slot 5 3 12 A 0x68 3 4 5 7 9 10 11 12 14 15 slot 5 3 12 B 0x69 3 4 5 7 9 10 11 12 14 15 slot 5 3 12 C 0x6a 3 4 5 7 9 10 11 12 14 15 slot 5 3 12 D 0x6b 3 4 5 7 9 10 11 12 14 15 slot 6 3 13 A 0x69 3 4 5 7 9 10 11 12 14 15 slot 6 3 13 B 0x6a 3 4 5 7 9 10 11 12 14 15 slot 6 3 13 C 0x6b 3 4 5 7 9 10 11 12 14 15 slot 6 3 13 D 0x68 3 4 5 7 9 10 11 12 14 15 slot 7 3 4 A 0x6b 3 4 5 7 9 10 11 12 14 15 slot 7 3 4 B 0x68 3 4 5 7 9 10 11 12 14 15 slot 7 3 4 C 0x69 3 4 5 7 9 10 11 12 14 15 slot 7 3 4 D 0x6a 3 4 5 7 9 10 11 12 14 15 slot 8 3 3 A 0x68 3 4 5 7 9 10 11 12 14 15 slot 8 3 3 B 0x69 3 4 5 7 9 10 11 12 14 15 slot 8 3 3 C 0x69 3 4 5 7 9 10 11 12 14 15 slot 8 3 3 D 0x6a 3 4 5 7 9 10 11 12 14 15 embedded 0 3 A 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 3 B 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 3 C 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 3 D 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 31 C 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 5, width = 2 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu0: port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu1: port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu2: port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu3: port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_tz0: port 0x530-0x537 on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f0000000, size 27, enabled found-> vendor=0x8086, dev=0x2578, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2579, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x257b, revid=0x02 bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000cc00, size 5, enabled pcib0: matched entry for 0.29.INTA (source ) pcib0: device is hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24d2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 map[20]: type 4, range 32, base 0000c000, size 5, enabled pcib0: matched entry for 0.29.INTB (source ) pcib0: device is hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24d4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=19 map[20]: type 4, range 32, base 0000c400, size 5, enabled pcib0: matched entry for 0.29.INTC (source ) pcib0: device is hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24d7, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 map[20]: type 4, range 32, base 0000c800, size 5, enabled pcib0: matched entry for 0.29.INTA (source ) pcib0: device is hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24de, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 map[10]: type 1, range 32, base fa200000, size 10, enabled pcib0: matched entry for 0.29.INTD (source ) pcib0: device is hardwired to IRQ 23 found-> vendor=0x8086, dev=0x24dd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=23 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x244e, revid=0xc2 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00000000, size 3, enabled map[14]: type 4, range 32, base 00000000, size 2, enabled map[18]: type 4, range 32, base 00000000, size 3, enabled map[1c]: type 4, range 32, base 00000000, size 2, enabled map[20]: type 4, range 32, base 0000f000, size 4, enabled found-> vendor=0x8086, dev=0x24db, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00000500, size 5, enabled pcib0: matched entry for 0.31.INTB (source ) pcib0: device is hardwired to IRQ 17 found-> vendor=0x8086, dev=0x24d3, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 4, range 32, base 0000d800, size 6, enabled map[18]: type 1, range 32, base fa201000, size 9, enabled map[1c]: type 1, range 32, base fa202000, size 8, enabled pcib0: matched entry for 0.31.INTB (source ) pcib0: device is hardwired to IRQ 17 found-> vendor=0x8086, dev=0x24d5, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 powerspec 2 supports D0 D3 current D0 agp0: mem 0xf0000000-0xf7ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 128M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf8000000-0xf9ffffff pcib1: prefetched decode 0xe0000000-0xefffffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base f8000000, size 24, enabled map[14]: type 3, range 32, base e0000000, size 28, enabled pcib0: matched entry for 0.1.INTA (source ) pcib0: device is hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 found-> vendor=0x10de, dev=0x0312, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 pci1: at device 0.0 (no driver attached) pcib2: at device 3.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xa000-0xafff pcib2: memory decode 0xfa000000-0xfa0fffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.CSAB - AE_NOT_FOUND pci2: on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base fa000000, size 17, enabled map[18]: type 4, range 32, base 0000a000, size 5, enabled found-> vendor=0x8086, dev=0x1019, revid=0x00 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0238, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 em0: port 0xa000-0xa01f mem 0xfa000000-0xfa01ffff irq 5 at device 1.0 on pci2 pcib2: device em0 requested decoded memory range 0xfa000000-0xfa01ffff pcib2: device em0 requested decoded I/O range 0xa000-0xa01f em0: bpf attached em0: Speed:N/A Duplex:N/A uhci0: port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xc000-0xc01f irq 19 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xc400-0xc41f irq 18 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xc800-0xc81f irq 16 at device 29.3 on pci0 usb3: on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: at device 29.7 (no driver attached) pcib3: at device 30.0 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xb000-0xbfff pcib3: memory decode 0xfa100000-0xfa1fffff pcib3: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci3: on pcib3 pci3: physical bus=3 map[10]: type 1, range 32, base fa125000, size 11, enabled map[14]: type 1, range 32, base fa120000, size 14, enabled pcib3: matched entry for 3.3.INTA (source ) pcib3: device is hardwired to IRQ 20 found-> vendor=0x104c, dev=0x8023, revid=0x00 bus=3, slot=3, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000b000, size 6, enabled map[14]: type 4, range 32, base 0000b400, size 4, enabled map[18]: type 4, range 32, base 0000b800, size 7, enabled map[1c]: type 1, range 32, base fa124000, size 12, enabled map[20]: type 1, range 32, base fa100000, size 17, enabled pcib3: matched entry for 3.4.INTA (source ) pcib3: device is hardwired to IRQ 23 found-> vendor=0x105a, dev=0x3373, revid=0x02 bus=3, slot=4, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=144 (dwords) lattimer=0xf0 (7200 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) intpin=a, irq=23 powerspec 2 supports D0 D1 D3 current D0 fwohci0: mem 0xfa120000-0xfa123fff,0xfa125000-0xfa1257ff irq 20 at device 3.0 on pci3 fwohci0: latency timer 32 -> 32. fwohci0: cache size 8 -> 8. pcib3: device fwohci0 requested decoded memory range 0xfa125000-0xfa1257ff fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:00:35:0b:9a fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x3 loop=0, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:35:0b:9a fwe0: bpf attached sbp0: on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 atapci0: port 0xb800-0xb87f,0xb400-0xb40f,0xb000-0xb03f mem 0xfa100000-0xfa11ffff,0xfa124000-0xfa124fff irq 23 at device 4.0 on pci3 pcib3: device atapci0 requested decoded memory range 0xfa124000-0xfa124fff atapci0: [MPSAFE] ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1 ata2: at 0xfa124000 on atapci0 ata2: [MPSAFE] ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1 ata3: at 0xfa124000 on atapci0 ata3: [MPSAFE] ata4: reset tp1 mask=01 ostat0=20 ostat1=30 ata4-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20 ata4: reset tp2 mask=01 stat0=20 stat1=00 devices=0x0 ata4: at 0xfa124000 on atapci0 ata4: [MPSAFE] isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: reset tp1 mask=03 ostat0=00 ostat1=00 ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata0-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata0: reset tp2 mask=03 stat0=01 stat1=01 devices=0x0 ata0: at 0x1f0 irq 14 on atapci1 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4 ata1: at 0x170 irq 15 on atapci1 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) pcm0: port 0xd800-0xd83f,0xd400-0xd4ff mem 0xfa202000-0xfa2020ff,0xfa201000-0xfa2011ff irq 17 at device 31.5 on pci0 pcm0: pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, AMAP pcm0: sndbuf_setmap 3a8000, 4000; 0xec0d8000 -> 3a8000 pcm0: sndbuf_setmap 3b5000, 4000; 0xec0dc000 -> 3b5000 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) sio0: irq maps: 0xa021 0xa031 0xa021 0xa021 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0xa021 0xa029 0xa021 0xa021 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) psmcpnp0 irq 12 on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 unknown: status reg test failed 0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: