Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #3: Tue Apr  6 15:24:51 CEST 2004
    root@fw.reifenberger.com:/usr/src/sys/i386/compile/fw
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0948000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09481d8.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: VIA C3 Nehemiah (1002.28-MHz 686-class CPU)
  Origin = "CentaurHauls"  Id = 0x693  Stepping = 3
  Features=0x380b03d<FPU,DE,PSE,TSC,MSR,MTRR,PGE,CMOV,MMX,FXSR,SSE>
real memory  = 520028160 (495 MB)
avail memory = 498954240 (475 MB)
cpu0 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VT9174 AWRDACPI> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fdeb0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 15 INTA is routed to irq 12
pcib0: slot 16 INTA is routed to irq 11
pcib0: slot 16 INTB is routed to irq 9
pcib0: slot 16 INTC is routed to irq 11
pcib0: slot 16 INTD is routed to irq 12
pcib0: slot 17 INTC is routed to irq 11
pcib0: slot 18 INTA is routed to irq 11
pcib0: slot 19 INTA is routed to irq 11
pcib0: slot 20 INTA is routed to irq 9
agp0: <VIA Generic host to PCI bridge> mem 0xe7000000-0xe73fffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xc000-0xc0ff mem 0xe740b000-0xe740b0ff irq 12 at device 15.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:40:63:c9:f7:f1
vr0: [GIANT-LOCKED]
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 11 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 9 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ucom0: Prolific Technology PL2303 Serial adapter (ATEN/IOGEAR UC232A), rev 1.10/2.02, addr 2
uhci2: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 11 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe740c000-0xe740c0ff irq 12 at device 16.3 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: (0x1106) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xd000-0xd00f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <VIA VT8235> port 0xd400-0xd4ff irq 11 at device 17.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <VIA Technologies VIA1612A AC97 Codec>
vr1: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd800-0xd8ff mem 0xe740e000-0xe740e0ff irq 11 at device 18.0 on pci0
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: Ethernet address: 00:40:63:c9:f7:f0
vr1: [GIANT-LOCKED]
hifn0 mem 0xe7400000-0xe7407fff,0xe7408000-0xe7409fff,0xe740a000-0xe740afff irq 11 at device 19.0 on pci0
hifn0: [GIANT-LOCKED]
hifn0: Hifn 7955, rev 0, 32KB dram, 64 sessions
isic0: <ELSA MicroLink ISDN/PCI> port 0xe000-0xe003,0xdc00-0xdc7f mem 0xe740d000-0xe740d07f irq 9 at device 20.0 on pci0
isic0: passive stack unit 0
isic0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio2 port 0x3e8-0x3ef irq 5 on acpi0
sio2: type 16550A
sio3 port 0x2e8-0x2ef irq 10 on acpi0
sio3: type 16550A
orm0: <Option ROM> at iomem 0xc0000-0xcdfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1002278837 Hz quality 800
Timecounters tick every 10.000 msec
i4btrc: 4 ISDN trace device(s) attached
i4btel: 2 ISDN telephony interface device(s) attached
i4bctl: ISDN system control port attached
i4bing: 2 i4b NetGraph ISDN B-channel device(s) attached
i4b: ISDN call control device attached
Fast IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 30520MB <IBM-DJSA-232> [62010/16/63] at ata0-master UDMA66
acd0: CDRW <DW-224E-A> at ata1-slave PIO4
ucom0: at uhub1 port 1 (addr 2) disconnected
ucom0: detached
ucom0: Prolific Technology PL2303 Serial adapter (ATEN/IOGEAR UC232A), rev 1.10/2.02, addr 2
cd0 at ata1 bus 0 target 1 lun 0
cd0: <TEAC DW-224E-A V.2A> Fixed CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
/: mount pending error: blocks 12 files 2
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 20 files 3
pflog0: promiscuous mode enabled