Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-STABLE-201011 #0: Sun Nov 21 16:41:48 CET 2010
    root@freebsd_vm:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     P7550  @ 2.26GHz (2255.36-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 1765003264 (1683 MB)
ACPI APIC Table: <APPLE  Apple00>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <APPLE Apple00> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x3f, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_lid0: enable wake failed
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2000-0x20ff at device 3.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory, RAM> at device 3.1 (no driver attached)
pci0: <serial bus, SMBus> at device 3.2 (no driver attached)
pci0: <memory, RAM> at device 3.3 (no driver attached)
pci0: <memory, RAM> at device 3.4 (no driver attached)
pci0: <processor> at device 3.5 (no driver attached)
ohci0: <nVidia nForce MCP79 USB Controller> mem 0x93488000-0x93488fff irq 18 at device 4.0 on pci0
ohci0: [ITHREAD]
usbus0: <nVidia nForce MCP79 USB Controller> on ohci0
ehci0: <NVIDIA nForce MCP79 USB 2.0 controller> mem 0x93489200-0x934892ff irq 19 at device 4.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <NVIDIA nForce MCP79 USB 2.0 controller> on ehci0
ohci1: <nVidia nForce MCP79 USB Controller> mem 0x93487000-0x93487fff irq 20 at device 6.0 on pci0
ohci1: [ITHREAD]
usbus2: <nVidia nForce MCP79 USB Controller> on ohci1
ehci1: <NVIDIA nForce MCP79 USB 2.0 controller> mem 0x93489100-0x934891ff irq 21 at device 6.1 on pci0
ehci1: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <NVIDIA nForce MCP79 USB 2.0 controller> on ehci1
pci0: <multimedia, HDA> at device 8.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 9.0 on pci0
pci1: <PCI bus> on pcib1
nfe0: <NVIDIA nForce MCP79 Networking Adapter> port 0x21e0-0x21e7 mem 0x93486000-0x93486fff,0x93489000-0x934890ff,0x93489300-0x9348930f irq 23 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe0: Ethernet address: xx:xx:xx:xx:xx:xx
nfe0: [FILTER]
atapci0: <nVidia nForce MCP79 SATA300 controller> port 0x21d8-0x21df,0x21ec-0x21ef,0x21d0-0x21d7,0x21e8-0x21eb,0x21c0-0x21cf mem 0x93484000-0x93485fff irq 16 at device 11.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0x92000000-0x92ffffff,0x80000000-0x8fffffff,0x90000000-0x91ffffff irq 17 at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci4: <ACPI PCI bus> on pcib4
fwohci0: <1394 Open Host Controller Interface> mem 0x93100000-0x93100fff irq 19 at device 0.0 on pci4
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:xx:xx
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x12e4000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: xx:xx:xx:xx:xx:xx:xx:xx
fwe0: Ethernet address: xx:xx:xx:xx:xx:xx:xx:xx
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: xx:xx:xx:xx:xx:xx:xx:xx @ 0xfffe00000000, S800, maxrec 4096
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
battery0: <ACPI Control Method Battery> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd: unable to get the current command byte value.
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to get the current command byte value.
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
RTC BIOS diagnostic error e7<clock_battery,ROM_cksum,config_unit,invalid_time>
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80e82610
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ad4: 476940MB <Seagate ST9500325AS 00000000> at ata2-master UDMA100 SATA 3Gb/s
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <nVidia> at usbus2
uhub2: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <nVidia> at usbus3
uhub3: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub2: 5 ports with 5 removable, self powered
uhub0: 7 ports with 7 removable, self powered
acd0: DVDR <OPTIARC DVD RW AD-5960S/2AP5> at ata3-master UDMA100 SATA 1.5Gb/s
SMP: AP CPU #1 Launched!
uhub3: 5 ports with 5 removable, self powered
Root mount waiting for: usbus3 usbus1
uhub1: 7 ports with 7 removable, self powered
Root mount waiting for: usbus3 usbus1
ugen2.2: <Apple Inc.> at usbus2
uhub4: <Apple Inc. BRCM2046 Hub, class 9/0, rev 2.00/1.00, addr 2> on usbus2
ugen3.2: <Apple> at usbus3
umass0: <Apple Card Reader, class 0/0, rev 2.00/98.33, addr 2> on usbus3
umass0:  SCSI over Bulk-Only; quirks = 0x0000
ugen1.2: <vendor 0x05e3> at usbus1
uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 2> on usbus1
uhub4: 3 ports with 0 removable, self powered
Root mount waiting for: usbus3 usbus1
uhub5: 4 ports with 4 removable, self powered
umass0:0:0:-1: Attached to scbus0
ugen2.3: <Apple Inc.> at usbus2
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
ugen1.3: <vendor 0x046a> at usbus1
ukbd0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/0.32, addr 3> on usbus1
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <APPLE SD Card Reader 1.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
kbd2 at ukbd0
uhid0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/0.32, addr 3> on usbus1
ugen2.4: <vendor 0x05ac> at usbus2
ukbd1: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 4> on usbus2
kbd3 at ukbd1
Root mount waiting for: usbus1
ugen1.4: <Logitech> at usbus1
ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/46.00, addr 4> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=0
uhid1: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/46.00, addr 4> on usbus1
ugen2.5: <vendor 0x05ac> at usbus2
ums1: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 5> on usbus2
ums1: 3 buttons and [XY] coordinates ID=2
Root mount waiting for: usbus1
ugen1.5: <Apple Inc.> at usbus1
Root mount waiting for: usbus1
Trying to mount root from ufs:/dev/md0
ugen0.2: <Apple Computer, Inc.> at usbus0
uhid2: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 2> on usbus0
ugen0.3: <Apple Inc.> at usbus0
ukbd2: <Apple Internal Keyboard> on usbus0
kbd4 at ukbd2
uhid3: <Touchpad> on usbus0
ums2: <Touchpad> on usbus0
ums2: 3 buttons and [XY] coordinates ID=2
ugen1.6: <Verbatim> at usbus1
umass1: <Verbatim STORE N GO, class 0/0, rev 2.00/1.10, addr 6> on usbus1
umass1:  SCSI over Bulk-Only; quirks = 0x0000
umass1:1:1:-1: Attached to scbus1
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI status: Check Condition
(probe0:umass-sim1:1:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed)
da1 at umass-sim1 bus 1 scbus1 target 0 lun 0
da1: <Verbatim STORE N GO 5.00> Removable Direct Access SCSI-0 device 
da1: 40.000MB/s transfers
da1: 7749MB (15870208 512 byte sectors: 255H 63S/T 987C)
GEOM: da1: partition 1 does not end on a track boundary.
GEOM: da1: partition 1 does not end on a track boundary.