GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e4000 len=000000000001c000
SMAP type=01 base=0000000000100000 len=00000000ddc80000
SMAP type=03 base=00000000ddd80000 len=000000000000e000
SMAP type=04 base=00000000ddd8e000 len=0000000000042000
SMAP type=02 base=00000000dddd0000 len=0000000000010000
SMAP type=02 base=00000000ddde0000 len=0000000000020000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000fff00000 len=0000000000100000
SMAP type=01 base=0000000100000000 len=0000000020000000
Table 'FACP' at 0xddd80290
Table 'APIC' at 0xddd80390
APIC: Found table at 0xddd80390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 3: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 4: enabled
SMP: Added CPU 3 (AP)
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0: Sun May 15 19:04:45 CEST 2011
    root@charlemagne.boland.org:/usr/obj/usr/src/sys/CHARLEMAGNE amd64
Table 'FACP' at 0xddd80290
Table 'APIC' at 0xddd80390
Table 'MCFG' at 0xddd80400
Table 'OEMB' at 0xddd8e040
Table 'HPET' at 0xddd87630
Table 'GSCI' at 0xddd8e0d0
ACPI: No SRAT table found
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff813cd000.
Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff813cd1f8.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff813cd820.
Calibrating TSC clock ... TSC clock: 2500055430 Hz
CPU: Intel(R) Core(TM)2 Quad CPU    Q8300  @ 2.50GHz (2500.06-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x00000000013fd000 - 0x00000000d5607fff, 3558912000 bytes (868875 pages)
0x0000000100000000 - 0x000000011ffeffff, 536805376 bytes (131056 pages)
avail memory = 4068827136 (3880 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <A_M_I_ OEMAPIC >
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
x86bios:  IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff8000223000
x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000
x86bios:  ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0xfbd50 00024 (v02 ACPIAM)
ACPI: XSDT 0xddd80100 00054 (v01 A_M_I_ OEMXSDT  11000912 MSFT 00000097)
ACPI: FACP 0xddd80290 000F4 (v03 A_M_I_ OEMFACP  11000912 MSFT 00000097)
ACPI: DSDT 0xddd80440 071EA (v01  A1434 A1434000 00000000 INTL 20060113)
ACPI: FACS 0xddd8e000 00040
ACPI: APIC 0xddd80390 0006C (v01 A_M_I_ OEMAPIC  11000912 MSFT 00000097)
ACPI: MCFG 0xddd80400 0003C (v01 A_M_I_ OEMMCFG  11000912 MSFT 00000097)
ACPI: OEMB 0xddd8e040 00089 (v01 A_M_I_ AMI_OEM  11000912 MSFT 00000097)
ACPI: HPET 0xddd87630 00038 (v01 A_M_I_ OEMHPET  11000912 MSFT 00000097)
ACPI: GSCI 0xddd8e0d0 02024 (v01 A_M_I_ GMCHSCI  11000912 MSFT 00000097)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <A_M_I_ OEMXSDT> on motherboard
PCIe: Memory Mapped configuration base @ 0xf0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: reservation of fed1c000, 4000 (3) failed
acpi0: reservation of fed20000, 70000 (3) failed
acpi0: reservation of ffc00000, 300000 (3) failed
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of f0000000, 4000000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, ddd00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  3 4 5 6 7 10 12 14 15
  Validation          0    3   N     0  3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 7 10 12 14 15
  Validation          0    5   N     0  3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 7 10 12 14 15
  Validation          0    5   N     0  3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  3 4 5 6 7 10 12 14 15
  Validation          0    7   N     0  3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  11
  Validation          0   11   N     0  11
  After Disable       0  255   N     0  11
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    6   N     0  3 4 5 6 7 10 12 14 15
  Validation          0    6   N     0  3 4 5 6 7 10 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2e30, revid=0x03
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2e32, revid=0x03
	domain=0, bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xfe400000, size 22, enabled
	map[18]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
	map[20]: type I/O Port, range 32, base 0xcc00, size  3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x27d8, revid=0x01
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfe3f8000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 21
found->	vendor=0x8086, dev=0x27d0, revid=0x01
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x27d2, revid=0x01
	domain=0, bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x27d4, revid=0x01
	domain=0, bus=0, slot=28, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x27c8, revid=0x01
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=6
	map[20]: type I/O Port, range 32, base 0xc400, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x27c9, revid=0x01
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[20]: type I/O Port, range 32, base 0xc480, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x27ca, revid=0x01
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[20]: type I/O Port, range 32, base 0xc800, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x27cb, revid=0x01
	domain=0, bus=0, slot=29, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=3
	map[20]: type I/O Port, range 32, base 0xc880, size  5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found->	vendor=0x8086, dev=0x27cc, revid=0x01
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=6
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfe3f7c00, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x244e, revid=0xe1
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x27b8, revid=0x01
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x27df, revid=0x01
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type I/O Port, range 32, base 0xffa0, size  4, enabled
found->	vendor=0x8086, dev=0x27c0, revid=0x01
	domain=0, bus=0, slot=31, func=2
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xc080, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xc000, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xbc00, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xb880, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xb800, size  4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 22
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel G41 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
hdac0: <Intel 82801G High Definition Audio Controller> mem 0xfe3f8000-0xfe3fbfff irq 21 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 49
hdac0: using IRQ 256 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     3
pcib1:   subordinate bus   3
pcib1:   no prefetched decode
pci3: <ACPI PCI bus> on pcib1
pci3: domain=0, physical bus=3
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xdfff
pcib2:   memory decode     0xfe800000-0xfe8fffff
pcib2:   prefetched decode 0xfdf00000-0xfdffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x10ec, dev=0x8136, revid=0x02
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 2 messages in map 0x20
	map[10]: type I/O Port, range 32, base 0xd800, size  8, enabled
pcib2: allocated I/O port range (0xd800-0xd8ff) for rid 10 of pci0:2:0:0
	map[18]: type Prefetchable Memory, range 64, base 0xfdfff000, size 12, enabled
pcib2: allocated prefetch range (0xfdfff000-0xfdffffff) for rid 18 of pci0:2:0:0
	map[20]: type Prefetchable Memory, range 64, base 0xfdfe0000, size 16, enabled
pcib2: allocated prefetch range (0xfdfe0000-0xfdfeffff) for rid 20 of pci0:2:0:0
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 17
re0: <RealTek 810xE PCIe 10/100baseTX> port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 0.0 on pci2
re0: MSI count : 1
re0: MSI-X count : 2
re0: attempting to allocate 1 MSI-X vectors (2 supported)
msi: routing MSI-X IRQ 257 to local APIC 0 vector 50
re0: using IRQ 257 for MSI-X
re0: Using 1 MSI-X message
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0: OUI 0x000004, model 0x0020, rev. 1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: bpf attached
re0: Ethernet address: 90:e6:ba:8a:36:a2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3:   domain            0
pcib3:   secondary bus     1
pcib3:   subordinate bus   1
pcib3:   no prefetched decode
pci1: <ACPI PCI bus> on pcib3
pci1: domain=0, physical bus=1
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc400-0xc41f irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 51
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
usbus0: bpf attached
uhci0: usbpf: Attached
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc480-0xc49f irq 19 at device 29.1 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
usbus1: bpf attached
uhci1: usbpf: Attached
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
usbus2: bpf attached
uhci2: usbpf: Attached
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc880-0xc89f irq 16 at device 29.3 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54
uhci3: LegSup = 0x2f00
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
usbus3: bpf attached
uhci3: usbpf: Attached
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe3f7c00-0xfe3f7fff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usbus4: bpf attached
ehci0: usbpf: Attached
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xe000-0xefff
pcib4:   memory decode     0xfe900000-0xfebfffff
pcib4:   no prefetched decode
pcib4:   Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found->	vendor=0x8086, dev=0x1229, revid=0x08
	domain=0, bus=4, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfebff000, size 12, enabled
pcib4: allocated memory range (0xfebff000-0xfebfffff) for rid 10 of pci0:4:0:0
	map[14]: type I/O Port, range 32, base 0xec00, size  6, enabled
pcib4: allocated I/O port range (0xec00-0xec3f) for rid 14 of pci0:4:0:0
	map[18]: type Memory, range 32, base 0xfea00000, size 20, enabled
pcib4: allocated memory range (0xfea00000-0xfeafffff) for rid 18 of pci0:4:0:0
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 20
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xec00-0xec3f mem 0xfebff000-0xfebfffff,0xfea00000-0xfeafffff irq 20 at device 0.0 on pci4
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus1
inphy0: OUI 0x005500, model 0x0015, rev. 4
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: bpf attached
fxp0: Ethernet address: 00:d0:b7:70:12:7f
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 55
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56
atapci1: <Intel ICH7 SATA300 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 22 at device 31.2 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 57
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
acpi_button0: <Power Button> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 59
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
hpet0:  t0: irqs 0x00f00000 (0), 64bit, periodic
hpet0:  t1: irqs 0x00f00000 (0)
hpet0:  t2: irqs 0x00f00800 (0)
Timecounter "HPET" frequency 14318180 Hz quality 900
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 60
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 61
uart0: fast interrupt
uart0: console (9600,n,8,1)
acpi0: wakeup code va 0xffffff8117dff000 pa 0x4000
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xcc800-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 62
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616472506004725
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616472506004725
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616472506004725
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616472506004725
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Device configuration finished.
procfs registered
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Realtek ALC662
hdac0:  HDA Codec ID: 0x10ec0662
hdac0:        Vendor: 0x10ec
hdac0:        Device: 0x0662
hdac0:      Revision: 0x01
hdac0:      Stepping: 0x01
hdac0: PCI Subvendor: 0x83901043
hdac0: 	Found audio FG nid=1 startnode=2 endnode=39 total=37
hdac0: 
hdac0: Processing audio FG cad=0 nid=1...
hdac0: GPIO: 0x40000002 NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdac0:  nid 20 0x01014010 as  1 seq  0      Line-out  Jack jack  1 loc  1 color   Green misc 0
hdac0:  nid 21 0x411111f0 as 15 seq  0       Speaker  None jack  1 loc  1 color   Black misc 1
hdac0:  nid 22 0x411111f0 as 15 seq  0       Speaker  None jack  1 loc  1 color   Black misc 1
hdac0:  nid 24 0x01a19830 as  3 seq  0           Mic  Jack jack  1 loc  1 color    Pink misc 8
hdac0:  nid 25 0x02a19840 as  4 seq  0           Mic  Jack jack  1 loc  2 color    Pink misc 8
hdac0:  nid 26 0x0181303f as  3 seq 15       Line-in  Jack jack  1 loc  1 color    Blue misc 0
hdac0:  nid 27 0x02214020 as  2 seq  0    Headphones  Jack jack  1 loc  2 color   Green misc 0
hdac0:  nid 28 0x411111f0 as 15 seq  0       Speaker  None jack  1 loc  1 color   Black misc 1
hdac0:  nid 29 0x4004c601 as  0 seq  1      Line-out  None jack  4 loc  0 color   Res.C misc 6
hdac0:  nid 30 0x411111f0 as 15 seq  0       Speaker  None jack  1 loc  1 color   Black misc 1
hdac0: Patched pins configuration:
hdac0:  nid 20 0x01014010 as  1 seq  0      Line-out  Jack jack  1 loc  1 color   Green misc 0
hdac0:  nid 21 0x411111f0 as 15 seq  0       Speaker  None jack  1 loc  1 color   Black misc 1 [DISABLED]
hdac0:  nid 22 0x411111f0 as 15 seq  0       Speaker  None jack  1 loc  1 color   Black misc 1 [DISABLED]
hdac0:  nid 24 0x01a19830 as  3 seq  0           Mic  Jack jack  1 loc  1 color    Pink misc 8
hdac0:  nid 25 0x02a19840 as  4 seq  0           Mic  Jack jack  1 loc  2 color    Pink misc 8
hdac0:  nid 26 0x0181303f as  3 seq 15       Line-in  Jack jack  1 loc  1 color    Blue misc 0
hdac0:  nid 27 0x02214020 as  2 seq  0    Headphones  Jack jack  1 loc  2 color   Green misc 0
hdac0:  nid 28 0x411111f0 as 15 seq  0       Speaker  None jack  1 loc  1 color   Black misc 1 [DISABLED]
hdac0:  nid 29 0x4004c601 as  0 seq  1      Line-out  None jack  4 loc  0 color   Res.C misc 6 [DISABLED]
hdac0:  nid 30 0x411111f0 as 15 seq  0       Speaker  None jack  1 loc  1 color   Black misc 1 [DISABLED]
hdac0: 4 associations found:
hdac0: Association 0 (1) out:
hdac0:  Pin nid=20 seq=0
hdac0: Association 1 (2) out:
hdac0:  Pin nid=27 seq=0
hdac0: Association 2 (3) in:
hdac0:  Pin nid=24 seq=0
hdac0:  Pin nid=26 seq=15
hdac0: Association 3 (4) in:
hdac0:  Pin nid=25 seq=0
hdac0: Tracing association 0 (1)
hdac0:  Pin 20 traced to DAC 2
hdac0: Association 0 (1) trace succeeded
hdac0: Tracing association 1 (2)
hdac0:  Pin 27 traced to DAC 4
hdac0: Association 1 (2) trace succeeded
hdac0: Tracing association 2 (3)
hdac0:  Pin 24 traced to ADC 8
hdac0:  Pin 26 traced to ADC 8
hdac0: Association 2 (3) trace succeeded
hdac0: Tracing association 3 (4)
hdac0:  Pin 25 traced to ADC 9
hdac0: Association 3 (4) trace succeeded
hdac0: Tracing input monitor
hdac0:  Tracing nid 11 to out
hdac0:  nid 11 is input monitor
hdac0:  Tracing nid 34 to out
hdac0:  Tracing nid 35 to out
hdac0: Tracing other input monitors
hdac0:  Tracing nid 24 to out
hdac0:  Tracing nid 25 to out
hdac0:  Tracing nid 26 to out
hdac0: Tracing beeper
hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdac0: 
hdac0: +-------------------+
hdac0: | DUMPING HDA NODES |
hdac0: +-------------------+
hdac0: 
hdac0: Default Parameter
hdac0: -----------------
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e0160
hdac0:                  16 20 24 bits, 44 48 96 KHz
hdac0:          IN amp: 0x00000000
hdac0:         OUT amp: 0x00000000
hdac0: 
hdac0:             nid: 2
hdac0:            Name: audio output
hdac0:      Widget cap: 0x0000001d
hdac0:                  STEREO
hdac0:     Association: 0 (0x00000001)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e0160
hdac0:                  16 20 24 bits, 44 48 96 KHz
hdac0:      Output amp: 0x00034040
hdac0:                  mute=0 step=64 size=3 offset=64
hdac0: 
hdac0:             nid: 3 [DISABLED]
hdac0:            Name: audio output
hdac0:      Widget cap: 0x0000001d
hdac0:                  STEREO
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e0160
hdac0:                  16 20 24 bits, 44 48 96 KHz
hdac0:      Output amp: 0x00034040
hdac0:                  mute=0 step=64 size=3 offset=64
hdac0: 
hdac0:             nid: 4
hdac0:            Name: audio output
hdac0:      Widget cap: 0x0000001d
hdac0:                  STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e0160
hdac0:                  16 20 24 bits, 44 48 96 KHz
hdac0:      Output amp: 0x00034040
hdac0:                  mute=0 step=64 size=3 offset=64
hdac0: 
hdac0:             nid: 5 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 6 [DISABLED]
hdac0:            Name: audio output
hdac0:      Widget cap: 0x00000211
hdac0:                  DIGITAL STEREO
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e0160
hdac0:                  16 20 24 bits, 44 48 96 KHz
hdac0: 
hdac0:             nid: 7 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 8
hdac0:            Name: audio input
hdac0:      Widget cap: 0x0010011b
hdac0:                  STEREO
hdac0:     Association: 2 (0x00008001)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x00060160
hdac0:                  16 20 bits, 44 48 96 KHz
hdac0:       Input amp: 0x80051f09
hdac0:                  mute=1 step=31 size=5 offset=9
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=35 [audio mixer]
hdac0: 
hdac0:             nid: 9
hdac0:            Name: audio input
hdac0:      Widget cap: 0x0010011b
hdac0:                  STEREO
hdac0:     Association: 3 (0x00000001)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x00060160
hdac0:                  16 20 bits, 44 48 96 KHz
hdac0:       Input amp: 0x80051f09
hdac0:                  mute=1 step=31 size=5 offset=9
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=34 [audio mixer]
hdac0: 
hdac0:             nid: 10 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 11
hdac0:            Name: audio mixer
hdac0:      Widget cap: 0x0020010b
hdac0:                  STEREO
hdac0:     Association: 2 (0x00008001)
hdac0:             OSS: mix (mix)
hdac0:       Input amp: 0x80051f17
hdac0:                  mute=1 step=31 size=5 offset=23
hdac0:     connections: 9
hdac0:           |
hdac0:           + <- nid=24 [pin: Mic (Pink Jack)]
hdac0:           + [DISABLED] <- nid=25 [pin: Mic (Pink Jack)]
hdac0:           + <- nid=26 [pin: Line-in (Blue Jack)]
hdac0:           + [DISABLED] <- nid=27 [pin: Headphones (Green Jack)]
hdac0:           + [DISABLED] <- nid=28 [pin: Speaker (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=29 [pin: Line-out (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=20 [pin: Line-out (Green Jack)]
hdac0:           + [DISABLED] <- nid=21 [pin: Speaker (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=22 [pin: Speaker (None)] [DISABLED]
hdac0: 
hdac0:             nid: 12
hdac0:            Name: audio mixer
hdac0:      Widget cap: 0x0020010b
hdac0:                  STEREO
hdac0:     Association: 0 (0x00000001)
hdac0:             OSS: pcm, mix
hdac0:       Input amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 2
hdac0:           |
hdac0:           + <- nid=2 [audio output]
hdac0:           + <- nid=11 [audio mixer]
hdac0: 
hdac0:             nid: 13 [DISABLED]
hdac0:            Name: audio mixer
hdac0:      Widget cap: 0x0020010b
hdac0:                  STEREO
hdac0:       Input amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 2
hdac0:           |
hdac0:           + [DISABLED] <- nid=3 [audio output] [DISABLED]
hdac0:           + [DISABLED] <- nid=11 [audio mixer]
hdac0: 
hdac0:             nid: 14
hdac0:            Name: audio mixer
hdac0:      Widget cap: 0x0020010b
hdac0:                  STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:             OSS: pcm, mix
hdac0:       Input amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 2
hdac0:           |
hdac0:           + <- nid=4 [audio output]
hdac0:           + <- nid=11 [audio mixer]
hdac0: 
hdac0:             nid: 15 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 16 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 17 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 18 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 19 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 20
hdac0:            Name: pin: Line-out (Green Jack)
hdac0:      Widget cap: 0x0040018d
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00000001)
hdac0:         Pin cap: 0x0001003c
hdac0:                  PDC HP OUT IN EAPD
hdac0:      Pin config: 0x01014010
hdac0:     Pin control: 0x00000040 OUT
hdac0:            EAPD: 0x00000002
hdac0:      Output amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=12 [audio mixer]
hdac0: 
hdac0:             nid: 21 [DISABLED]
hdac0:            Name: pin: Speaker (None)
hdac0:      Widget cap: 0x0040018d
hdac0:                  UNSOL STEREO
hdac0:         Pin cap: 0x00010034
hdac0:                  PDC OUT IN EAPD
hdac0:      Pin config: 0x411111f0
hdac0:     Pin control: 0x00000000
hdac0:            EAPD: 0x00000002
hdac0:      Output amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 1
hdac0:           |
hdac0:           + [DISABLED] <- nid=13 [audio mixer] [DISABLED]
hdac0: 
hdac0:             nid: 22 [DISABLED]
hdac0:            Name: pin: Speaker (None)
hdac0:      Widget cap: 0x0040018d
hdac0:                  UNSOL STEREO
hdac0:         Pin cap: 0x00000034
hdac0:                  PDC OUT IN
hdac0:      Pin config: 0x411111f0
hdac0:     Pin control: 0x00000000
hdac0:      Output amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 1
hdac0:           |
hdac0:           + [DISABLED] <- nid=14 [audio mixer]
hdac0: 
hdac0:             nid: 23 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 24
hdac0:            Name: pin: Mic (Pink Jack)
hdac0:      Widget cap: 0x0040018f
hdac0:                  UNSOL STEREO
hdac0:     Association: 2 (0x00000001)
hdac0:             OSS: mic (mic)
hdac0:         Pin cap: 0x00001734
hdac0:                  PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x01a19830
hdac0:     Pin control: 0x00000024 IN VREFs
hdac0:      Output amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 1
hdac0:           |
hdac0:           + [DISABLED] <- nid=14 [audio mixer]
hdac0: 
hdac0:             nid: 25
hdac0:            Name: pin: Mic (Pink Jack)
hdac0:      Widget cap: 0x0040018f
hdac0:                  UNSOL STEREO
hdac0:     Association: 3 (0x00000001)
hdac0:             OSS: monitor (monitor)
hdac0:         Pin cap: 0x0000173c
hdac0:                  PDC HP OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x02a19840
hdac0:     Pin control: 0x00000024 IN VREFs
hdac0:      Output amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 2
hdac0:           |
hdac0:           + [DISABLED] <- nid=12 [audio mixer] (selected)
hdac0:           + [DISABLED] <- nid=14 [audio mixer]
hdac0: 
hdac0:             nid: 26
hdac0:            Name: pin: Line-in (Blue Jack)
hdac0:      Widget cap: 0x0040018d
hdac0:                  UNSOL STEREO
hdac0:     Association: 2 (0x00008000)
hdac0:             OSS: line (line)
hdac0:         Pin cap: 0x00000034
hdac0:                  PDC OUT IN
hdac0:      Pin config: 0x0181303f
hdac0:     Pin control: 0x00000020 IN
hdac0:      Output amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 1
hdac0:           |
hdac0:           + [DISABLED] <- nid=13 [audio mixer] [DISABLED]
hdac0: 
hdac0:             nid: 27
hdac0:            Name: pin: Headphones (Green Jack)
hdac0:      Widget cap: 0x0040018f
hdac0:                  UNSOL STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:         Pin cap: 0x0000173c
hdac0:                  PDC HP OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x02214020
hdac0:     Pin control: 0x000000c0 HP OUT
hdac0:      Output amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:       Input amp: 0x00270300
hdac0:                  mute=0 step=3 size=39 offset=0
hdac0:     connections: 2
hdac0:           |
hdac0:           + [DISABLED] <- nid=12 [audio mixer]
hdac0:           + <- nid=14 [audio mixer] (selected)
hdac0: 
hdac0:             nid: 28 [DISABLED]
hdac0:            Name: pin: Speaker (None)
hdac0:      Widget cap: 0x00400001
hdac0:                  STEREO
hdac0:         Pin cap: 0x00000020
hdac0:                  IN
hdac0:      Pin config: 0x411111f0
hdac0:     Pin control: 0x00000000
hdac0: 
hdac0:             nid: 29 [DISABLED]
hdac0:            Name: pin: Line-out (None)
hdac0:      Widget cap: 0x00400000
hdac0:         Pin cap: 0x00000020
hdac0:                  IN
hdac0:      Pin config: 0x4004c601
hdac0:     Pin control: 0x00000000
hdac0: 
hdac0:             nid: 30 [DISABLED]
hdac0:            Name: pin: Speaker (None)
hdac0:      Widget cap: 0x00400300
hdac0:                  DIGITAL
hdac0:         Pin cap: 0x00000010
hdac0:                  OUT
hdac0:      Pin config: 0x411111f0
hdac0:     Pin control: 0x00000000
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=6 [audio output] [DISABLED]
hdac0: 
hdac0:             nid: 31 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 32 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00040
hdac0:                  PROC
hdac0: 
hdac0:             nid: 33 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 34
hdac0:            Name: audio mixer
hdac0:      Widget cap: 0x0020010b
hdac0:                  STEREO
hdac0:     Association: 3 (0x00000001)
hdac0:             OSS: monitor
hdac0:       Input amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 10
hdac0:           |
hdac0:           + [DISABLED] <- nid=24 [pin: Mic (Pink Jack)]
hdac0:           + <- nid=25 [pin: Mic (Pink Jack)]
hdac0:           + [DISABLED] <- nid=26 [pin: Line-in (Blue Jack)]
hdac0:           + [DISABLED] <- nid=27 [pin: Headphones (Green Jack)]
hdac0:           + [DISABLED] <- nid=28 [pin: Speaker (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=29 [pin: Line-out (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=20 [pin: Line-out (Green Jack)]
hdac0:           + [DISABLED] <- nid=21 [pin: Speaker (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=22 [pin: Speaker (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=11 [audio mixer]
hdac0: 
hdac0:             nid: 35
hdac0:            Name: audio mixer
hdac0:      Widget cap: 0x0020010b
hdac0:                  STEREO
hdac0:     Association: 2 (0x00008001)
hdac0:             OSS: line, mic, mix
hdac0:       Input amp: 0x80000000
hdac0:                  mute=1 step=0 size=0 offset=0
hdac0:     connections: 10
hdac0:           |
hdac0:           + <- nid=24 [pin: Mic (Pink Jack)]
hdac0:           + [DISABLED] <- nid=25 [pin: Mic (Pink Jack)]
hdac0:           + <- nid=26 [pin: Line-in (Blue Jack)]
hdac0:           + [DISABLED] <- nid=27 [pin: Headphones (Green Jack)]
hdac0:           + [DISABLED] <- nid=28 [pin: Speaker (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=29 [pin: Line-out (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=20 [pin: Line-out (Green Jack)]
hdac0:           + [DISABLED] <- nid=21 [pin: Speaker (None)] [DISABLED]
hdac0:           + [DISABLED] <- nid=22 [pin: Speaker (None)] [DISABLED]
hdac0:           + <- nid=11 [audio mixer]
hdac0: 
hdac0:             nid: 36 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 37 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
hdac0:             nid: 38 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f00000
hdac0: 
pcm0: <HDA Realtek ALC662 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0: 
pcm0: Playback:
pcm0: 
pcm0:      Stream cap: 0x00000001
pcm0:                  PCM
pcm0:         PCM cap: 0x000e0160
pcm0:                  16 20 24 bits, 44 48 96 KHz
pcm0:             DAC: 2
pcm0: 
pcm0: Record:
pcm0: 
pcm0:      Stream cap: 0x00000001
pcm0:                  PCM
pcm0:         PCM cap: 0x00060160
pcm0:                  16 20 bits, 44 48 96 KHz
pcm0:             ADC: 8
pcm0: 
pcm0: +-------------------------------+
pcm0: | DUMPING Playback/Record Paths |
pcm0: +-------------------------------+
pcm0: 
pcm0: Playback:
pcm0: 
pcm0:     nid=20 [pin: Line-out (Green Jack)]
pcm0:       |
pcm0:       + <- nid=12 [audio mixer] [src: pcm, mix]
pcm0:              |
pcm0:              + <- nid=2 [audio output] [src: pcm]
pcm0:              + <- nid=11 [audio mixer] [src: mix]
pcm0: 
pcm0: Record:
pcm0: 
pcm0:     nid=8 [audio input]
pcm0:       |
pcm0:       + <- nid=35 [audio mixer] [src: line, mic, mix]
pcm0:              |
pcm0:              + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm0:              + <- nid=26 [pin: Line-in (Blue Jack)] [src: line]
pcm0:              + <- nid=11 [audio mixer] [src: mix]
pcm0: 
pcm0: Input Mix:
pcm0: 
pcm0:     nid=11 [audio mixer]
pcm0:       |
pcm0:       + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm0:       + <- nid=26 [pin: Line-in (Blue Jack)] [src: line]
pcm0: 
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0: 
pcm0: Master Volume (OSS: vol)
pcm0:    |
pcm0:    +- ctl  1 (nid   2 out):    -64/0dB (65 steps)
pcm0:    +- ctl 15 (nid  12 in   0): mute
pcm0:    +- ctl 16 (nid  12 in   1): mute
pcm0:    +- ctl 21 (nid  20 in ):    mute
pcm0: 
pcm0: PCM Volume (OSS: pcm)
pcm0:    |
pcm0:    +- ctl  1 (nid   2 out):    -64/0dB (65 steps)
pcm0:    +- ctl 15 (nid  12 in   0): mute
pcm0: 
pcm0: Microphone Volume (OSS: mic)
pcm0:    |
pcm0:    +- ctl 25 (nid  24 out):    0/30dB (4 steps)
pcm0:    +- ctl 41 (nid  35 in   0): mute
pcm0: 
pcm0: Line-in Volume (OSS: line)
pcm0:    |
pcm0:    +- ctl  8 (nid  11 in   2): -34/12dB (32 steps) + mute
pcm0:    +- ctl 43 (nid  35 in   2): mute
pcm0: 
pcm0: Recording Level (OSS: rec)
pcm0:    |
pcm0:    +- ctl  4 (nid   8 in   0): -13/33dB (32 steps) + mute
pcm0:    +- ctl 41 (nid  35 in   0): mute
pcm0:    +- ctl 43 (nid  35 in   2): mute
pcm0:    +- ctl 50 (nid  35 in   9): mute
pcm0: 
pcm0: Input Mix Level (OSS: mix)
pcm0:    |
pcm0:    +- ctl  6 (nid  11 in   0): -34/12dB (32 steps) + mute
pcm0:    +- ctl  8 (nid  11 in   2): -34/12dB (32 steps) + mute
pcm0:    +- ctl 16 (nid  12 in   1): mute
pcm0:    +- ctl 50 (nid  35 in   9): mute
pcm0: 
pcm0: Input Monitoring Level (OSS: igain)
pcm0:    |
pcm0:    +- ctl 16 (nid  12 in   1): mute
pcm0: 
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "mix":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 41b0000, 4000; 0xffffff8117e17000 -> 41b0000
pcm0: sndbuf_setmap 3e60000, 4000; 0xffffff8117e27000 -> 3e60000
pcm1: <HDA Realtek ALC662 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm1: +--------------------------------------+
pcm1: | DUMPING PCM Playback/Record Channels |
pcm1: +--------------------------------------+
pcm1: 
pcm1: Playback:
pcm1: 
pcm1:      Stream cap: 0x00000001
pcm1:                  PCM
pcm1:         PCM cap: 0x000e0160
pcm1:                  16 20 24 bits, 44 48 96 KHz
pcm1:             DAC: 4
pcm1: 
pcm1: Record:
pcm1: 
pcm1:      Stream cap: 0x00000001
pcm1:                  PCM
pcm1:         PCM cap: 0x00060160
pcm1:                  16 20 bits, 44 48 96 KHz
pcm1:             ADC: 9
pcm1: 
pcm1: +-------------------------------+
pcm1: | DUMPING Playback/Record Paths |
pcm1: +-------------------------------+
pcm1: 
pcm1: Playback:
pcm1: 
pcm1:     nid=27 [pin: Headphones (Green Jack)]
pcm1:       |
pcm1:       + <- nid=14 [audio mixer] [src: pcm, mix]
pcm1:              |
pcm1:              + <- nid=4 [audio output] [src: pcm]
pcm1:              + <- nid=11 [audio mixer] [src: mix]
pcm1: 
pcm1: Record:
pcm1: 
pcm1:     nid=9 [audio input]
pcm1:       |
pcm1:       + <- nid=34 [audio mixer] [src: monitor]
pcm1:              |
pcm1:              + <- nid=25 [pin: Mic (Pink Jack)] [src: monitor]
pcm1: 
pcm1: +-------------------------+
pcm1: | DUMPING Volume Controls |
pcm1: +-------------------------+
pcm1: 
pcm1: Master Volume (OSS: vol)
pcm1:    |
pcm1:    +- ctl  3 (nid   4 out):    -64/0dB (65 steps)
pcm1:    +- ctl 19 (nid  14 in   0): mute
pcm1:    +- ctl 20 (nid  14 in   1): mute
pcm1:    +- ctl 29 (nid  27 in ):    mute
pcm1: 
pcm1: PCM Volume (OSS: pcm)
pcm1:    |
pcm1:    +- ctl  3 (nid   4 out):    -64/0dB (65 steps)
pcm1:    +- ctl 19 (nid  14 in   0): mute
pcm1: 
pcm1: Microphone2 Volume (OSS: monitor)
pcm1:    |
pcm1:    +- ctl 27 (nid  25 out):    0/30dB (4 steps)
pcm1:    +- ctl 32 (nid  34 in   1): mute
pcm1: 
pcm1: Recording Level (OSS: rec)
pcm1:    |
pcm1:    +- ctl  5 (nid   9 in   0): -13/33dB (32 steps) + mute
pcm1:    +- ctl 32 (nid  34 in   1): mute
pcm1: 
pcm1: Input Mix Level (OSS: mix)
pcm1:    |
pcm1:    +- ctl 20 (nid  14 in   1): mute
pcm1: 
pcm1: Input Monitoring Level (OSS: igain)
pcm1:    |
pcm1:    +- ctl 20 (nid  14 in   1): mute
pcm1: 
pcm1: Mixer "vol":
pcm1: Mixer "pcm":
pcm1: Mixer "mix":
pcm1: Mixer "rec":
pcm1: Mixer "igain":
pcm1: Mixer "monitor":
pcm1: clone manager: deadline=750ms flags=0x8000001e
pcm1: sndbuf_setmap 3e70000, 4000; 0xffffff8117e37000 -> 3e70000
pcm1: sndbuf_setmap 41c0000, 4000; 0xffffff8117e47000 -> 41c0000
fxp0: link state changed to DOWN
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x0
ata2: SATA reset: ports status=0x05
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata2: reset tp2 stat0=50 stat1=00 devices=0x20001
(aprobe0:ata2:0:0:0): SIGNATURE: 0000
ata3: SATA reset: ports status=0x00
(aprobe0:ata2:0:1:0): SIGNATURE: eb14
pass0 at ata2 bus 0 scbus1 target 0 lun 0
pass0: <WDC WD10EARS-00Y5B1 80.00A80> ATA-8 SATA 2.x device
pass0: Serial Number WD-WCAV55611064
pass0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
pass1 at ata2 bus 0 scbus1 target 1 lun 0
pass1: <HL-DT-ST DVDRAM GH22NS50 TN02> Removable CD-ROM SCSI-0 device 
pass1: Serial Number K1Z9C4B0949
pass1: 150.000MB/s transfers (SATA, UDMA5, ATAPI 12bytes, PIO 8192bytes)
ada0 at ata2 bus 0 scbus1 target 0 lun 0
GEOM: new disk ada0
ada0: <WDC WD10EARS-00Y5B1 80.00A80> ATA-8 SATA 2.x device
ada0: Serial Number WD-WCAV55611064
ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
(cd0:cpu1 AP:
ata2:0:     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
1:  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
0):   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0SCSI status error
 pmc: 0x00010400
(cd0:ata2:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
SMP: AP CPU #3 Launched!
cpu3 AP:
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
     ID: 0x03000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
(cd0:ata2:0:1:0): SCSI status: Check Condition
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
(cd0:ata2:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0(cd0: pmc: 0x00010400ata2:0:
1:SMP: AP CPU #2 Launched!
0): cpu2 AP:
Error 6, Unretryable error
     ID: 0x02000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
cd0 at ata2 bus 0 scbus1 target 1 lun 0
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
cd0:   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0<HL-DT-ST DVDRAM GH22NS50 TN02> Removable CD-ROM SCSI-0 device 
 pmc: 0x00010400cd0: Serial Number K1Z9C4B0949

cd0: 150.000MB/s transfersioapic0: routing intpin 1 ( (ISA IRQ 1SATA, ) to lapic 1 vector 48
UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 2 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 2 vector 49
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 3 vector 49
ioapic0: routing intpin 22 (GEOM_PART: integrity check failed (ada0, MBR)
PCI IRQ 22) to lapic 1 vector 50
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 50
msi: Assigning MSI IRQ 256 to local APIC 3 vector 50
SMP: passed TSC synchronization test
Timecounter "TSC" frequency 2500055430 Hz quality 800
GEOM: new disk cd0
(cd0:ata2:0:1:0): SCSI status error
(cd0:ata2:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
(cd0:ata2:0:1:0): Error 6, Unretryable error
uhub4: (cd0:8 ports with 8 removable, self powered
ata2:0:1:0): SCSI status error
(cd0:ata2:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
(cd0:ata2:0:1:0): Error 6, Unretryable error
Root mount waiting for: usbus4
ugen4.2: <ENE Flash> at usbus4
umass0: <ENE Flash UB623X, class 0/0, rev 2.00/1.00, addr 2> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus4
ugen1.2: <vendor 0x0430> at usbus1
ukbd0: <vendor 0x0430 product 0x0005, class 0/0, rev 1.00/1.02, addr 2> on usbus1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
umass0:3:0:-1: Attached to scbus3
(probe0:umass-sim0:0:0:0): Root mount waiting for:Down reving Protocol Version from 2 to 0?
 usbus4
Trying to mount root from ufs:/dev/ada0s1a [rw]...
(probe0:mountroot: waiting for device /dev/ada0s1a ...
umass-sim0:0:0:0): SCSI status error
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
GEOM: new disk da0
pass2 at umass-sim0 bus 0 scbus3 target 0 lun 0
pass2: <USB2.0 CardReader CF 0100> Removable Direct Access SCSI-0 device 
pass2: Serial Number 606569746801
pass2: 40.000MB/s transfers
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <USB2.0 CardReader CF 0100> Removable Direct Access SCSI-0 device 
da0: Serial Number 606569746801
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): SCSI status error
(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
ugen3.2: <Microsoft> at usbus3
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da0:umass-sim0:0:0:0): Error 6, Unretryable error
ukbd1: Opened disk da0 -> 6
(probe0:<Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/2.52, addr 2> on usbus3
umass-sim0:0:kbd3 at ukbd1
0:kbd3: ukbd1, generic (0), config:0x0, flags:0x3d00001): 
Down reving Protocol Version from 2 to 0?
ums0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/2.52, addr 2> on usbus3
ums0: 5 buttons and [XYZT] coordinates ID=26
ums0: 0 buttons and [T] coordinates ID=0
uhid0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/2.52, addr 2> on usbus3
(probe0:umass-sim0:0:0:1): SCSI status error
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:1): Error 6, Unretryable error
pass3 at umass-sim0 bus 0 scbus3 target 0 lun 1
pass3: <USB2.0 CardReader SM XD 0100> Removable Direct Access SCSI-0 device 
pass3: Serial Number 606569746801
pass3: 40.000MB/s transfers
(da0:umass-sim0:0:0:0): SCSI status error
Mounting from ufs:/dev/ada0s1a failed with error 19(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 
.
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error

(da0:umass-sim0:0:0:0): SCSI status: Check Condition
Loader variables:
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
  vfs.root.mountfrom=ufs:/dev/ada0s1a
(da0:  vfs.root.mountfrom.options=rw
umass-sim0:0:
0:Manual root filesystem specification:
0):   <fstype>:<device> [options]
Error 6, Unretryable error
      Mount <device> using filesystem <fstype>
Opened disk da0 -> 6
      and with the specified (optional) option list.
(da1:
umass-sim0:0:    eg. ufs:/dev/da0s1a
0:        zfs:tank
1):         cd9660:/dev/acd0 ro
SCSI status error
          (which is equivalent to: (da1:umass-sim0:0:0:1): READ CAPACITY(10). CDB: 25 20 0 0 0 0 0 0 0 0 
mount -t cd9660 -o ro /dev/acd0 /)
(da1:umass-sim0:0:0:1): CAM status: SCSI Status Error

(da1:umass-sim0:0:0:1): SCSI status: Check Condition
  ?               List valid disk boot devices
(da1:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present)
  .               Yield 1 second (for background tasks)
(da1:  <empty line>    Abort manual input
umass-sim0:0:
0:mountroot> 1): Error 6, Unretryable error
da1 at umass-sim0 bus 0 scbus3 target 0 lun 1
da1: <USB2.0 CardReader SM XD 0100> Removable Direct Access SCSI-0 device 
da1: Serial Number 606569746801
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:2): Down reving Protocol Version from 2 to 0?
(probe0:umass-sim0:0:0:2): SCSI status error
(probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0 
(probe0:umass-sim0:0:0:2): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:2): SCSI status: Check Condition
(probe0:umass-sim0:0:0:2): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:2): Error 6, Unretryable error
pass4 at umass-sim0 bus 0 scbus3 target 0 lun 2
pass4: <USB2.0 CardReader MS 0100> Removable Direct Access SCSI-0 device 
pass4: Serial Number 606569746801
pass4: 40.000MB/s transfers
(da2:umass-sim0:0:0:2): SCSI status error
(da2:umass-sim0:0:0:2): READ CAPACITY(10). CDB: 25 40 0 0 0 0 0 0 0 0 
(da2:umass-sim0:0:0:2): CAM status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI status: Check Condition
(da2:umass-sim0:0:0:2): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da2:umass-sim0:0:0:2): Error 6, Unretryable error
da2 at umass-sim0 bus 0 scbus3 target 0 lun 2
da2: <USB2.0 CardReader MS 0100> Removable Direct Access SCSI-0 device 
da2: Serial Number 606569746801
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:3): Down reving Protocol Version from 2 to 0?
(probe0:umass-sim0:0:0:3): SCSI status error
(probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0 
(probe0:umass-sim0:0:0:3): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:3): SCSI status: Check Condition
(probe0:umass-sim0:0:0:3): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:3): Error 6, Unretryable error
pass5 at umass-sim0 bus 0 scbus3 target 0 lun 3
pass5: <USB2.0 CardReader SD 0100> Removable Direct Access SCSI-0 device 
pass5: Serial Number 606569746801
pass5: 40.000MB/s transfers
(da3:umass-sim0:0:0:3): SCSI status error
(da3:umass-sim0:0:0:3): READ CAPACITY(10). CDB: 25 60 0 0 0 0 0 0 0 0 
(da3:umass-sim0:0:0:3): CAM status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI status: Check Condition
(da3:umass-sim0:0:0:3): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da3:umass-sim0:0:0:3): Error 6, Unretryable error
da3 at umass-sim0 bus 0 scbus3 target 0 lun 3
da3: <USB2.0 CardReader SD 0100> Removable Direct Access SCSI-0 device 
da3: Serial Number 606569746801
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present

panic: mountroot: unable to (re-)mount root.
cpuid = 3
KDB: enter: panic
[ thread pid 1 tid 100002 ]
Stopped at      kdb_enter+0x3b: movq    $0,0x8c5bb2(%rip)