Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #10: Mon Sep  8 01:15:32 CEST 2003
    saturnero@pigra.saturnero.sat:/usr/obj/usr/src/sys/PIGRA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc052b000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc052b200.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc052b2ac.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc052b358.
Calibrating clock(s) ... i8254 clock: 1193653 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 447935528 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (447.94-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000552000 - 0x000000000fb49fff, 257916928 bytes (62968 pages)
avail memory = 255016960 (243 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fae00
bios32: Entry = 0xfb280 (c00fb280)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb2b0
pnpbios: Found PnP BIOS data at 0xc00fbe70
pnpbios: Entry = f0000:be98  Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 a5 72 00 c0 01 00 00 00 22 00 
00 01 80 00 03 01 ba 72 00 c0 c1 72 00 c0 ca 72 
00 c0 00 01 01 01 02 01 03 01 05 01 07 01 08 01 
09 01 0a 01 0b 01 0c 01 10 01 11 01 12 01 13 01 
VESA: 25 mode(s) found
VESA: v2.0, 8192k memory, flags:0x1, mode table:0xc04bdc62 (1000022)
VESA: Matrox Graphics Inc.
VESA: Matrox MGA-G200 00
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AWARD  AWRDACPI> on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003afc
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdda0
PCI-Only Interrupts: 5 10 11
Location  Bus Device Pin  Link  IRQs
slot 1      0   12    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 1      0   12    B   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 1      0   12    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 1      0   12    D   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   11    A   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   11    B   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   11    C   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   11    D   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    A   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    B   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    C   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    D   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 4      0    9    A   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 4      0    9    B   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 4      0    9    C   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 4      0    9    D   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   13    A   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   13    B   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   13    C   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   13    D   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    D   0x63  3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD  min = 2, max = 5, width = 3
ACPI timer looks BAD  min = 2, max = 5, width = 3
ACPI timer looks BAD  min = 2, max = 5, width = 3
ACPI timer looks BAD  min = 2, max = 16777211, width = 16777209
ACPI timer looks BAD  min = 2, max = 5, width = 3
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 1, max = 5, width = 4
ACPI timer looks BAD  min = 0, max = 5, width = 5
ACPI timer looks BAD  min = 1, max = 16777214, width = 16777213
ACPI timer looks BAD  min = 2, max = 5, width = 3
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.LNKB irq   0: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.LNKB irq   0: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.LNKB irq   0: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.LNKB irq   0: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.PCI0.LNKB irq   0: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq   0: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq   0: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
---- before setting priority for links ------------
\\_SB_.PCI0.LNKB:
	interrupts:	     3     4     5     6     7    10    11    12    14    15
	penalty:	  1770  1770  1470  1770  1770  1470  1470  1770 10770 10770
	references:	7
	priority:	0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.LNKB:
	interrupts:	     3     4     5     6     7    10    11    12    14    15
	penalty:	  1770  1770  1470  1770  1770  1470  1470  1770 10770 10770
	references:	7
	priority:	24360
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.LNKB irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.LNKB irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.LNKB irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.LNKB irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.PCI0.LNKB irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.LNKA irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq  11: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq   5: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq  10: [  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base e0000000, size 26, enabled
found->	vendor=0x8086, dev=0x7190, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7191, revid=0x02
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7110, revid=0x02
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000f000, size  4, enabled
found->	vendor=0x8086, dev=0x7111, revid=0x01
	bus=0, slot=7, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00009000, size  5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is routed to irq 10
found->	vendor=0x8086, dev=0x7112, revid=0x01
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=10
	map[90]: type 4, range 32, base 00005000, size  4, enabled
found->	vendor=0x8086, dev=0x7113, revid=0x02
	bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00009400, size  7, enabled
	map[14]: type 1, range 32, base ea000000, size  7, enabled
pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.LNKC)
pcib0: slot 10 INTA is routed to irq 5
found->	vendor=0x10b7, dev=0x9200, revid=0x74
	bus=0, slot=10, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00009800, size  5, enabled
pcib0: matched entry for 0.13.INTA (source \\_SB_.PCI0.LNKD)
pcib0: slot 13 INTA is routed to irq 10
found->	vendor=0x1102, dev=0x0002, revid=0x04
	bus=0, slot=13, func=0
	class=04-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=10
	powerspec 1  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00009c00, size  3, enabled
found->	vendor=0x1102, dev=0x7002, revid=0x01
	bus=0, slot=13, func=1
	class=09-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D3  current D0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xe4000000-0xe7ffffff
pcib1:   prefetched decode 0xe8000000-0xe8ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 3, range 32, base e8000000, size 24, enabled
	map[14]: type 1, range 32, base e4000000, size 14, enabled
	map[18]: type 1, range 32, base e5000000, size 23, enabled
pcib0: matched entry for 0.1.INTA (source \\_SB_.PCI0.LNKA)
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found->	vendor=0x102b, dev=0x0521, revid=0x01
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: reset tp3 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x50 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x50 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata1: reset tp3 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x9000-0x901f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9400-0x947f mem 0xea000000-0xea00007f irq 5 at device 10.0 on pci0
xl0: using memory mapped I/O
xl0: Ethernet address: 00:01:02:f2:9e:66
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
pci0: <multimedia, audio> at device 13.0 (no driver attached)
pci0: <input device> at device 13.1 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 447935528 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
Linux ELF exec handler installed
ata1: spurious interrupt - status=0x00 error=0x01 reason=0x01
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ata0-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ad0: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad0 dp=0xc26a6c70
ad0: <FUJITSU MPC3064AT/6018> ATA-3 disk at ata0-master
ad0: 6187MB (12672450 sectors), 13410 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ad1: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad1 dp=0xc26a6b70
ad1: <IBM-DTLA-307030/TX4OA60A> ATA-5 disk at ata0-slave
ad1: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA33
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED>
[0] f:80 typ:7 s(CHSata1-master: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED>
):0/1/1 e(CHS):787/254/63 s:63 l:12659157
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 6481488384 end 6481520639
GEOM: new disk ad1
acd0: setting UDMA33 on Intel PIIX4 chip
acd0: <WAITEC STORM24/0.010000> CDRW drive at ata1 as slave
acd0: read 2755KB/s (6890KB/s) write 4134KB/s (4134KB/s), 8192KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 128 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: CD-R 120mm data disc
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:60036417
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 30738645504 end 30738677759
GEOM: Configure ad1s1a, start 536870912 length 30201774592 end 30738645503
GEOM: Configure ad1s1b, start 0 length 536870912 end 536870911
GEOM: Configure ad1s1c, start 0 length 30738645504 end 30738645503
Mounting root from ufs:/dev/ad1s1a
start_init: trying /sbin/init