KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=000000000009d000 SMAP type=02 base=000000000009d000 len=0000000000003000 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=01 base=0000000000100000 len=000000004fefb000 SMAP type=03 base=000000004fffb000 len=0000000000004000 SMAP type=04 base=000000004ffff000 len=0000000000001000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #2: Thu Aug 12 01:23:35 CEST 2004 daniel@fortify.satra.zapto.org:/usr/obj/usr/src/sys/FORTIFY Preloaded elf kernel "/boot/kernel/kernel" at 0xc089b000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc089b254. Calibrating clock(s) ... i8254 clock: 1193226 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1999782501 Hz CPU: AMD Athlon(TM) XP 2500+ (1999.78-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 Features=0x383fbff AMD Features=0xc0400000 Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 1342156800 (1279 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000004e94afff, 1305628672 bytes (318757 pages) avail memory = 1305075712 (1244 MB) Table 'FACP' at 0x4fffb0b2 Table 'BOOT' at 0x4fffb030 Table 'APIC' at 0x4fffb058 MADT: Found table at 0x4fffb058 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled ACPI APIC Table: bios32: Found BIOS32 Service Directory header at 0xc00f2000 bios32: Entry = 0xf1940 (c00f1940) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x1970 pnpbios: Found PnP BIOS data at 0xc00f9cb0 pnpbios: Entry = f0000:9ce0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: intr override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff mem: Pentium Pro MTRR support enabled null: random: io: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [GIANT-LOCKED] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31891106) pcibios: BIOS version 2.10 Found $PIR table, 11 entries at 0xc00f1f20 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 1 0 12 A 0x05 3 4 5 7 9 10 11 12 slot 1 0 12 B 0x01 3 4 5 7 9 10 11 12 slot 1 0 12 C 0x02 3 4 5 7 9 10 11 12 slot 1 0 12 D 0x03 3 4 5 7 9 10 11 12 slot 2 0 13 A 0x01 3 4 5 7 9 10 11 12 slot 2 0 13 B 0x02 3 4 5 7 9 10 11 12 slot 2 0 13 C 0x03 3 4 5 7 9 10 11 12 slot 2 0 13 D 0x05 3 4 5 7 9 10 11 12 slot 3 0 14 A 0x02 3 4 5 7 9 10 11 12 slot 3 0 14 B 0x03 3 4 5 7 9 10 11 12 slot 3 0 14 C 0x05 3 4 5 7 9 10 11 12 slot 3 0 14 D 0x01 3 4 5 7 9 10 11 12 slot 4 0 19 A 0x03 3 4 5 7 9 10 11 12 slot 4 0 19 B 0x05 3 4 5 7 9 10 11 12 slot 4 0 19 C 0x01 3 4 5 7 9 10 11 12 slot 4 0 19 D 0x02 3 4 5 7 9 10 11 12 slot 5 0 11 A 0x05 3 4 5 7 9 10 11 12 slot 5 0 11 B 0x01 3 4 5 7 9 10 11 12 slot 5 0 11 C 0x02 3 4 5 7 9 10 11 12 slot 5 0 11 D 0x03 3 4 5 7 9 10 11 12 slot 6 0 10 A 0x01 3 4 5 7 9 10 11 12 slot 6 0 10 B 0x02 3 4 5 7 9 10 11 12 slot 6 0 10 C 0x03 3 4 5 7 9 10 11 12 slot 6 0 10 D 0x05 3 4 5 7 9 10 11 12 slot 7 1 0 A 0x01 3 4 5 7 9 10 11 12 slot 7 1 0 B 0x02 3 4 5 7 9 10 11 12 embedded 0 15 A 0x06 3 4 5 7 9 10 11 12 embedded 0 15 B 0x07 3 4 5 7 9 10 11 12 embedded 0 16 A 0x06 3 4 5 7 9 10 11 12 embedded 0 16 B 0x07 3 4 5 7 9 10 11 12 embedded 0 16 C 0x08 3 4 5 7 9 10 11 12 embedded 0 16 D 0x09 3 4 5 7 9 10 11 12 embedded 0 17 C 0x08 3 4 5 7 9 10 11 12 embedded 0 17 D 0x09 3 4 5 7 9 10 11 12 embedded 0 18 A 0x06 3 4 5 7 9 10 11 12 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 17 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 17 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 15 func 0 acpi0: Power Button (fixed) acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 18 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 2 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 3 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 4 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 5 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) cpu0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x1106, dev=0x3189, revid=0x80 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0xb198, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000d800, size 3, enabled map[14]: type 4, range 32, base 0000d400, size 2, enabled map[18]: type 4, range 32, base 0000d000, size 3, enabled map[1c]: type 4, range 32, base 0000b800, size 2, enabled map[20]: type 4, range 32, base 0000b400, size 8, enabled found-> vendor=0x1103, dev=0x0008, revid=0x07 bus=0, slot=10, func=0 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000b000, size 3, enabled map[14]: type 4, range 32, base 0000a800, size 2, enabled map[18]: type 4, range 32, base 0000a400, size 3, enabled map[1c]: type 4, range 32, base 0000a000, size 2, enabled map[20]: type 4, range 32, base 00009800, size 8, enabled found-> vendor=0x1103, dev=0x0008, revid=0x07 bus=0, slot=10, func=1 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00009400, size 8, enabled map[14]: type 1, range 64, base ed800000, size 12, enabled found-> vendor=0x9005, dev=0x0080, revid=0x02 bus=0, slot=12, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00009000, size 3, enabled map[14]: type 4, range 32, base 00008800, size 2, enabled map[18]: type 4, range 32, base 00008400, size 3, enabled map[1c]: type 4, range 32, base 00008000, size 2, enabled map[20]: type 4, range 32, base 00007800, size 8, enabled found-> vendor=0x1103, dev=0x0008, revid=0x07 bus=0, slot=14, func=0 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00007400, size 3, enabled map[14]: type 4, range 32, base 00007000, size 2, enabled map[18]: type 4, range 32, base 00006800, size 3, enabled map[1c]: type 4, range 32, base 00006400, size 2, enabled map[20]: type 4, range 32, base 00006000, size 8, enabled found-> vendor=0x1103, dev=0x0008, revid=0x07 bus=0, slot=14, func=1 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00005800, size 3, enabled map[14]: type 4, range 32, base 00005400, size 2, enabled map[18]: type 4, range 32, base 00005000, size 3, enabled map[1c]: type 4, range 32, base 00004800, size 2, enabled map[20]: type 4, range 32, base 00004400, size 4, enabled map[24]: type 4, range 32, base 00004000, size 8, enabled found-> vendor=0x1106, dev=0x3149, revid=0x80 bus=0, slot=15, func=0 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00003800, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=14 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00003400, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x81 bus=0, slot=16, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 00003000, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x81 bus=0, slot=16, func=1 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 00002800, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x81 bus=0, slot=16, func=2 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 00002400, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x81 bus=0, slot=16, func=3 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ed000000, size 8, enabled found-> vendor=0x1106, dev=0x3104, revid=0x86 bus=0, slot=16, func=4 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1106, dev=0x3227, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002000, size 8, enabled map[14]: type 1, range 32, base ec800000, size 8, enabled found-> vendor=0x1106, dev=0x3065, revid=0x78 bus=0, slot=18, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0097, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00001800, size 8, enabled map[14]: type 1, range 32, base ec000000, size 8, enabled found-> vendor=0x10ec, dev=0x8169, revid=0x10 bus=0, slot=19, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000 agp0: allocating GATT for aperture of size 240M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xdfff pcib1: memory decode 0xee000000-0xefdfffff pcib1: prefetched decode 0xeff00000-0xf7ffffff ACPI PCI link initial configuration: pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base ee000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xee000000-0xeeffffff map[14]: type 3, range 32, base f0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xf0000000-0xf7ffffff found-> vendor=0x10de, dev=0x0150, revid=0xa3 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 1 supports D0 D3 current D0 pci1: at device 0.0 (no driver attached) atapci0: port 0xb400-0xb4ff,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 irq 11 at device 10.0 on pci0 atapci0: Reserved 0x100 bytes for rid 0x20 type 4 at 0xb400 atapci0: [MPSAFE] atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd400 ata2: reset tp1 mask=03 ostat0=50 ostat1=50 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=50 devices=0x3 ata2: at 0xd800 on atapci0 ata2: [MPSAFE] atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd000 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800 ata3: reset tp1 mask=03 ostat0=50 ostat1=50 ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=50 devices=0x3 ata3: at 0xd000 on atapci0 ata3: [MPSAFE] atapci1: port 0x9800-0x98ff,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xb000-0xb007 irq 11 at device 10.1 on pci0 atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0x9800 atapci1: [MPSAFE] atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xb000 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xa800 ata4: reset tp1 mask=03 ostat0=50 ostat1=50 ata4-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata4-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 stat0=50 stat1=50 devices=0x3 ata4: at 0xb000 on atapci1 ata4: [MPSAFE] atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xa400 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xa000 ata5: reset tp1 mask=03 ostat0=50 ostat1=50 ata5-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata5-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata5: reset tp2 stat0=50 stat1=50 devices=0x3 ata5: at 0xa400 on atapci1 ata5: [MPSAFE] ahc0: port 0x9400-0x94ff mem 0xed800000-0xed800fff irq 3 at device 12.0 on pci0 ahc0: Defaulting to MEMIO on ahc0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xed800000 ahc0: Reading SEEPROM...done. ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 423 instructions downloaded ahc0: Features 0x1def6, Bugs 0x40, Flags 0x20485560 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs atapci2: port 0x7800-0x78ff,0x8000-0x8003,0x8400-0x8407,0x8800-0x8803,0x9000-0x9007 irq 10 at device 14.0 on pci0 atapci2: Reserved 0x100 bytes for rid 0x20 type 4 at 0x7800 atapci2: [MPSAFE] atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9000 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8800 ata6: reset tp1 mask=03 ostat0=50 ostat1=50 ata6-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata6-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata6: reset tp2 stat0=50 stat1=50 devices=0x3 ata6: at 0x9000 on atapci2 ata6: [MPSAFE] atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x8400 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x8000 ata7: reset tp1 mask=03 ostat0=50 ostat1=50 ata7-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata7-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata7: reset tp2 stat0=50 stat1=50 devices=0x3 ata7: at 0x8400 on atapci2 ata7: [MPSAFE] atapci3: port 0x6000-0x60ff,0x6400-0x6403,0x6800-0x6807,0x7000-0x7003,0x7400-0x7407 irq 10 at device 14.1 on pci0 atapci3: Reserved 0x100 bytes for rid 0x20 type 4 at 0x6000 atapci3: [MPSAFE] atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0x7400 atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0x7000 ata8: reset tp1 mask=03 ostat0=50 ostat1=01 ata8-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata8-slave: stat=0x01 err=0x01 lsb=0x00 msb=0x00 ata8: reset tp2 stat0=50 stat1=01 devices=0x1 ata8: at 0x7400 on atapci3 ata8: [MPSAFE] atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0x6800 atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0x6400 ata9: reset tp1 mask=03 ostat0=50 ostat1=00 ata9-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata9-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata9: reset tp2 stat0=50 stat1=00 devices=0x1 ata9: at 0x6800 on atapci3 ata9: [MPSAFE] atapci4: port 0x4000-0x40ff,0x4400-0x440f,0x4800-0x4803,0x5000-0x5007,0x5400-0x5403,0x5800-0x5807 irq 9 at device 15.0 on pci0 atapci4: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4400 atapci4: [MPSAFE] atapci4: Reserved 0x8 bytes for rid 0x10 type 4 at 0x5800 atapci4: Reserved 0x4 bytes for rid 0x14 type 4 at 0x5400 ata10: reset tp1 mask=03 ostat0=50 ostat1=7f ata10-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata10-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata10-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata10-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata10-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata10-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata10-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata10-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata10-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata10: reset tp2 stat0=50 stat1=ff devices=0x1 ata10: at 0x5800 on atapci4 ata10: [MPSAFE] atapci4: Reserved 0x8 bytes for rid 0x18 type 4 at 0x5000 atapci4: Reserved 0x4 bytes for rid 0x1c type 4 at 0x4800 ata11: reset tp1 mask=03 ostat0=50 ostat1=7f ata11-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata11-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata11-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata11-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata11-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata11-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata11-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata11-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata11-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata11: reset tp2 stat0=50 stat1=ff devices=0x1 ata11: at 0x5000 on atapci4 ata11: [MPSAFE] atapci5: port 0x3800-0x380f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 14 at device 15.1 on pci0 atapci5: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3800 atapci5: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci5: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=50 devices=0x3 ata0: at 0x1f0 irq 14 on atapci5 ata0: [MPSAFE] atapci5: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci5: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=50 stat1=50 devices=0x3 ata1: at 0x170 irq 15 on atapci5 ata1: [MPSAFE] uhci0: port 0x3400-0x341f irq 5 at device 16.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3400 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x3000-0x301f irq 5 at device 16.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x2800-0x281f irq 9 at device 16.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2800 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x2400-0x241f irq 9 at device 16.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2400 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xed000000-0xed0000ff irq 11 at device 16.4 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xed000000 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 ehci_pci_attach: companion usb3 usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 vr0: port 0x2000-0x20ff mem 0xec800000-0xec8000ff irq 5 at device 18.0 on pci0 vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000 miibus0: on vr0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: bpf attached vr0: Ethernet address: 00:0e:a6:1f:29:1e vr0: [GIANT-LOCKED] re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1800 re0: port 0x1800-0x18ff mem 0xec000000-0xec0000ff irq 12 at device 19.0 on pci0 miibus1: on re0 rgephy0: on miibus1 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto re0: bpf attached re0: Ethernet address: 00:50:fc:f8:c6:81 re0: [GIANT-LOCKED] fdc0: port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 unknown: not probed (disabled) sio0: irq maps: 0xc041 0xc051 0xc041 0xc041 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcafff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xc041 0xc041 0xc041 0xc041 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1999782501 Hz quality 800 Timecounters tick every 1.000 msec DUMMYNET initialized (011031) ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging unlimited lo0: bpf attached ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on VIA 8237 chip ata0-master: setting UDMA100 on VIA 8237 chip ata0-slave: setting PIO4 on VIA 8237 chip ata0-slave: setting UDMA100 on VIA 8237 chip ad0: ATA-6 disk at ata0-master ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 120031478784 end 120031511039 ad1: ATA-6 disk at ata0-slave ad1: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ar: FreeBSD check1 failed GEOM: Configure ad0s1a, start 0 length 536870912 end 536870911 GEOM: Configure ad0s1b, start 536870912 length 536870912 end 1073741823 GEOM: Configure ad0s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad0s1d, start 1073741824 length 536870912 end 1610612735 GEOM: Configure ad0s1e, start 1610612736 length 536870912 end 2147483647 GEOM: Configure ad0s1f, start 2147483648 length 10737418240 end 12884901887 GEOM: Configure ad0s1g, start 12884901888 length 107146576896 end 120031478783 GEOM: new disk ad1 ata1-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata1-master: setting PIO4 on VIA 8237 chip ata1-master: setting UDMA100 on VIA 8237 chip ata1-slave: setting PIO4 on VIA 8237 chip ata1-slave: setting UDMA100 on VIA 8237 chip ad2: ATA-6 disk at ata1-master ad2: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA100 ar: FreeBSD check1 failed ad3: ATA-6 disk at ata1-slave ad3: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B ad3: 16 secs/int, 1 depth queue, UDMA100 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad1s1, start 32256 length 120031478784 end 120031511039 ar: FreeBSD check1 failed GEOM: new disk ad2 GEOM: new disk ad3 GEOM: Configure ad1s1b, start 536870912 length 536870912 end 1073741823 GEOM: Configure ad1s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad1s1d, start 0 length 536870912 end 536870911 GEOM: Configure ad1s1e, start 1073741824 length 536870912 end 1610612735 GEOM: Configure ad1s1f, start 1610612736 length 536870912 end 2147483647 GEOM: Configure ad1s1g, start 2147483648 length 10737418240 end 12884901887 GEOM: Configure ad1s1h, start 12884901888 length 107146576896 end 120031478783 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad2s1, start 32256 length 123518997504 end 123519029759 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad3s1, start 32256 length 123518997504 end 123519029759 GEOM: Configure ad2s1c, start 0 length 123518997504 end 123518997503 GEOM: Configure ad2s1e, start 0 length 123518997504 end 123518997503 GEOM: Configure ad3s1c, start 0 length 123518997504 end 123518997503 GEOM: Configure ad3s1e, start 0 length 123518997504 end 123518997503 ata2-slave: FAILURE - ATA_IDENTIFY no interrupt ata2-slave: FAILURE - ATA_IDENTIFY no interrupt ata2-master: FAILURE - ATA_IDENTIFY no interrupt ata2-master: FAILURE - ATA_IDENTIFY no interrupt ata3-slave: FAILURE - ATA_IDENTIFY no interrupt ata3-slave: FAILURE - ATA_IDENTIFY no interrupt ata3-master: FAILURE - ATA_IDENTIFY no interrupt ata3-master: FAILURE - ATA_IDENTIFY no interrupt ata4-slave: FAILURE - ATA_IDENTIFY no interrupt ata4-slave: FAILURE - ATA_IDENTIFY no interrupt ata4-master: FAILURE - ATA_IDENTIFY no interrupt ata4-master: FAILURE - ATA_IDENTIFY no interrupt ata5-slave: FAILURE - ATA_IDENTIFY no interrupt ata5-slave: FAILURE - ATA_IDENTIFY no interrupt ata5-master: FAILURE - ATA_IDENTIFY no interrupt ata5-master: FAILURE - ATA_IDENTIFY no interrupt ata6-slave: FAILURE - ATA_IDENTIFY no interrupt ata6-slave: FAILURE - ATA_IDENTIFY no interrupt ata6-master: FAILURE - ATA_IDENTIFY no interrupt ata6-master: FAILURE - ATA_IDENTIFY no interrupt ata7-slave: FAILURE - ATA_IDENTIFY no interrupt ata7-slave: FAILURE - ATA_IDENTIFY no interrupt ata7-master: FAILURE - ATA_IDENTIFY no interrupt ata7-master: FAILURE - ATA_IDENTIFY no interrupt ata8-master: FAILURE - ATA_IDENTIFY no interrupt ata8-master: FAILURE - ATA_IDENTIFY no interrupt ata9-master: FAILURE - ATA_IDENTIFY no interrupt ata9-master: FAILURE - ATA_IDENTIFY no interrupt ata10-master: FAILURE - ATA_IDENTIFY no interrupt ata10-master: FAILURE - ATA_IDENTIFY no interrupt Waiting 5 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.