On 2/26/2021 4:25 PM, Ryan Moeller wrote: > On 2/26/21 5:14 PM, Rebecca Cran wrote: >> I'm seeing a mismatch on 14-CURRENT between 'zpool status' saying I >> have features that aren't enabled, and 'zpool upgrade' which says I >> don't. >> >> [bcran_at_smic ~]$ zpool status >> pool: spool >> state: ONLINE >> status: Some supported and requested features are not enabled on the >> pool. >> The pool can still be used, but some features are unavailable. >> action: Enable all features using 'zpool upgrade'. Once this is done, >> the pool may no longer be accessible by software that does >> not support >> the features. See zpool-features(5) for details. >> scan: scrub repaired 0B in 01:20:51 with 0 errors on Thu Feb 11 >> 16:48:07 2021 >> config: >> >> NAME STATE READ WRITE CKSUM >> spool ONLINE 0 0 0 >> mirror-0 ONLINE 0 0 0 >> ada0p2 ONLINE 0 0 0 >> ada1p2 ONLINE 0 0 0 >> ada2p2 ONLINE 0 0 0 >> ada3p2 ONLINE 0 0 0 >> mirror-1 ONLINE 0 0 0 >> ada4p2 ONLINE 0 0 0 >> ada5p2 ONLINE 0 0 0 >> ada6p2 ONLINE 0 0 0 >> ada7p2 ONLINE 0 0 0 >> >> errors: No known data errors >> >> [bcran_at_smic ~]$ sudo zpool upgrade spool >> This system supports ZFS pool feature flags. >> >> Pool 'spool' already has all supported and requested features enabled. > > > Should be fixed now, see https://reviews.freebsd.org/D28935 Great - thanks! -- Rebecca CranReceived on Fri Feb 26 2021 - 23:35:36 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:27 UTC