Re: cp(1) of large files is causing 100% CPU utilization and poor transfer

From: Matthias Apitz <guru_at_unixarea.de>
Date: Sat, 2 Jan 2021 17:12:02 +0100
El día sábado, enero 02, 2021 a las 09:06:24a. m. -0700, Alan Somers escribió:

> > As I said, it can be reproduced using only the local file system. This
> > was setup recently on a SSD:
> >
> > # dmesg | grep ada0
> > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> > ada0: <TS512GMTS430S R0906A> ACS-2 ATA SATA 3.x device
> > ada0: Serial Number F995890846
> > ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)
> > ada0: Command Queueing enabled
> > ada0: 488386MB (1000215216 512 byte sectors)
> >
> > and by this procedure:
> >
> > # gpart create -s gpt ada0
> > # gpart add -t freebsd-boot -s 512k -a4k -l ssdboot ada0
> > # gpart bootcode -b /boot/pmbr -p /boot/gptboot -i1 ada0
> > # gpart add -t freebsd-ufs -l ssdrootfs -b 1m -s 2g ada0
> > # gpart add -t freebsd-ufs -l ssdvarfs -a 1m -s 2g ada0
> > # gpart add -t freebsd-ufs -l ssdusrfs -a 1m ada0
> > # newfs -U -t /dev/gpt/ssdrootfs
> > # newfs -U -t /dev/gpt/ssdvarfs
> > # newfs -U -t /dev/gpt/ssdusrfs
> >
> > # gpart show -l ada0
> > =>        40  1000215136  ada0  GPT  (477G)
> >           40        1024     1  ssdboot  (512K)
> >         1064         984        - free -  (492K)
> >         2048     4194304     2  ssdrootfs  (2.0G)
> >      4196352     4194304     3  ssdvarfs  (2.0G)
> >      8390656    16777216     4  ssdswap  (8.0G)
> >     25167872   975046656     5  ssdusrfs  (465G)
> >   1000214528         648        - free -  (324K)
> >
> > # mount -t ufs
> > /dev/gpt/ssdrootfs on / (ufs, local, soft-updates)
> > /dev/gpt/ssdvarfs on /var (ufs, local, soft-updates)
> > /dev/gpt/ssdusrfs on /usr (ufs, local, soft-updates)
> >
> > When I run in the /usr fs the command
> >
> > # cp -p guru-20210102.tar.gz xxx
> >
> > it copies around 168M per minute.
> >

> Is that copying from /usr to /usr, or from /usr to /var or /?

# cd /home/backups
# cp -p guru-20210102.tar.gz xxx

i.e. from /usr to /usr.

	matthias

-- 
Matthias Apitz, ✉ guru_at_unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
¡Con Cuba no te metas!  «»  Don't mess with Cuba!  «»  Leg Dich nicht mit Kuba an!
http://www.cubadebate.cu/noticias/2020/12/25/en-video-con-cuba-no-te-metas/
Received on Sat Jan 02 2021 - 15:12:04 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:26 UTC