrecognized filesystem type ** Found 7 disks 7[r[999;999H[6n8BootOrder not defined EFI boot manager: Cannot load any image 695648 bytes read in 33 ms (20.1 MiB/s) [2J[1;1H[2J[1;1HConsoles: EFI console |/-\|/-\| Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk0p1: /-\|/-FreeBSD/arm64 EFI loader, Revision 1.1 Command line arguments: loader.efi Image base: 0xb8e63000 EFI version: 2.80 EFI Firmware: Das U-Boot (rev 8224.1792) Console: comconsole (0) Load Path: /efi\boot\bootaa64.efi Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x403b,0x1ffe0) Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x403b,0x1ffe0) Setting currdev to disk0p1: \|/-\|/-\|/-Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x24400,0xe600000) Setting currdev to disk0p2: \|/-\|efipart_readwrite: rw=1, blk=123244224 size=32 status=7 /efipart_readwrite: rw=1, blk=148608 size=32 status=7 -efipart_readwrite: rw=1, blk=148545 size=32 status=7 efipart_readwrite: rw=1, blk=148545 size=32 status=7 \efipart_readwrite: rw=1, blk=148608 size=32 status=7 |efipart_readwrite: rw=1, blk=148545 size=32 status=7 efipart_readwrite: rw=1, blk=148545 size=32 status=7 /efipart_readwrite: rw=1, blk=148608 size=32 status=7 -efipart_readwrite: rw=1, blk=148545 size=32 status=7 efipart_readwrite: rw=1, blk=148545 size=32 status=7 ERROR: cannot open /boot/lua/loader.lua: no such file or directory. Type '?' for a list of commands, 'help' for more detailed help. OK The contrasting RPi3B text near the area with first errors above: \|/-\|/-\|/-Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x24400,0xe600000) Setting currdev to disk0p2: \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|Loading /boot/defaults/loader.conf /-\|/-\Loading /boot/defaults/loader.conf Loading /boot/device.hints |/-\|/-\|/-\Loading /boot/loader.conf |/-\Loading /boot/loader.conf.local (I'll not list more.) For reference: # gpart show -p => 63 249737153 mmcsd0 MBR (119G) 63 16380 - free - (8.0M) 16443 131040 mmcsd0s1 fat32lba [active] (64M) 147483 997 - free - (499K) 148480 241172480 mmcsd0s2 freebsd (115G) 241320960 8416256 - free - (4.0G) => 0 241172480 mmcsd0s2 BSD (115G) 0 230686720 mmcsd0s2a freebsd-ufs (110G) 230686720 10485760 - free - (5.0G) => 40 468862048 da0 GPT (224G) 40 2008 - free - (1.0M) 2048 413138944 da0p1 freebsd-ufs (197G) 413140992 6291456 da0p2 freebsd-swap (3.0G) 419432448 6291456 da0p4 freebsd-swap (3.0G) 425723904 43138184 - free - (21G) # find /boot/efi/ -print | sort | more /boot/efi/ /boot/efi/COPYING.linux /boot/efi/EFI /boot/efi/EFI/BOOT /boot/efi/EFI/BOOT/bootaa64.efi /boot/efi/LICENCE.broadcom /boot/efi/System Volume Information /boot/efi/System Volume Information/WPSettings.dat /boot/efi/armstub8.bin /boot/efi/bcm2710-rpi-2-b.dtb /boot/efi/bcm2710-rpi-3-b-plus.dtb /boot/efi/bcm2710-rpi-3-b.dtb /boot/efi/bcm2710-rpi-cm3.dtb /boot/efi/bootcode.bin /boot/efi/config.txt /boot/efi/dtb /boot/efi/dtb/allwinner /boot/efi/dtb/allwinner/sun50i-a64-pine64-lts.dtb /boot/efi/dtb/allwinner/sun50i-a64-pine64-plus.dtb /boot/efi/dtb/allwinner/sun50i-a64-pine64.dtb /boot/efi/dtb/allwinner/sun50i-a64-pinebook.dtb /boot/efi/dtb/allwinner/sun50i-a64-sopine-baseboard.dtb /boot/efi/dtb/overlays /boot/efi/dtb/overlays/spigen-rpi3.dtbo /boot/efi/dtb/overlays/sun50i-a64-opp.dtbo /boot/efi/dtb/overlays/sun50i-a64-pwm.dtbo /boot/efi/dtb/overlays/sun50i-a64-rpwm.dtbo /boot/efi/dtb/overlays/sun50i-a64-spi0-spigen.dtbo /boot/efi/dtb/overlays/sun50i-a64-timer.dtbo /boot/efi/fixup.dat /boot/efi/overlays /boot/efi/overlays/disable-bt.dtbo /boot/efi/overlays/mmc.dtbo /boot/efi/overlays/pwm.dtbo /boot/efi/start.elf /boot/efi/u-boot.bin (Where /boot/efi refers to /dev/mmcsd0s1 .) I forgot to indicate: that the context is based on head -r363123 FreeBSD and -r542111 ports. === Mark Millard marklmi at yahoo.com ( dsl-only.net went away in early 2018-Mar)Received on Fri Jul 17 2020 - 04:16:00 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:24 UTC