Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-BETA3 #0: Sat Aug 22 02:00:45 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff813fd000. Preloaded mfs_root "/boot/mfsroot" at 0xffffffff813fd250. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2100015639 Hz CPU: Quad-Core AMD Opteron(tm) Processor 1352 (2100.02-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100f23 Stepping = 3 Features=0x178bfbff Features2=0x802009 AMD Features=0xee500800 AMD Features2=0x7ff TSC: P-state invariant L1 2MB data TLB: 48 entries, fully associative L1 2MB instruction TLB: 16 entries, fully associative L1 4KB data TLB: 48 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB data TLB: 128 entries, 2-way associative L2 2MB instruction TLB: 0 entries, 2-way associative L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 8589934592 (8192 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000001427000 - 0x00000000cff9ffff, 3468136448 bytes (846713 pages) 0x00000000cffae000 - 0x00000000cffaffff, 8192 bytes (2 pages) 0x0000000100000000 - 0x000000021f8b3fff, 4824186880 bytes (1177780 pages) avail memory = 8250327040 (7868 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target INTR: Adding local APIC 2 as a target INTR: Adding local APIC 3 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 APIC: CPU 2 has ACPI ID 3 APIC: CPU 3 has ACPI ID 4 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ACPI: RSDP 0xf9910 00024 (v2 HP ) ACPI: XSDT 0xcffb0100 0007C (v1 HP ProLiant 20080526 FOXC 00000097) ACPI: FACP 0xcffb0290 000F4 (v4 HP ProLiant 20080526 FOXC 00000097) ACPI: DSDT 0xcffb0680 04D97 (v2 HP ProLiant 00000800 INTL 20051117) ACPI: FACS 0xcffbe000 00040 ACPI: APIC 0xcffb0390 00086 (v2 HP ProLiant 20080526 FOXC 00000097) ACPI: MCFG 0xcffb0470 0003C (v1 HP ProLiant 20080526 FOXC 00000097) ACPI: SPMI 0xcffb04b0 00041 (v5 HP ProLiant 20080526 FOXC 00000097) ACPI: OEMB 0xcffbe040 00071 (v1 HP ProLiant 20080526 FOXC 00000097) ACPI: HPET 0xcffb5420 00038 (v1 HP ProLiant 20080526 FOXC 00000097) ACPI: EINJ 0xcffb5460 00130 (v1 HP ProLiant 20080526 FOXC 00000097) ACPI: BERT 0xcffb55f0 00030 (v1 HP ProLiant 20080526 FOXC 00000097) ACPI: ERST 0xcffb5620 001B0 (v1 HP ProLiant 20080526 FOXC 00000097) ACPI: HEST 0xcffb57d0 000A8 (v1 HP ProLiant 20080526 FOXC 00000097) ACPI: SSDT 0xcffb5880 00A30 (v1 HP ProLiant 20080526 FOXC 00000097) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level MADT: Interrupt override: source 14, irq 14 MADT: Interrupt override: source 15, irq 15 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400 wlan: <802.11 Link Layer> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: null: io: random: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff800001a000 pa 0x4000 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIMC -> bus 0 dev 1 func 0 acpi0: reservation of fec00000, 1000 (3) failed acpi0: reservation of fee00000, 1000 (3) failed ACPI timer: 1/1 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 Validation 0 255 N 0 20 After Disable 0 255 N 0 20 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 Validation 0 255 N 0 20 After Disable 0 255 N 0 20 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route Timecounter "HPET" frequency 25000000 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x10de, dev=0x0369, revid=0xa2 domain=0, bus=0, slot=0, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0360, revid=0xa3 domain=0, bus=0, slot=1, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type I/O Port, range 32, base 0x2f00, size 7, enabled found-> vendor=0x10de, dev=0x0368, revid=0xa3 domain=0, bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x2900, size 6, enabled map[20]: type I/O Port, range 32, base 0x2d00, size 6, enabled map[24]: type I/O Port, range 32, base 0x2e00, size 6, enabled pcib0: matched entry for 0.1.INTA (src \\_SB_.LSMB:0) pci_link13: Picked IRQ 21 with weight 0 pcib0: slot 1 INTA routed to irq 21 via \\_SB_.LSMB found-> vendor=0x10de, dev=0x036c, revid=0xa1 domain=0, bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfcebf000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.LUB0:0) pci_link8: Picked IRQ 22 with weight 0 pcib0: slot 2 INTA routed to irq 22 via \\_SB_.LUB0 found-> vendor=0x10de, dev=0x036d, revid=0xa2 domain=0, bus=0, slot=2, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfcebec00, size 8, enabled pcib0: matched entry for 0.2.INTB (src \\_SB_.LUB2:0) pci_link10: Picked IRQ 23 with weight 0 pcib0: slot 2 INTB routed to irq 23 via \\_SB_.LUB2 found-> vendor=0x10de, dev=0x037f, revid=0xa3 domain=0, bus=0, slot=5, func=0 class=01-01-85, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0xdd80, size 3, enabled map[14]: type I/O Port, range 32, base 0xdd00, size 2, enabled map[18]: type I/O Port, range 32, base 0xdc00, size 3, enabled map[1c]: type I/O Port, range 32, base 0xdb80, size 2, enabled map[20]: type I/O Port, range 32, base 0xdb00, size 4, enabled map[24]: type Memory, range 32, base 0xfcebd000, size 12, enabled pcib0: matched entry for 0.5.INTA (src \\_SB_.LSA0:0) pci_link15: Picked IRQ 21 with weight 1 pcib0: slot 5 INTA routed to irq 21 via \\_SB_.LSA0 found-> vendor=0x10de, dev=0x037f, revid=0xa3 domain=0, bus=0, slot=5, func=1 class=01-01-85, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0xda80, size 3, enabled map[14]: type I/O Port, range 32, base 0xda00, size 2, enabled map[18]: type I/O Port, range 32, base 0xd980, size 3, enabled map[1c]: type I/O Port, range 32, base 0xd900, size 2, enabled map[20]: type I/O Port, range 32, base 0xd880, size 4, enabled map[24]: type Memory, range 32, base 0xfcebc000, size 12, enabled pcib0: matched entry for 0.5.INTB (src \\_SB_.LSA1:0) pci_link16: Picked IRQ 22 with weight 1 pcib0: slot 5 INTB routed to irq 22 via \\_SB_.LSA1 found-> vendor=0x10de, dev=0x037f, revid=0xa3 domain=0, bus=0, slot=5, func=2 class=01-01-85, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=c, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0xd800, size 3, enabled map[14]: type I/O Port, range 32, base 0xd780, size 2, enabled map[18]: type I/O Port, range 32, base 0xd700, size 3, enabled map[1c]: type I/O Port, range 32, base 0xd680, size 2, enabled map[20]: type I/O Port, range 32, base 0xd600, size 4, enabled map[24]: type Memory, range 32, base 0xfcebb000, size 12, enabled pcib0: matched entry for 0.5.INTC (src \\_SB_.LSA2:0) pci_link18: Picked IRQ 23 with weight 1 pcib0: slot 5 INTC routed to irq 23 via \\_SB_.LSA2 found-> vendor=0x10de, dev=0x0370, revid=0xa2 domain=0, bus=0, slot=6, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0004, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns) found-> vendor=0x10de, dev=0x0376, revid=0xa3 domain=0, bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0374, revid=0xa3 domain=0, bus=0, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0374, revid=0xa3 domain=0, bus=0, slot=12, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0378, revid=0xa3 domain=0, bus=0, slot=13, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0375, revid=0xa3 domain=0, bus=0, slot=14, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0377, revid=0xa3 domain=0, bus=0, slot=15, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x1022, dev=0x1200, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1201, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1202, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1203, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1204, revid=0x00 domain=0, bus=0, slot=24, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: at device 0.0 (no driver attached) isab0: port 0x2f00-0x2f7f at device 1.0 on pci0 isa0: on isab0 pci0: at device 1.1 (no driver attached) ohci0: mem 0xfcebf000-0xfcebffff irq 22 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfcebf000 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 49 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: on ohci0 ehci0: mem 0xfcebec00-0xfcebecff irq 23 at device 2.1 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfcebec00 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 50 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: on ehci0 atapci0: port 0xdd80-0xdd87,0xdd00-0xdd03,0xdc00-0xdc07,0xdb80-0xdb83,0xdb00-0xdb0f mem 0xfcebd000-0xfcebdfff irq 21 at device 5.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xdb00 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcebd000 ata2: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xdd80 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xdd00 ata2: SATA connect time=0ms status=00000123 ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xdc00 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xdb80 ata3: SATA connect time=0ms status=00000123 ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: [MPSAFE] ata3: [ITHREAD] atapci1: port 0xda80-0xda87,0xda00-0xda03,0xd980-0xd987,0xd900-0xd903,0xd880-0xd88f mem 0xfcebc000-0xfcebcfff irq 22 at device 5.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd880 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcebc000 ata4: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xda80 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xda00 ata4: SATA connect time=0ms status=00000123 ata4: reset tp1 mask=01 ostat0=50 ostat1=00 ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 stat0=50 stat1=00 devices=0x1 ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd980 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd900 ata5: SATA connect time=0ms status=00000123 ata5: reset tp1 mask=01 ostat0=50 ostat1=00 ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata5: reset tp2 stat0=50 stat1=00 devices=0x1 ata5: [MPSAFE] ata5: [ITHREAD] atapci2: port 0xd800-0xd807,0xd780-0xd783,0xd700-0xd707,0xd680-0xd683,0xd600-0xd60f mem 0xfcebb000-0xfcebbfff irq 23 at device 5.2 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd600 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcebb000 ata6: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd780 ata6: SATA connect time=0ms status=00000113 ata6: reset tp1 mask=01 ostat0=50 ostat1=00 ata6: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata6: reset tp2 stat0=50 stat1=00 devices=0x1 ata6: [MPSAFE] ata6: [ITHREAD] ata7: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd700 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd680 ata7: SATA connect time=0ms status=00000113 ata7: reset tp1 mask=01 ostat0=50 ostat1=00 ata7: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata7: reset tp2 stat0=00 stat1=00 devices=0x10000 ata7: [MPSAFE] ata7: [ITHREAD] pcib1: at device 6.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x0-0x0 pcib1: no prefetched decode pcib1: Subtractively decoded bridge. pci1: on pcib1 pci1: domain=0, physical bus=1 pcib2: at device 10.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci2: on pcib2 pci2: domain=0, physical bus=2 pcib3: at device 11.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x0-0x0 pcib3: no prefetched decode pci3: on pcib3 pci3: domain=0, physical bus=3 pcib4: at device 12.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xe000-0xefff pcib4: memory decode 0xfcf00000-0xfcffffff pcib4: no prefetched decode pci4: on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x8086, dev=0x10b9, revid=0x06 domain=0, bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfcfe0000, size 17, enabled pcib4: requested memory range 0xfcfe0000-0xfcffffff: good map[14]: type Memory, range 32, base 0xfcfc0000, size 17, enabled pcib4: requested memory range 0xfcfc0000-0xfcfdffff: good map[18]: type I/O Port, range 32, base 0xef80, size 5, enabled pcib4: requested I/O range 0xef80-0xef9f: in range pcib4: matched entry for 4.0.INTA (src \\_SB_.LNEA:0) pci_link4: Picked IRQ 16 with weight 0 pcib4: slot 0 INTA routed to irq 16 via \\_SB_.LNEA em0: port 0xef80-0xef9f mem 0xfcfe0000-0xfcffffff,0xfcfc0000-0xfcfdffff irq 16 at device 0.0 on pci4 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfcfe0000 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 52 em0: using IRQ 256 for MSI em0: Using MSI interrupt em0: [FILTER] em0: bpf attached em0: Ethernet address: 00:23:7d:fd:26:e4 pcib5: at device 13.0 on pci0 pcib5: domain 0 pcib5: secondary bus 16 pcib5: subordinate bus 16 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xfd000000-0xfdefffff pcib5: prefetched decode 0xfb000000-0xfbffffff pci16: on pcib5 pci16: domain=0, physical bus=16 found-> vendor=0x102b, dev=0x0522, revid=0x02 domain=0, bus=16, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x1010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Prefetchable Memory, range 32, base 0xfb000000, size 24, enabled pcib5: requested memory range 0xfb000000-0xfbffffff: good map[14]: type Memory, range 32, base 0xfdefc000, size 14, enabled pcib5: requested memory range 0xfdefc000-0xfdefffff: good map[18]: type Memory, range 32, base 0xfd000000, size 23, enabled pcib5: requested memory range 0xfd000000-0xfd7fffff: good pcib5: matched entry for 16.0.INTA (src \\_SB_.LNED:0) pci_link7: Picked IRQ 17 with weight 0 pcib5: slot 0 INTA routed to irq 17 via \\_SB_.LNED vgapci0: mem 0xfb000000-0xfbffffff,0xfdefc000-0xfdefffff,0xfd000000-0xfd7fffff irq 17 at device 0.0 on pci16 pcib6: at device 14.0 on pci0 pcib6: domain 0 pcib6: secondary bus 17 pcib6: subordinate bus 17 pcib6: I/O decode 0x0-0x0 pcib6: memory decode 0xfdf00000-0xfdffffff pcib6: no prefetched decode pci17: on pcib6 pci17: domain=0, physical bus=17 found-> vendor=0x14e4, dev=0x165a, revid=0x00 domain=0, bus=17, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfdff0000, size 16, enabled pcib6: requested memory range 0xfdff0000-0xfdffffff: good pcib6: matched entry for 17.0.INTA (src \\_SB_.LNEC:0) pci_link6: Picked IRQ 18 with weight 0 pcib6: slot 0 INTA routed to irq 18 via \\_SB_.LNEC pci0:17:0:0: failed to read VPD data. bge0: mem 0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci17 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdff0000 bge0: adjust device control 0x2000 -> 0x5000 bge0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 53 bge0: using IRQ 257 for MSI bge0: CHIP ID 0xa2000000; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E bge0: Disabling fastboot bge0: Disabling fastboot miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: OUI 0x0050ef, model 0x002d, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:23:7d:db:b6:d8 bge0: [MPSAFE] bge0: [ITHREAD] pcib7: at device 15.0 on pci0 pcib7: domain 0 pcib7: secondary bus 18 pcib7: subordinate bus 18 pcib7: I/O decode 0x0-0x0 pcib7: no prefetched decode pci18: on pcib7 pci18: domain=0, physical bus=18 acpi_button0: on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 54 uart0: [FILTER] uart0: fast interrupt atrtc1: port 0x70-0x71 on acpi0 atrtc1: registered as a time-of-day clock (resolution 1000000us) cpu0: on acpi0 cpu0: switching to generic Cx mode hwpstate0: on cpu0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 ex_isa_identify() ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed isa_probe_children: disabling PnP devices sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc7fff,0xca000-0xcafff on isa0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 56 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 atrtc0: at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: Warning: Couldn't map Interrupt. atrtc1: removed as time-of-day clock: clock atrtc has higher resolution atrtc0: registered as a time-of-day clock (resolution 1000000us) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 512326 -> 100000 procfs registered lapic: Divisor 2, Frequency 100000754 hz Timecounter "TSC" frequency 2100015639 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata2: Identifying devices: 00000001 ata2: New devices: 00000001 md0: Preloaded image 4194304 bytes at 0xffffffff80ffb600 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 uhub0: 10 ports with 10 removable, self powered ata2: reiniting channel .. ata2: SATA connect time=0ms status=00000123 ata2: reset tp1 mask=01 ostat0=58 ostat1=00 ata2: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: reinit done .. unknown: FAILURE - ATA_IDENTIFY timed out LBA=0 ata2: reiniting channel .. ata2: SATA connect time=0ms status=00000123 ata2: reset tp1 mask=01 ostat0=58 ostat1=00 ata2: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: reinit done .. unknown: FAILURE - ATA_IDENTIFY timed out LBA=0 ata3: Identifying devices: 00000001 ata3: New devices: 00000001 ata3: reiniting channel .. ata3: SATA connect time=0ms status=00000123 ata3: reset tp1 mask=01 ostat0=58 ostat1=00 ata3: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: reinit done .. unknown: FAILURE - ATA_IDENTIFY timed out LBA=0 uhub1: 10 ports with 10 removable, self powered ata3: reiniting channel .. ata3: SATA connect time=0ms status=00000123 ata3: reset tp1 mask=01 ostat0=58 ostat1=00 ata3: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: reinit done .. unknown: FAILURE - ATA_IDENTIFY timed out LBA=0 ata4: Identifying devices: 00000001 ata4: New devices: 00000001 ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad8: 1430799MB at ata4-master SATA300 ad8: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad8 ad8: nVidia check1 failed ad8: Adaptec check1 failed ad8: LSI (v3) check1 failed ad8: LSI (v2) check1 failed ad8: FreeBSD check1 failed ata5: Identifying devices: 00000001 ata5: New devices: 00000001 ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad10: 1430799MB at ata5-master SATA300 ad10: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad10 ad10: nVidia check1 failed ad10: Adaptec check1 failed ad10: LSI (v3) check1 failed ad10: LSI (v2) check1 failed ad10: FreeBSD check1 failed ata6: Identifying devices: 00000001 ata6: New devices: 00000001 ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad12: 238475MB at ata6-master SATA150 ad12: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad12 ad12: nVidia check1 failed ad12: Adaptec check1 failed ad12: LSI (v3) check1 failed ad12: LSI (v2) check1 failed ad12: FreeBSD check1 failed ata7: Identifying devices: 00010000 ata7: New devices: 00010000 ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acd0: DVDROM drive at ata7 as master acd0: read 8268KB/s (8268KB/s), 198KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm data disc ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 2 vector 48 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 3 vector 48 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 1 vector 49 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 49 msi: Assigning MSI IRQ 256 to local APIC 3 vector 49 WARNING: WITNESS option enabled, expect reduced performance. GEOM: ad12s1: geometry does not match label (255h,63s != 16h,63s). ugen0.2: at usbus0 ukbd0: on usbus0 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 ums0: on usbus0 ums0: 8 buttons and [XYZ] coordinates ID=0 Trying to mount root from ufs:/dev/md0 ct_to_ts([2009-08-31 16:42:19]) = 1251736939.000000000 start_init: trying /sbin/init