Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #1: Sun Nov 16 22:13:02 EST 2003 david@wind.mindcry.org:/usr/src/sys/i386/compile/WIND Preloaded elf kernel "/boot/kernel/kernel" at 0xc08e1000. Preloaded acpi_dsdt "/boot/dell.dsl" at 0xc08e126c. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz (1695.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febf9ff real memory = 267911168 (255 MB) avail memory = 250535936 (238 MB) Pentium Pro MTRR support enabled ACPI: DSDT was overridden. ACPI-0375: *** Info: Table [DSDT] replaced by host OS acpi0: on motherboard pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00fdf40 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: port 0x530-0x537 on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib0: slot 29 INTA is routed to irq 10 pcib0: slot 29 INTB is routed to irq 11 pcib0: slot 31 INTB is routed to irq 10 pcib0: slot 31 INTB is routed to irq 10 pcib0: slot 31 INTB is routed to irq 10 agp0: mem 0xec000000-0xefffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pcib1: slot 0 INTA is routed to irq 10 pci1: at device 0.0 (no driver attached) uhci0: port 0x1800-0x181f irq 10 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Primax Electronics product 0x4d03, rev 1.00/4.41, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci1: port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib2: at device 30.0 on pci0 pci2: on pcib2 pcib2: slot 1 INTA is routed to irq 10 pcib2: slot 4 INTA is routed to irq 10 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x3000-0x307f mem 0xe8000000-0xe800007f irq 10 at device 1.0 on pci2 xl0: Ethernet address: 00:08:74:3f:d1:e3 miibus0: on xl0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto cbb0: irq 10 at device 4.0 on pci2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1840-0x184f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) pcm0: port 0x1880-0x18bf,0x1c00-0x1cff irq 10 at device 31.5 on pci0 pcm0: pci0: at device 31.6 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_acad0: on acpi0 acpi_ec0: port 0x66,0x62 on acpi0 acpi_ec0: info: new max delay is 27 us acpi_ec0: info: new max delay is 50 us acpi_ec0: info: new max delay is 130 us acpi_ec0: info: new max delay is 200 us acpi_cmbat0: on acpi0 ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 npx0: [FAST] npx0: on motherboard npx0: INT 16 interface orm0: