Hi! I am trying to migrate from 12/stable to main_at_163f4f1573 and after system (world + kernel + bootloaders) update UEFI does not work: it reads loader.conf, but a bit strange: - logo is off - OK - font colour does not change - not OK then black screen, no connect via ssh, after h/w reset - no fsck run, I assume that disk was not mounted. UEFI loader shows console = serial, even if I disable serial - FAIL to boot. Legacy loader console = Video - boot OK. On VirtualBox UEFI uses console = Video, with all same configs - boot OK. (graphics mode, never seen it before) 12/stable on same H/W and almost same configs boot using UEFI - boot OK (console = Video, looks like text mode). HW: APU A10-6700, 5600XT (display connected here). I allready had try: 1. dd /dev/zero to efi part and run /usr/src/tools/boot/install-boot.sh -b uefi -f ufs -s gpt ada0 to ensure that latest loader witout artifacts will be used; 2. Remove my loader.conf, loader.conf.local; 3. hw.vga.textmode=“0” - was set in my initial loader.conf; 4. If I copy userboot.so and userboot_lua.so from 12/stable then UEFI boot OK, but show that console = serial and use text mode. My configs: http://www.netlab.linkpc.net/download/software/os_cfg/FBSD/13/base/boot/loader.conf http://www.netlab.linkpc.net/download/software/os_cfg/FBSD/13/wks/boot/loader.conf.local http://www.netlab.linkpc.net/download/software/os_cfg/FBSD/13/base/etc/src.confReceived on Thu Jan 07 2021 - 10:58:10 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:26 UTC