Is there way to make acpi work on fujitsu-siemens (amd 2500+)? 
I have tried to search google, but no go. dmesg and sysctl outputs are below. 
acpiconf -s 1 or 2 doesn't work. I guess because those errors.
Have someone made it work on fujitsu-siemens?
I would be grateful for any help you can give me. And is there any new patches for acpi, or something? 
Using FreeBSD - current. There was no luck either 4.8.
 
dmesg output:

Preloaded elf module "/boot/kernel/acpi.ko" at 0xc098821c.
acpi0: <PTLTD    RSDT  > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node 0xc40e49c0), AE_AML_UNINITIALIZED_LOCAL
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node 0xc40e49c0), AE_AML_UNINITIALIZED_LOCAL
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_tz0: _CRT value is absurd, ignored (205.0C)
acpi_tz0: _PSV value is absurd, ignored (200.0C)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node 0xc40e49c0), AE_AML_UNINITIALIZED_LOCAL
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node 0xc40e49c0), AE_AML_UNINITIALIZED_LOCAL
pci0: <ACPI PCI bus> on pcib0
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node 0xc40e49c0), AE_AML_UNINITIALIZED_LOCAL
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node 0xc40e49c0), AE_AML_UNINITIALIZED_LOCAL
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 0 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
acpi_ec0: <Embedded Controller: GPE 0x19> port 0x66,0x62 on acpi0
    ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc4171e00), AE_NO_HARDWARE_RESPONSE
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc4171e00), AE_NO_HARDWARE_RESPONSE
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
    ACPI-0438: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._BST] (Node 0xc4171dc0), AE_NO_HARDWARE_RESPONSE
 
:acpi_sysctl:
 
    acpicmbat     1     1K      1K        1  16
      acpisem    19     3K      3K       19  64,128
     acpitask     0     0K      1K        4  16,32
       acpica  1324    73K     73K    12187  16,32,64,128,256,512,1024,2048
     acpibatt     1     1K      1K        1  16
      acpidev    57     1K      1K       57  16,32
debug.acpi.acpi_ca_version: 0x20030619
debug.acpi.semaphore_debug: 0
hw.acpi.supported_sleep_state: S3 S4 S5 
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: S1
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 5
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.disable_on_poweroff: 1
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 30
hw.acpi.thermal.tz0.temperature: 3332
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: -1
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: -1
hw.acpi.thermal.tz0._ACx: 3432 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.battery.life: 59
hw.acpi.battery.time: -1
hw.acpi.battery.state: 1
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 0
machdep.acpi_timer_freq: 3579545
machdep.acpi_root: 1013648