Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE-p1 #6: Mon Jan 26 22:18:46 EET 2004
    root@ns.intfor.ro:/usr/obj/usr/src/sys/INTFOR
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel Pentium III (501.14-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 133103616 (129984K bytes)
config> di pcic0
config> di ppc0
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 124284928 (121372K bytes)
Preloaded elf kernel "kernel" at 0xc052d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc052d09c.
VESA: v2.0, 1024k memory, flags:0x1, mode table:0xc048ffa2 (1000022)
VESA: Intel810(TM) Graphics Chip Accelerated VGA BIOS
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 4 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810 (i810 GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82810 (i810 GMCH) SVGA controller> at 1.0 irq 11
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xc0005000-0xc00050ff irq 11 at device 3.0 on pci1
rl0: Ethernet address: 00:02:44:5a:cf:6a
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: <RealTek 8139 10/100BaseTX> port 0xc400-0xc4ff mem 0xc0006000-0xc00060ff irq 10 at device 4.0 on pci1
rl1: Ethernet address: 00:30:84:3b:0a:c7
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cy0: <Cyclades Cyclom-Y Serial Adapter> port 0xc800-0xc87f mem 0xc0000000-0xc0003fff,0xc0004000-0xc000407f irq 12 at device 5.0 on pci1
cy0: driver is using old-style compatibility shims
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xf000-0xf00f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 10000 packets/entry by default
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized.  Default = pass all, Logging = enabled
ad0: 9787MB <QUANTUM FIREBALLlct10 10> [19885/16/63] at ata0-master UDMA66
Mounting root from ufs:/dev/ad0s1a
stray irq 7
stray irq 7
stray irq 7
stray irq 7
stray irq 7
too many stray irq 7's; not logging any more