Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #14: Tue Mar 23 14:17:06 PST 2004 root@adkinson245.f5net.com:/usr/obj/usr/src/sys/NEMO5 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a91000. Calibrating clock(s) ... i8254 clock: 1193090 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 930163681 Hz CPU: Intel Pentium III (930.16-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff real memory = 1073741824 (1024 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000003edcffff, 1041932288 bytes (254378 pages) avail memory = 1041215488 (992 MB) bios32: Found BIOS32 Service Directory header at 0xc00f73f0 bios32: Entry = 0xfd830 (c00fd830) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd830+0x18f pnpbios: Found PnP BIOS data at 0xc00f7420 pnpbios: Entry = f0000:a206 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: random: mem: Pentium Pro MTRR support enabled cpu0 on motherboard npx0: [FAST] npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80007904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166) pcibios: BIOS version 2.10 Found $PIR table, 12 entries at 0xc00fdf00 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 15 1 0 A 0x12 3 4 5 6 7 10 11 12 slot 15 1 0 B 0x14 3 4 5 6 7 10 11 12 embedded 0 15 A 0x02 3 4 5 6 7 10 11 12 embedded 0 1 A 0x1e 3 4 5 6 7 10 11 12 embedded 0 1 B 0x1d 3 4 5 6 7 10 11 12 embedded 0 2 A 0x1f 3 4 5 6 7 10 11 12 embedded 0 7 A 0x18 3 4 5 6 7 10 11 12 slot 1 0 3 A 0x11 3 4 5 6 7 10 11 12 slot 1 0 3 B 0x12 3 4 5 6 7 10 11 12 slot 1 0 3 C 0x13 3 4 5 6 7 10 11 12 slot 1 0 3 D 0x14 3 4 5 6 7 10 11 12 slot 2 0 4 A 0x13 3 4 5 6 7 10 11 12 slot 2 0 4 B 0x14 3 4 5 6 7 10 11 12 slot 2 0 4 C 0x11 3 4 5 6 7 10 11 12 slot 2 0 4 D 0x12 3 4 5 6 7 10 11 12 slot 3 0 5 A 0x15 3 4 5 6 7 10 11 12 slot 3 0 5 B 0x16 3 4 5 6 7 10 11 12 slot 3 0 5 C 0x1d 3 4 5 6 7 10 11 12 slot 3 0 5 D 0x1e 3 4 5 6 7 10 11 12 slot 4 2 1 A 0x19 3 4 5 6 7 10 11 12 slot 4 2 1 B 0x1a 3 4 5 6 7 10 11 12 slot 4 2 1 C 0x1b 3 4 5 6 7 10 11 12 slot 4 2 1 D 0x1c 3 4 5 6 7 10 11 12 slot 5 2 2 A 0x1b 3 4 5 6 7 10 11 12 slot 5 2 2 B 0x1c 3 4 5 6 7 10 11 12 slot 5 2 2 C 0x19 3 4 5 6 7 10 11 12 slot 5 2 2 D 0x1a 3 4 5 6 7 10 11 12 slot 6 0 6 A 0x17 3 4 5 6 7 10 11 12 slot 6 0 6 B 0x18 3 4 5 6 7 10 11 12 slot 6 0 6 C 0x15 3 4 5 6 7 10 11 12 slot 6 0 6 D 0x16 3 4 5 6 7 10 11 12 pcib0: at pcibus 0 on motherboard $PIR: Links after initial probe: Link IRQ Ref IRQs 0x12 255 3 3 4 5 6 7 10 11 12 0x14 255 3 3 4 5 6 7 10 11 12 0x2 255 1 3 4 5 6 7 10 11 12 0x1e 255 2 3 4 5 6 7 10 11 12 0x1d 255 2 3 4 5 6 7 10 11 12 0x1f 255 1 3 4 5 6 7 10 11 12 0x18 255 2 3 4 5 6 7 10 11 12 0x11 255 2 3 4 5 6 7 10 11 12 0x13 255 2 3 4 5 6 7 10 11 12 0x15 255 2 3 4 5 6 7 10 11 12 0x16 255 2 3 4 5 6 7 10 11 12 0x19 255 2 3 4 5 6 7 10 11 12 0x1a 255 2 3 4 5 6 7 10 11 12 0x1b 255 2 3 4 5 6 7 10 11 12 0x1c 255 2 3 4 5 6 7 10 11 12 0x17 255 1 3 4 5 6 7 10 11 12 $PIR: Found matching pin for 1.0.INTA at func 0: 11 $PIR: Found matching pin for 0.15.INTA at func 2: 11 $PIR: Found matching pin for 0.2.INTA at func 0: 7 $PIR: Found matching pin for 0.7.INTA at func 0: 11 $PIR: Found matching pin for 0.3.INTA at func 0: 11 $PIR: Found matching pin for 0.4.INTA at func 0: 10 $PIR: Found matching pin for 0.5.INTA at func 0: 5 $PIR: Found matching pin for 0.6.INTA at func 0: 12 $PIR: Links after initial IRQ discovery: Link IRQ Ref IRQs 0x12 11 3 3 4 5 6 7 10 11 12 0x14 255 3 3 4 5 6 7 10 11 12 0x2 11 1 3 4 5 6 7 10 11 12 0x1e 255 2 3 4 5 6 7 10 11 12 0x1d 255 2 3 4 5 6 7 10 11 12 0x1f 7 1 3 4 5 6 7 10 11 12 0x18 11 2 3 4 5 6 7 10 11 12 0x11 11 2 3 4 5 6 7 10 11 12 0x13 10 2 3 4 5 6 7 10 11 12 0x15 5 2 3 4 5 6 7 10 11 12 0x16 255 2 3 4 5 6 7 10 11 12 0x19 255 2 3 4 5 6 7 10 11 12 0x1a 255 2 3 4 5 6 7 10 11 12 0x1b 255 2 3 4 5 6 7 10 11 12 0x1c 255 2 3 4 5 6 7 10 11 12 0x17 12 1 3 4 5 6 7 10 11 12 $PIR: IRQs used by BIOS: 5 7 10 11 12 $PIR: Interrupt Weights: [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] [ 0 0 0 0 0 2 0 1 0 0 2 8 1 0 0 0 ] pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base fc000000, size 25, memory disabled map[14]: type 1, range 32, base feafb000, size 12, memory disabled found-> vendor=0x1166, dev=0x0007, revid=0x22 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0005, revid=0x01 bus=0, slot=0, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x22b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0006, revid=0x00 bus=0, slot=0, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0xa200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0006, revid=0x00 bus=0, slot=0, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x2200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000f8c0, size 6, enabled $PIR: 0:2 INTA routed to irq 7 found-> vendor=0x1274, dev=0x1371, revid=0x08 bus=0, slot=2, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=7 powerspec 1 supports D0 D2 D3 current D0 map[10]: type 3, range 32, base fe3ff000, size 12, enabled map[14]: type 4, range 32, base 0000fca0, size 5, enabled map[18]: type 1, range 32, base fe600000, size 20, enabled $PIR: 0:3 INTA routed to irq 11 found-> vendor=0x8086, dev=0x1229, revid=0x04 bus=0, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base feaf8000, size 12, enabled map[14]: type 4, range 32, base 0000fc00, size 6, enabled map[18]: type 1, range 32, base fe800000, size 20, enabled $PIR: 0:4 INTA routed to irq 10 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000f8a8, size 3, enabled map[14]: type 4, range 32, base 0000f8b0, size 3, enabled map[18]: type 4, range 32, base 0000f8b8, size 3, enabled map[1c]: type 4, range 32, base 0000fc88, size 3, enabled $PIR: 0:5 INTA routed to irq 5 found-> vendor=0x1407, dev=0x0180, revid=0x00 bus=0, slot=5, func=0 class=07-00-02, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type 4, range 32, base 0000f888, size 3, enabled map[14]: type 4, range 32, base 0000f890, size 3, enabled map[18]: type 4, range 32, base 0000f898, size 3, enabled map[1c]: type 4, range 32, base 0000f8a0, size 3, enabled $PIR: 0:5 INTA routed to irq 5 found-> vendor=0x1407, dev=0x0181, revid=0x00 bus=0, slot=5, func=1 class=07-00-02, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type 1, range 32, base feaff000, size 12, enabled map[14]: type 4, range 32, base 0000fc40, size 6, enabled map[18]: type 1, range 32, base fe700000, size 20, enabled $PIR: 0:6 INTA routed to irq 12 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=6, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base feaf9000, size 12, enabled map[14]: type 4, range 32, base 0000fcc0, size 6, enabled map[18]: type 1, range 32, base fe900000, size 20, enabled $PIR: 0:7 INTA routed to irq 11 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=7, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[90]: type 4, range 32, base 00000500, size 4, enabled found-> vendor=0x1166, dev=0x0200, revid=0x4f bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fc90, size 4, enabled found-> vendor=0x1166, dev=0x0211, revid=0x00 bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base feafe000, size 12, enabled $PIR: 0:15 INTA routed to irq 11 found-> vendor=0x1166, dev=0x0220, revid=0x04 bus=0, slot=15, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=11 pcib1: at device 0.1 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfe500000-0xfe5fffff pcib1: prefetched decode 0xf0000000-0xf7ffffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f0000000, size 27, enabled map[14]: type 4, range 32, base 0000e800, size 8, enabled map[18]: type 1, range 32, base fe5f0000, size 16, enabled $PIR: 1:0 INTA routed to irq 11 found-> vendor=0x1002, dev=0x5157, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0287, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: at device 0.0 (no driver attached) pcm0: port 0xf8c0-0xf8ff irq 7 at device 2.0 on pci0 pcm0: pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features AMAP pcm0: sndbuf_setmap 2a3000, 1000; 0xc620f000 -> 2a3000 pcm0: sndbuf_setmap 285000, 1000; 0xc6211000 -> 285000 fxp0: port 0xfca0-0xfcbf mem 0xfe600000-0xfe6fffff,0xfe3ff000-0xfe3fffff irq 11 at device 3.0 on pci0 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 0009 0004 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:a0:c9:8d:e9:51 fxp1: port 0xfc00-0xfc3f mem 0xfe800000-0xfe8fffff,0xfeaf8000-0xfeaf8fff irq 10 at device 4.0 on pci0 fxp1: using memory space register mapping fxp1: PCI IDs: 8086 1229 8086 000e 0008 fxp1: Dynamic Standby mode is disabled miibus1: on fxp1 inphy1: on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: bpf attached fxp1: Ethernet address: 00:d0:b7:6b:f5:92 puc0: port 0xfc88-0xfc8f,0xf8b8-0xf8bf,0xf8b0-0xf8b7,0xf8a8-0xf8af irq 5 at device 5.0 on pci0 sio4: on puc0 sio4: type 16550A sio4: unable to activate interrupt in fast mode - using normal mode sio5: on puc0 sio5: type 16550A sio5: unable to activate interrupt in fast mode - using normal mode sio6: on puc0 sio6: type 16550A sio6: unable to activate interrupt in fast mode - using normal mode sio7: on puc0 sio7: type 16550A sio7: unable to activate interrupt in fast mode - using normal mode pci0: at device 5.1 (no driver attached) fxp2: port 0xfc40-0xfc7f mem 0xfe700000-0xfe7fffff,0xfeaff000-0xfeafffff irq 12 at device 6.0 on pci0 fxp2: using memory space register mapping fxp2: PCI IDs: 8086 1229 8086 000c 0008 fxp2: Dynamic Standby mode is disabled miibus2: on fxp2 inphy2: on miibus2 inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp2: bpf attached fxp2: Ethernet address: 00:d0:b7:4c:b3:01 fxp3: port 0xfcc0-0xfcff mem 0xfe900000-0xfe9fffff,0xfeaf9000-0xfeaf9fff irq 11 at device 7.0 on pci0 fxp3: using memory space register mapping fxp3: PCI IDs: 8086 1229 8086 000c 0008 fxp3: Dynamic Standby mode is disabled miibus3: on fxp3 inphy3: on miibus3 inphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp3: bpf attached fxp3: Ethernet address: 00:e0:81:00:f6:bf isab0: port 0x500-0x50f at device 15.0 on pci0 isa0: on isab0 atapci0: port 0xfc90-0xfc9f at device 15.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x7f msb=0x7f ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ohci0: mem 0xfeafe000-0xfeafefff irq 11 at device 15.2 on pci0 ohci0: (New OHCI DeviceId=0x02201166) usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered uhub0: device problem, disabling port 2 pcib2: at pcibus 2 on motherboard pci2: on pcib2 pci2: physical bus=2 ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff pnpbios: 18 devices, largest 178 bytes PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0xe0-0xe1, size=0x2, align=0x1 PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 pnpbios: handle 0 device ID PNP0c02 (020cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xe8000-0xfffff, size=0x18000 PNP0c01: adding fixed memory32 range 0x100000-0x3fffffff, size=0x3ff00000 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 5 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 8 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 pnpbios: handle 9 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x510-0x513, size=0x4, align=0x1 PNP0c02: adding io range 0x514-0x515, size=0x2, align=0x1 PNP0c02: adding io range 0x518-0x51b, size=0x4, align=0x1 PNP0c02: adding io range 0x520-0x521, size=0x2, align=0x1 PNP0c02: adding io range 0x524-0x529, size=0x6, align=0x1 PNP0c02: adding io range 0x538-0x53f, size=0x8, align=0x1 PNP0c02: adding io range 0x530-0x530, size=0x1, align=0x1 PNP0c02: adding io range 0x500-0x50d, size=0xe, align=0x1 PNP0c02: adding io range 0x40b-0x40b, size=0x1, align=0x1 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x4d6-0x4d6, size=0x1, align=0x1 PNP0c02: adding io range 0xc00-0xc01, size=0x2, align=0x1 PNP0c02: adding io range 0xc06-0xc08, size=0x3, align=0x1 PNP0c02: adding io range 0xc14-0xc14, size=0x1, align=0x1 PNP0c02: adding io range 0xc49-0xc4a, size=0x2, align=0x1 PNP0c02: adding io range 0xc50-0xc52, size=0x3, align=0x1 PNP0c02: adding io range 0xc6c-0xc6c, size=0x1, align=0x1 PNP0c02: adding io range 0xc6f-0xc6f, size=0x1, align=0x1 PNP0c02: adding io range 0xcd6-0xcd7, size=0x2, align=0x1 PNP0c02: adding io range 0xf50-0xf58, size=0x9, align=0x1 pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000 PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 pnpbios: handle 11 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0x540-0x55f, size=0x20, align=0x1 pnpbios: handle 12 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xce800-0xcffff, size=0x1800 pnpbios: handle 13 device ID PNP0c02 (020cd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x10 pnpbios: handle 15 device ID PNP0501 (0105d041) PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x8 pnpbios: handle 16 device ID PNP0501 (0105d041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 17 device ID PNP0700 (0007d041) pnpbios: handle 19 device ID PNP0400 (0004d041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: