[2.0.1-RELEASE][root@racg.local]/root(2): dmesg Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE #2: Sun Jan 8 14:57:36 CET 2012 root@racg.local:/usr/obj/usr/src/sys/racg i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc11bd000. Preloaded elf module "/boot/kernel/mac_bsdextended.ko" at 0xc11bd1d8. Preloaded elf module "/boot/kernel/mac_seeotheruids.ko" at 0xc11bd28c. module_register: module mac_bsdextended already exists! Module mac_bsdextended failed to register: 17 module_register: module mac_seeotheruids already exists! Module mac_seeotheruids failed to register: 17 Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 999996424 Hz CPU: AMD Sempron(tm) Processor 200U (1000.00-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60ff2 Family = f Model = 6f Stepping = 2 Features=0x78bfbff Features2=0x2001 AMD Features=0xea500800 AMD Features2=0x119 Data TLB: 32 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x0000000075cc0fff, 1955180544 bytes (477339 pages) avail memory = 1953640448 (1863 MB) Table 'FACP' at 0x77ee0d5c Table 'APIC' at 0x77ee0dd0 APIC: Found table at 0x77ee0dd0 MP Configuration Table version 1.4 found at 0xc009e071 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) ACPI APIC Table: bios32: Found BIOS32 Service Directory header at 0xc00f97e0 bios32: Entry = 0xfdb60 (c00fdb60) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfdb60+0x219 pnpbios: Found PnP BIOS data at 0xc00f9880 pnpbios: Entry = f0000:c69c Rev = 1.0 Other BIOS signatures found: x86bios: IVT 0x000000-0x0004ff at 0xc0000000 x86bios: SSEG 0x010000-0x01ffff at 0xc537e000 x86bios: EBDA 0x09d000-0x09ffff at 0xc009d000 x86bios: ROM 0x0a0000-0x0effff at 0xc00a0000 APIC: CPU 0 has ACPI ID 0 Security policy loaded: TrustedBSD MAC/BSD Extended (mac_bsdextended) Security policy unload: TrustedBSD MAC/BSD Extended (mac_bsdextended) module_register_init: MOD_LOAD (mac_bsdextended, 0xc0bb7900, 0xc0f4bd80) error 17 Security policy loaded: TrustedBSD MAC/seeotheruids (mac_seeotheruids) Security policy unload: TrustedBSD MAC/seeotheruids (mac_seeotheruids) module_register_init: MOD_LOAD (mac_seeotheruids, 0xc0bb7900, 0xc11ba200) error 17 ULE: setup cpu 0 ACPI: RSDP 0xf9840 00014 (v0 PTLTD ) ACPI: RSDT 0x77ede000 00038 (v1 extra exone 00060000 LTP 00000000) ACPI: FACP 0x77ee0d5c 00074 (v1 FTS D2963/S1 00060000 000F4240) ACPI: DSDT 0x77ede038 02D24 (v1 FTS D2963/S1 00060000 MSFT 03000001) ACPI: FACS 0x77ee1fc0 00040 ACPI: APIC 0x77ee0dd0 00046 (v1 PTLTD ? APIC 00060000 LTP 00000000) ACPI: SLIC 0x77ee0e16 00176 (v1 extra exone 00060000 LTP 00000000) ACPI: MCFG 0x77ee0f8c 0003C (v1 PTLTD MCFG 00060000 LTP 00000000) ACPI: HPET 0x77ee0fc8 00038 (v1 PTLTD HPETTBL 00060000 LTP 00000001) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 firmware: 'mxge_rss_ethp_z8e' version 563868: 155786 bytes loaded at 0xc0eb9760 wlan: mac acl policy registered wlan: <802.11 Link Layer> firmware: 'mxge_eth_z8e' version 367564: 116477 bytes loaded at 0xc0e5a980 firmware: 'mxge_ethp_z8e' version 377876: 117102 bytes loaded at 0xc0e77100 firmware: 'mxge_rss_eth_z8e' version 553468: 154580 bytes loaded at 0xc0e93b00 random: nfslock: pseudo-device crypto: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled io: null: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 npx0: INT 16 interface cryptosoft0: on motherboard crypto: assign cryptosoft0 driver id 0, flags 100663296 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 padlock0: No ACE support. acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 pcibios: BIOS version 3.00 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc537b000 pa 0x1000 AcpiOsDerivePciId: \\_SB_.PCI0.PATA.IDE_ -> bus 0 dev 20 func 1 ACPI HPET table warning: Sequence is non-zero (2) ACPI timer: 0/3 0/3 1/2 1/2 1/2 1/2 1/2 0/3 1/2 1/2 -> 7 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: on acpi0 cpu0: switching to generic Cx mode pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 7 9 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 7 9 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 7 9 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 7 9 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 7 9 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 7 9 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 7 9 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 7 9 10 11 12 14 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1002, dev=0x7910, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[1c]: type Memory, range 64, base 0xe0000000, size 29, enabled found-> vendor=0x1002, dev=0x7912, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x1c (7000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x7916, revid=0x00 domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1002, dev=0x7917, revid=0x00 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1002, dev=0x4380, revid=0x00 domain=0, bus=0, slot=18, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x8440, size 3, enabled map[14]: type I/O Port, range 32, base 0x8434, size 2, enabled map[18]: type I/O Port, range 32, base 0x8438, size 3, enabled map[1c]: type I/O Port, range 32, base 0x8430, size 2, enabled map[20]: type I/O Port, range 32, base 0x8400, size 4, enabled map[24]: type Memory, range 32, base 0xf880a000, size 10, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 22 found-> vendor=0x1002, dev=0x4387, revid=0x00 domain=0, bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xf8804000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 16 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8804000 found-> vendor=0x1002, dev=0x4388, revid=0x00 domain=0, bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[10]: type Memory, range 32, base 0xf8805000, size 12, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 17 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8805000 found-> vendor=0x1002, dev=0x4389, revid=0x00 domain=0, bus=0, slot=19, func=2 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type Memory, range 32, base 0xf8806000, size 12, enabled pcib0: matched entry for 0.19.INTC pcib0: slot 19 INTC hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8806000 found-> vendor=0x1002, dev=0x438a, revid=0x00 domain=0, bus=0, slot=19, func=3 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[10]: type Memory, range 32, base 0xf8807000, size 12, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 17 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8807000 found-> vendor=0x1002, dev=0x438b, revid=0x00 domain=0, bus=0, slot=19, func=4 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type Memory, range 32, base 0xf8808000, size 12, enabled pcib0: matched entry for 0.19.INTC pcib0: slot 19 INTC hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8808000 found-> vendor=0x1002, dev=0x4386, revid=0x00 domain=0, bus=0, slot=19, func=5 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf880a400, size 8, enabled pcib0: matched entry for 0.19.INTD pcib0: slot 19 INTD hardwired to IRQ 19 unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf880a400 found-> vendor=0x1002, dev=0x4385, revid=0x14 domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type I/O Port, range 32, base 0x8410, size 4, enabled found-> vendor=0x1002, dev=0x438c, revid=0x00 domain=0, bus=0, slot=20, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0015, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base 0x8420, size 4, enabled found-> vendor=0x1002, dev=0x4383, revid=0x00 domain=0, bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xf8800000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x438d, revid=0x00 domain=0, bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4384, revid=0x00 domain=0, bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xf8200000-0xf83fffff pcib1: prefetched decode 0xf0000000-0xf7ffffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x791f, revid=0x00 domain=0, bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 64, base 0xf0000000, size 27, enabled pcib1: requested memory range 0xf0000000-0xf7ffffff: good map[18]: type Memory, range 64, base 0xf8300000, size 16, enabled pcib1: requested memory range 0xf8300000-0xf830ffff: good map[20]: type I/O Port, range 32, base 0x9000, size 8, enabled pcib1: requested I/O range 0x9000-0x90ff: in range map[24]: type Memory, range 32, base 0xf8200000, size 20, enabled pcib1: requested memory range 0xf8200000-0xf82fffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x7919, revid=0x00 domain=0, bus=1, slot=5, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf8310000, size 14, enabled pcib1: requested memory range 0xf8310000-0xf8313fff: good pcib1: matched entry for 1.5.INTB pcib1: slot 5 INTB hardwired to IRQ 19 vgapci0: port 0x9000-0x90ff mem 0xf0000000-0xf7ffffff,0xf8300000-0xf830ffff,0xf8200000-0xf82fffff irq 18 at device 5.0 on pci1 pci1: at device 5.2 (no driver attached) pcib2: at device 6.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 7 pcib2: I/O decode 0xa000-0xafff pcib2: memory decode 0xf8400000-0xf84fffff pcib2: prefetched decode 0xf8000000-0xf80fffff pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x10ec, dev=0x8168, revid=0x02 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0xa000, size 8, enabled pcib2: requested I/O range 0xa000-0xa0ff: in range map[18]: type Memory, range 64, base 0xf8400000, size 12, enabled pcib2: requested memory range 0xf8400000-0xf8400fff: good map[20]: type Prefetchable Memory, range 64, base 0xf8000000, size 16, enabled pcib2: requested memory range 0xf8000000-0xf800ffff: good pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 18 re0: port 0xa000-0xa0ff mem 0xf8400000-0xf8400fff,0xf8000000-0xf800ffff irq 18 at device 0.0 on pci2 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf8400000 re0: MSI count : 1 re0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 re0: using IRQ 256 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00000000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:19:99:9e:88:a7 re0: [MPSAFE] re0: [FILTER] pcib3: at device 7.0 on pci0 pcib3: domain 0 pcib3: secondary bus 8 pcib3: subordinate bus 13 pcib3: I/O decode 0xb000-0xbfff pcib3: memory decode 0xf8500000-0xf85fffff pcib3: prefetched decode 0xf8100000-0xf81fffff pci8: on pcib3 pci8: domain=0, physical bus=8 found-> vendor=0x10ec, dev=0x8168, revid=0x02 domain=0, bus=8, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0xb000, size 8, enabled pcib3: requested I/O range 0xb000-0xb0ff: in range map[18]: type Memory, range 64, base 0xf8500000, size 12, enabled pcib3: requested memory range 0xf8500000-0xf8500fff: good map[20]: type Prefetchable Memory, range 64, base 0xf8100000, size 16, enabled pcib3: requested memory range 0xf8100000-0xf810ffff: good pcib3: matched entry for 8.0.INTA pcib3: slot 0 INTA hardwired to IRQ 19 re1: port 0xb000-0xb0ff mem 0xf8500000-0xf8500fff,0xf8100000-0xf810ffff irq 19 at device 0.0 on pci8 re1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf8500000 re1: MSI count : 1 re1: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 50 re1: using IRQ 257 for MSI re1: Using 1 MSI messages re1: Chip rev. 0x3c000000 re1: MAC rev. 0x00000000 miibus1: on re1 rgephy1: PHY 1 on miibus1 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re1: bpf attached re1: Ethernet address: 00:19:99:9e:83:00 re1: [MPSAFE] re1: [FILTER] atapci0: port 0x8440-0x8447,0x8434-0x8437,0x8438-0x843f,0x8430-0x8433,0x8400-0x840f mem 0xf880a000-0xf880a3ff irq 22 at device 18.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8400 atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xf880a000 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI v1.10 controller with 4 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ SNTF MPS AL CLO 3Gbps PM PMD 32cmd CCC 4ports ata2: on atapci0 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect timeout status=00000000 ata2: AHCI reset done: phy reset found no device ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect time=0ms status=00000123 ata3: ready wait time=9ms ata3: software reset port 15... ata3: ahci_issue_cmd timeout: 3000 of 3000ms, status=00000001 ata3: port is not ready (timeout 0ms) tfd = 000001d0 ata3: software reset clear timeout ata3: software reset port 0... ata3: ready wait time=0ms ata3: SIGNATURE: 00000101 ata3: AHCI reset done: devices=00000001 ata3: [MPSAFE] ata3: [ITHREAD] ata4: on atapci0 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect timeout status=00000000 ata4: AHCI reset done: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci0 ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: [MPSAFE] ata5: [ITHREAD] ohci0: mem 0xf8804000-0xf8804fff irq 16 at device 19.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: on ohci0 ohci1: mem 0xf8805000-0xf8805fff irq 17 at device 19.1 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 53 ohci1: [MPSAFE] ohci1: [ITHREAD] usbus1: on ohci1 ohci2: mem 0xf8806000-0xf8806fff irq 18 at device 19.2 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 ohci2: [MPSAFE] ohci2: [ITHREAD] usbus2: on ohci2 ohci3: mem 0xf8807000-0xf8807fff irq 17 at device 19.3 on pci0 ohci3: [MPSAFE] ohci3: [ITHREAD] usbus3: on ohci3 ohci4: mem 0xf8808000-0xf8808fff irq 18 at device 19.4 on pci0 ohci4: [MPSAFE] ohci4: [ITHREAD] usbus4: on ohci4 ehci0: mem 0xf880a400-0xf880a4ff irq 19 at device 19.5 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 55 ehci0: [MPSAFE] ehci0: [ITHREAD] ehci0: AMD SB600/700 quirk applied ehci0: Dropped interrupts workaround enabled usbus5: EHCI version 1.0 usbus5: on ehci0 pci0: at device 20.0 (no driver attached) atapci1: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8420-0x842f at device 20.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8420 ata0: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=7f ostat1=7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: reset tp2 stat0=ff stat1=ff devices=0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56 ata0: [MPSAFE] ata0: [ITHREAD] pci0: at device 20.2 (no driver attached) isab0: at device 20.3 on pci0 isa0: on isab0 pcib4: at device 20.4 on pci0 pcib4: domain 0 pcib4: secondary bus 14 pcib4: subordinate bus 19 pcib4: I/O decode 0xf000-0xfff pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pci14: on pcib4 pci14: domain=0, physical bus=14 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0xffffffff (1) atkbd: failed to reset the keyboard. kbd0 at atkbd0 kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0067 psm0: failed to reset the aux device. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 58 uart0: [FILTER] uart0: fast interrupt uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 59 uart1: [FILTER] uart1: fast interrupt ahc_isa_probe 0: ioport 0xc00 alloc failed ex_isa_identify() pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcd7ff,0xcd800-0xce7ff,0xce800-0xcf7ff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata1 failed to probe at port 0x170 irq 15 on isa0 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sio0 failed to probe at port 0x3f8 irq 4 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices powernow0: on cpu0 powernow0: STATUS: 0x181a1a18020202 powernow0: STATUS: maxfid: 0x02 powernow0: STATUS: maxvid: 0x18 powernow0: PSB: VST: 5 powernow0: PSB: RVO 2 IRT 3 MVS 0 BATT 0 powernow: 0 995000kHz FID 02 VID 1a powernow: 1 995000kHz FID 02 VID 1a Device configuration finished. Reducing kern.maxvnodes 125729 -> 100000 procfs registered lapic: Divisor 2, Frequency 99999658 Hz Timecounter "TSC" frequency 999996424 Hz quality 800 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining crypto: IPsec: Initialized Security Association Processing. lo0: bpf attached pfsync0: bpf attached enc0: bpf attached pflog0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00000000 ata0: New devices: 00000000 ata2: Identifying devices: 00000000 ata2: New devices: 00000000 ata3: Identifying devices: 00000001 ata3: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: setting UDMA100 ad6: 152627MB at ata3-master UDMA100 SATA 3Gb/s ad6: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad6 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ad6: Silicon Image check1 failed ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000000 ata5: New devices: 00000000 ATA PseudoRAID loaded Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered Root mount waiting for: usbus5 Root mount waiting for: usbus5 Root mount waiting for: usbus5 Root mount waiting for: usbus5 uhub5: 10 ports with 10 removable, self powered Trying to mount root from ufs:/dev/ad6s1a ct_to_ts([2012-01-09 19:45:39]) = 1326138339.000000000 start_init: trying /sbin/init ugen3.2: at usbus3 ukbd0: on usbus3 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 uhid0: on usbus3 pflog0: promiscuous mode enabled fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8