On 2/11/21 7:46 PM, Dennis Clarke via freebsd-current wrote: > On 2/11/21 8:57 PM, Gary Palmer wrote: >> On Thu, Feb 11, 2021 at 05:34:40PM -0700, Russell L. Carter wrote: >>> Greetings, >>> >>> I really want to jump from stable/12 to stable/13 but one thing is >>> causing a hesitancy. And that is, my main raidz2 system has >>> a system boot zfs mirror pair that has boot partition size >>> (Mediasize) of 64K, and when I tried to zpool upgrade that pool a >>> year or 2 ago I got some scary message something like "boot >>> partition size is not large enough". I asked about this on the >>> lists but never received an answer. So, laziness required me >>> to ignore the problem and not zpool upgrade any of my 15 or so >>> zpools in the interim. >>> >>> A few weeks ago I tried to make buildworld/installworld upgrade >>> 12->13 but the boot failed in the mounting filesystems phase with it >>> couldn't find a bootable target. So after restoring 12 I decided >>> to wait a bit. In the interim I have upgraded every zpool but that >>> one system pool. All the other freebsd-boot partitions have a size >>> of 512K. >>> >>> So what is the current advice? Is a freebsd-boot partition size >>> of 64K laughably obsolete, and I should get with the program and >>> repartition those disks, or can I march blindly into the upgrade? >>> >>> I guess I just want to understand where these sizes are going in >>> the future. >> >> Most layouts put a swap partition after the boot partition. If >> that is the case for you also, if you can disable the swapping to the >> swap partition you can probably increase boot and reduce swap size >> pretty easily. Otherwise you're probably going to have to split >> the mirror, repartition one drive, rebuild the mirror, reboot onto >> that drive and then do the same to the other drive. I've done it >> before on a headless system in a remote DC. With planning it's >> perfectly doable. I think I built a test vm in VirtualBox and >> made sure it all worked on that before trying it for real. >> > > The process is trivial with ZFS and a mirror setup. No need to reboot. > Think of the mirror as a "left" and "right" side. If you have a three > way mirror than you are singing in the rain. Regardless just break the > mirror. Do whatever you want with the disks that are now free and clear > of the previous mirror config. Use gpart and set them up with whatever > you need. Then attach the disk(s) back onto the mirror and wait for the > thing to re-silver. Run a scrub if you want. Depends on the size. Just > know that a large amount of storage ( more than 64T ) will take a long > time to scrub and for that matter a long time to re-silver. Maybe a day. > Once everything is re-synced as a mirror just repeat the process on the > other side of the mirror. No need to reboot until you feel like testing > the whole show. > > This sort of situation is also a good reason to use three way mirrors > with a hot spare pool. When possible. Makes the whole process entirely > worry free and nothing more than a cup of coffee to ponder it. > > For the sake of details what does "gpart show" report? Here you go: root_at_terpsichore> gpart show => 34 625142381 da0 GPT (298G) 34 128 1 freebsd-boot (64K) 162 8388608 2 freebsd-swap (4.0G) 8388770 616753645 3 freebsd-zfs (294G) => 34 625142381 da1 GPT (298G) 34 128 1 freebsd-boot (64K) 162 8388608 2 freebsd-swap (4.0G) 8388770 616753645 3 freebsd-zfs (294G) => 34 5860533101 da2 GPT (2.7T) 34 6 - free - (3.0K) 40 5860533088 1 freebsd-zfs (2.7T) 5860533128 7 - free - (3.5K) => 40 5860533088 da3 GPT (2.7T) 40 5860533080 1 freebsd-zfs (2.7T) 5860533120 8 - free - (4.0K) => 40 5860533088 da4 GPT (2.7T) 40 5860533088 1 freebsd-zfs (2.7T) => 40 5860533088 da5 GPT (2.7T) 40 5860533088 1 freebsd-zfs (2.7T) => 40 5860533088 da6 GPT (2.7T) 40 5860533088 1 freebsd-zfs (2.7T) => 40 5860533088 da7 GPT (2.7T) 40 5860533088 1 freebsd-zfs (2.7T) root_at_terpsichore> I'm interested in any comments, if appropriate. This now 7(!!) year old system with 6 drive replacements over time on the raidz2, quite tiny and I guess entirely obsolete. But it's paid for, does its job. These days I might go with a 2 or 3 drive mirror. Thanks, Russell > > > Dennis Clarke > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >Received on Fri Feb 12 2021 - 02:13:37 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:27 UTC