Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Tue Apr  1 20:04:55 GMT 2003
    root@junket.americas.cpqcorp.net:/usr/obj/usr/src/sys/BL10E
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04e3000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04e30a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 889848904 Hz
CPU: Mobile Intel(R) Pentium(R) III CPU - M   900MHz (889.85-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b4  Stepping = 4
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536854528 (511 MB)
avail memory = 516214784 (492 MB)
Allocating major#253 to "net"
Allocating major#252 to "g_ctl"
Allocating major#251 to "pci"
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ I03     > on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE31
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
pcibios: BIOS version 2.10
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 1.0 (no driver attached)
pci0: <display, VGA> at device 2.0 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x2800-0x283f mem 0xc4e00000-0xc4efffff,0xc4ffe000-0xc4ffefff irq 10 at device 3.0 on pci0
fxp0: Ethernet address 00:08:02:a3:ff:82
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x2840-0x287f mem 0xc4c00000-0xc4cfffff,0xc4dff000-0xc4dfffff irq 11 at device 4.0 on pci0
fxp1: Ethernet address 00:08:02:a3:ff:83
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xc4bff000-0xc4bfffff irq 7 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI1 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib1
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0 port 0x2f8-0x2ff irq 3 on acpi0
sio0: type 16550A, console
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Allocating major#250 to "devstat"
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xe0000-0xe7fff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 38154MB <HITACHI_DK23EB-40> [77520/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a