> On 13 May 2021, at 11:49, Henri Hennebert <hlh_at_restart.be> wrote: > ... ... >>> Do you see an rtsx message before this mmc0 ? >>> >>>> mmc0: detached >>>> ugen0.1: <0x8086 >> Yes. >> rtsx0: <2.0c Realtek RT5522A PCI MMC/SD Card reader mem 0xf4100000-0xf4100fff at device 0.0 on pci1> >> rtsx0: Card present >> mmc0: <MMC/SD bus> on rtsx0 >> rtsx0: Interrupt card inserted/removed >> rtsx0: Card absent > > The "card present" and just after the iterrupt and "card absent" seems strange... > > Can you please show the dmesg after a warm reboot with no card inserted. > Dmesg below: It is a slightly modified kernel with a few debug printfs in them. ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-CURRENT #3 main-n246598-30659d1dcbc-dirty: Thu May 13 06:14:52 CEST 2021 marc_at_devnovo:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 FreeBSD clang version 11.0.1 (git_at_github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) WARNING: WITNESS option enabled, expect reduced performance. VT(efifb): resolution 1920x1080 CPU: Intel(R) Core(TM) i7-6500U CPU _at_ 2.50GHz (2592.08-MHz K8-class CPU) Origin="GenuineIntel" Id=0x406e3 Family=0x6 Model=0x4e Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16430579712 (15669 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TP-N1K > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 1 2 3 Timecounter "TSC-low" frequency 1296042202 Hz quality 1000 random: entropy device external interface WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd1 at kbdmux0 mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xb703e000-0xb703e01e smbios0: Version: 2.8, BCD Revision: 2.8 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <LENOVO TP-N1K> acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 Event timer "HPET1" frequency 24000000 Hz quality 440 Event timer "HPET2" frequency 24000000 Hz quality 440 Event timer "HPET3" frequency 24000000 Hz quality 440 Event timer "HPET4" frequency 24000000 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem 0xf2000000-0xf2ffffff,0xc0000000-0xdfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xf4220000-0xf422ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xe080-0xe087,0xe088-0xe08b,0xe060-0xe07f mem 0xf4248000-0xf4249fff,0xf424f000-0xf424f0ff,0xf424d000-0xf424d7ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported ahcich1: <AHCI channel> at channel 1 on ahci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 rtsx0: <2.0c Realtek RTS522A PCI MMC/SD Card Reader> mem 0xf4100000-0xf4100fff at device 0.0 on pci1 rtsx0: Card absent pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci3: <ACPI PCI bus> on pcib3 vgapci1: <VGA-compatible display> port 0xd000-0xd07f mem 0xf3000000-0xf3ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff at device 0.0 on pci3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xf4240000-0xf4243fff,0xf4230000-0xf423ffff at device 31.3 on pci0 em0: <Intel(R) I219-V SPT> mem 0xf4200000-0xf421ffff at device 31.6 on pci0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: 54:ee:75:cb:0d:e3 em0: netmap queues/slots: TX 1/1024, RX 1/1024 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. psm0: model Synaptics Touchpad, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 hwpstate_intel0: <Intel Speed Shift> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <Realtek ALC293 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC293 (Analog)> at nid 20 and 26 on hdaa0 pcm1: <Realtek ALC293 (Analog)> at nid 21 and 18 on hdaa0 hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 WARNING: WITNESS option enabled, expect reduced performance. ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0Trying to mount root from zfs:zroot/ROOT/default []... on usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Root mount waiting for: usbus0 CAM ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 ada0: <Samsung SSD 850 PRO 512GB EXM04B6Q> ACS-2 ATA SATA 3.x device ada0: Serial Number S39FNX0J625463T ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 488386MB (1000215216 512 byte sectors) ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> uhub0: 18 ports with 18 removable, self powered Root mount waiting for: usbus0 ugen0.2: <Realtek Bluetooth Radio> at usbus0 Root mount waiting for: usbus0 ugen0.3: <vendor 0x8087 product 0x0a2b> at usbus0 ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 Root mount waiting for: usbus0 ugen0.5: <vendor 0x138a product 0x0017> at usbus0 pchtherm0: <Skylake PCH Thermal Subsystem> mem 0xf424b000-0xf424bfff at device 20.2 on pci0 ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xefa0-0xefbf mem 0xf424e000-0xf424e0ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xf4000000-0xf4001fff at device 0.0 on pci2 iwm0: hw rev 0x200, fw ver 22.361476.0, address f4:8c:50:50:22:83 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: Embedded MOF found ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20210331/nsarguments-361) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: Embedded MOF found ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20210331/nsarguments-361) acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: Embedded MOF found ACPI: \134_SB.WMI3.WQBC: 1 arguments were passed to a non-method ACPI object (Buffer) (20210331/nsarguments-361) lo0: link state changed to UP em0: link state changed to UP ubt0 on uhub0 ubt0: <Bluetooth Radio> on usbus0 ubt1 on uhub0 ubt1: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.01, addr 2> on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() Security policy loaded: MAC/ntpd (mac_ntpd) Best regards, Marc VeldmanReceived on Thu May 13 2021 - 09:58:08 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:28 UTC