OK boot -v -s /boot/kernel/acpi.ko text=0x467bc data=0x1cc4+0x110c syms=[0x4+0x6fa0+0x4+0x9311] KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=000000000009b800 SMAP type=02 base=000000000009b800 len=0000000000004800 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=01 base=0000000000100000 len=000000004fefb000 SMAP type=03 base=000000004fffb000 len=0000000000004000 SMAP type=04 base=000000004ffff000 len=0000000000001000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Mon Aug 16 16:46:50 CEST 2004 daniel@xxx.xxx.xxx:/usr/obj/usr/src/sys/FORTIFY Preloaded elf kernel "/boot/kernel/kernel" at 0xc08ae000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08ae254. Table 'FACP' at 0x4fffb0b2 Table 'BOOT' at 0x4fffb030 Table 'APIC' at 0x4fffb058 MADT: Found table at 0x4fffb058 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193207 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1999783191 Hz CPU: AMD Athlon(TM) XP 2500+ (1999.78-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 Features=0x383fbff AMD Features=0xc0400000 Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 1342156800 (1279 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000004e94afff, 1305628672 bytes (318757 pages) avail memory = 1304936448 (1244 MB) bios32: Found BIOS32 Service Directory header at 0xc00f2000 bios32: Entry = 0xf1940 (c00f1940) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x1970 pnpbios: Found PnP BIOS data at 0xc00f9cb0 pnpbios: Entry = f0000:9ce0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: intr override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff null: io: random: mem: Pentium Pro MTRR support enabled npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31891106) pcibios: BIOS version 2.10 Found $PIR table, 11 entries at 0xc00f1f20 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 1 0 12 A 0x05 3 4 5 7 9 10 11 12 slot 1 0 12 B 0x01 3 4 5 7 9 10 11 12 slot 1 0 12 C 0x02 3 4 5 7 9 10 11 12 slot 1 0 12 D 0x03 3 4 5 7 9 10 11 12 slot 2 0 13 A 0x01 3 4 5 7 9 10 11 12 slot 2 0 13 B 0x02 3 4 5 7 9 10 11 12 slot 2 0 13 C 0x03 3 4 5 7 9 10 11 12 slot 2 0 13 D 0x05 3 4 5 7 9 10 11 12 slot 3 0 14 A 0x02 3 4 5 7 9 10 11 12 slot 3 0 14 B 0x03 3 4 5 7 9 10 11 12 slot 3 0 14 C 0x05 3 4 5 7 9 10 11 12 slot 3 0 14 D 0x01 3 4 5 7 9 10 11 12 slot 4 0 19 A 0x03 3 4 5 7 9 10 11 12 slot 4 0 19 B 0x05 3 4 5 7 9 10 11 12 slot 4 0 19 C 0x01 3 4 5 7 9 10 11 12 slot 4 0 19 D 0x02 3 4 5 7 9 10 11 12 slot 5 0 11 A 0x05 3 4 5 7 9 10 11 12 slot 5 0 11 B 0x01 3 4 5 7 9 10 11 12 slot 5 0 11 C 0x02 3 4 5 7 9 10 11 12 slot 5 0 11 D 0x03 3 4 5 7 9 10 11 12 slot 6 0 10 A 0x01 3 4 5 7 9 10 11 12 slot 6 0 10 B 0x02 3 4 5 7 9 10 11 12 slot 6 0 10 C 0x03 3 4 5 7 9 10 11 12 slot 6 0 10 D 0x05 3 4 5 7 9 10 11 12 slot 7 1 0 A 0x01 3 4 5 7 9 10 11 12 slot 7 1 0 B 0x02 3 4 5 7 9 10 11 12 embedded 0 15 A 0x06 3 4 5 7 9 10 11 12 embedded 0 15 B 0x07 3 4 5 7 9 10 11 12 embedded 0 16 A 0x06 3 4 5 7 9 10 11 12 embedded 0 16 B 0x07 3 4 5 7 9 10 11 12 embedded 0 16 C 0x08 3 4 5 7 9 10 11 12 embedded 0 16 D 0x09 3 4 5 7 9 10 11 12 embedded 0 17 C 0x08 3 4 5 7 9 10 11 12 embedded 0 17 D 0x09 3 4 5 7 9 10 11 12 embedded 0 18 A 0x06 3 4 5 7 9 10 11 12 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 17 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 17 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 15 func 0 acpi0: Power Button (fixed) acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 18 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 2 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 3 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 4 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 5 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) cpu0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x1106, dev=0x3189, revid=0x80 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0xb198, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000d800, size 3, enabled map[14]: type 4, range 32, base 0000d400, size 2, enabled map[18]: type 4, range 32, base 0000d000, size 3, enabled map[1c]: type 4, range 32, base 0000b800, size 2, enabled map[20]: type 4, range 32, base 0000b400, size 8, enabled pcib0: matched entry for 0.10.INTA pcib0: slot 10 INTA hardwired to IRQ 16 found-> vendor=0x1103, dev=0x0008, revid=0x07 bus=0, slot=10, func=0 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000b000, size 3, enabled map[14]: type 4, range 32, base 0000a800, size 2, enabled map[18]: type 4, range 32, base 0000a400, size 3, enabled map[1c]: type 4, range 32, base 0000a000, size 2, enabled map[20]: type 4, range 32, base 00009800, size 8, enabled pcib0: matched entry for 0.10.INTA pcib0: slot 10 INTA hardwired to IRQ 16 found-> vendor=0x1103, dev=0x0008, revid=0x07 bus=0, slot=10, func=1 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00009400, size 6, enabled map[14]: type 4, range 32, base 00009000, size 4, enabled map[18]: type 4, range 32, base 00008800, size 7, enabled map[1c]: type 1, range 32, base ed800000, size 12, enabled map[20]: type 1, range 32, base ed000000, size 17, enabled pcib0: matched entry for 0.11.INTA pcib0: slot 11 INTA hardwired to IRQ 19 found-> vendor=0x105a, dev=0x3318, revid=0x02 bus=0, slot=11, func=0 class=01-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0230, cachelnsz=144 (dwords) lattimer=0x60 (2880 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) intpin=a, irq=19 powerspec 2 supports D0 D1 D3 current D0 map[10]: type 4, range 32, base 00008400, size 8, enabled map[14]: type 1, range 64, base ec800000, size 12, enabled pcib0: matched entry for 0.12.INTA pcib0: slot 12 INTA hardwired to IRQ 19 found-> vendor=0x9005, dev=0x0080, revid=0x02 bus=0, slot=12, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns) intpin=a, irq=19 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00008000, size 3, enabled map[14]: type 4, range 32, base 00007800, size 2, enabled map[18]: type 4, range 32, base 00007400, size 3, enabled map[1c]: type 4, range 32, base 00007000, size 2, enabled map[20]: type 4, range 32, base 00006800, size 8, enabled pcib0: matched entry for 0.13.INTA pcib0: slot 13 INTA hardwired to IRQ 16 found-> vendor=0x1103, dev=0x0008, revid=0x07 bus=0, slot=13, func=0 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00006400, size 3, enabled map[14]: type 4, range 32, base 00006000, size 2, enabled map[18]: type 4, range 32, base 00005800, size 3, enabled map[1c]: type 4, range 32, base 00005400, size 2, enabled map[20]: type 4, range 32, base 00005000, size 8, enabled pcib0: matched entry for 0.13.INTA pcib0: slot 13 INTA hardwired to IRQ 16 found-> vendor=0x1103, dev=0x0008, revid=0x07 bus=0, slot=13, func=1 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00004800, size 3, enabled map[14]: type 4, range 32, base 00004400, size 2, enabled map[18]: type 4, range 32, base 00004000, size 3, enabled map[1c]: type 4, range 32, base 00003800, size 2, enabled map[20]: type 4, range 32, base 00003400, size 4, enabled map[24]: type 4, range 32, base 00003000, size 8, enabled pcib0: matched entry for 0.15.INTB pcib0: slot 15 INTB hardwired to IRQ 20 found-> vendor=0x1106, dev=0x3149, revid=0x80 bus=0, slot=15, func=0 class=01-04-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=20 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00002800, size 4, enabled pcib0: matched entry for 0.15.INTA pcib0: slot 15 INTA hardwired to IRQ 20 found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=20 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00002400, size 5, enabled pcib0: matched entry for 0.16.INTA pcib0: slot 16 INTA hardwired to IRQ 21 found-> vendor=0x1106, dev=0x3038, revid=0x81 bus=0, slot=16, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 00002000, size 5, enabled pcib0: matched entry for 0.16.INTA pcib0: slot 16 INTA hardwired to IRQ 21 found-> vendor=0x1106, dev=0x3038, revid=0x81 bus=0, slot=16, func=1 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.16.INTB pcib0: slot 16 INTB hardwired to IRQ 21 found-> vendor=0x1106, dev=0x3038, revid=0x81 bus=0, slot=16, func=2 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 00001400, size 5, enabled pcib0: matched entry for 0.16.INTB pcib0: slot 16 INTB hardwired to IRQ 21 found-> vendor=0x1106, dev=0x3038, revid=0x81 bus=0, slot=16, func=3 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ec000000, size 8, enabled pcib0: matched entry for 0.16.INTC pcib0: slot 16 INTC hardwired to IRQ 21 found-> vendor=0x1106, dev=0x3104, revid=0x86 bus=0, slot=16, func=4 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1106, dev=0x3227, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001000, size 8, enabled map[14]: type 1, range 32, base eb800000, size 8, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 23 found-> vendor=0x1106, dev=0x3065, revid=0x78 bus=0, slot=18, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0097, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns) intpin=a, irq=23 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00000800, size 8, enabled map[14]: type 1, range 32, base eb000000, size 8, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=0x10ec, dev=0x8169, revid=0x10 bus=0, slot=19, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=18 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000 agp0: allocating GATT for aperture of size 240M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xdfff pcib1: memory decode 0xee000000-0xefdfffff pcib1: prefetched decode 0xeff00000-0xf7ffffff ACPI PCI link initial configuration: pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base ee000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xee000000-0xeeffffff map[14]: type 3, range 32, base f0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xf0000000-0xf7ffffff pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x10de, dev=0x0150, revid=0xa3 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 powerspec 1 supports D0 D3 current D0 pci1: at device 0.0 (no driver attached) atapci0: port 0xb400-0xb4ff,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 irq 16 at device 10.0 on pci0 atapci0: Reserved 0x100 bytes for rid 0x20 type 4 at 0xb400 atapci0: [MPSAFE] ata2: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd400 ata2: reset tp1 mask=03 ostat0=50 ostat1=50 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=50 devices=0x3 ata2: [MPSAFE] ata3: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd000 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800 ata3: reset tp1 mask=03 ostat0=50 ostat1=50 ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=50 devices=0x3 ata3: [MPSAFE] atapci1: port 0x9800-0x98ff,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xb000-0xb007 irq 16 at device 10.1 on pci0 atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0x9800 atapci1: [MPSAFE] ata4: channel #0 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xb000 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xa800 ata4: reset tp1 mask=03 ostat0=50 ostat1=50 ata4-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata4-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 stat0=50 stat1=50 devices=0x3 ata4: [MPSAFE] ata5: channel #1 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xa400 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xa000 ata5: reset tp1 mask=03 ostat0=50 ostat1=50 ata5-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata5-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata5: reset tp2 stat0=50 stat1=50 devices=0x3 ata5: [MPSAFE] atapci2: port 0x8800-0x887f,0x9000-0x900f,0x9400-0x943f mem 0xed000000-0xed01ffff,0xed800000-0xed800fff irq 19 at device 11.0 on pci0 atapci2: failed: rid 0x20 is memory, requested 4 atapci2: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xed000000 atapci2: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xed800000 atapci2: [MPSAFE] ata6: channel #0 on atapci2 ata6: reset tp1 mask=03 ostat0=80 ostat1=80 ata6-master: stat=0x80 err=0x00 lsb=0x00 msb=0x00 ata6-master: stat=0x80 err=0x00 lsb=0x00 msb=0x00 ata6-master: stat=0x80 err=0x00 lsb=0x00 msb=0x00 ata6-master: stat=0x80 err=0x00 lsb=0x00 msb=0x00 ata6-master: stat=0x80 err=0x00 lsb=0x00 msb=0x00 ata6-master: stat=0x80 err=0x00 lsb=0x00 msb=0x00 ata6-master: stat=0x80 err=0x00 lsb=0x00 msb=0x00 ata6-master: stat=0x80 err=0x00 lsb=0x00 msb=0x00 ata6-master: stat=0x80 err=0x00 lsb=0x00 msb=0x00 ata6-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata6-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata6: reset tp2 stat0=50 stat1=00 devices=0x1 ata6: [MPSAFE] ata7: channel #1 on atapci2 ata7: reset tp1 mask=03 ostat0=80 ostat1=80 ata7-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata7-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata7: reset tp2 stat0=50 stat1=00 devices=0x1 ata7: [MPSAFE] ata8: channel #2 on atapci2 ata8: reset tp1 mask=03 ostat0=7f ostat1=7f ata8-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata8-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata8-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata8-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata8-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata8-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata8-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata8-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata8-slave: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata8: reset tp2 stat0=ff stat1=ff devices=0x0 ata8: [MPSAFE] ata9: channel #3 on atapci2 ata9: reset tp1 mask=03 ostat0=7f ostat1=7f ata9-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata9-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata9-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata9-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata9-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata9-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata9-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata9-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata9-slave: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata9: reset tp2 stat0=ff stat1=ff devices=0x0 ata9: [MPSAFE] ahc0: port 0x8400-0x84ff mem 0xec800000-0xec800fff irq 19 at device 12.0 on pci0 ahc0: Defaulting to MEMIO on ahc0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xec800000 ahc0: Reading SEEPROM...done. ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 423 instructions downloaded ahc0: Features 0x1def6, Bugs 0x40, Flags 0x20485560 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs atapci3: port 0x6800-0x68ff,0x7000-0x7003,0x7400-0x7407,0x7800-0x7803,0x8000-0x8007 irq 16 at device 13.0 on pci0 atapci3: Reserved 0x100 bytes for rid 0x20 type 4 at 0x6800 atapci3: [MPSAFE] ata10: channel #0 on atapci3 atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0x8000 atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0x7800 ata10: reset tp1 mask=03 ostat0=50 ostat1=50 ata10-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata10-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata10: reset tp2 stat0=50 stat1=50 devices=0x3 ata10: [MPSAFE] ata11: channel #1 on atapci3 atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0x7400 atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0x7000 ata11: reset tp1 mask=03 ostat0=50 ostat1=50 ata11-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata11-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata11: reset tp2 stat0=50 stat1=50 devices=0x3 ata11: [MPSAFE] atapci4: port 0x5000-0x50ff,0x5400-0x5403,0x5800-0x5807,0x6000-0x6003,0x6400-0x6407 irq 16 at device 13.1 on pci0 atapci4: Reserved 0x100 bytes for rid 0x20 type 4 at 0x5000 atapci4: [MPSAFE] ata12: channel #0 on atapci4 atapci4: Reserved 0x8 bytes for rid 0x10 type 4 at 0x6400 atapci4: Reserved 0x4 bytes for rid 0x14 type 4 at 0x6000 ata12: reset tp1 mask=03 ostat0=50 ostat1=50 ata12-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata12-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata12: reset tp2 stat0=50 stat1=50 devices=0x3 ata12: [MPSAFE] ata13: channel #1 on atapci4 atapci4: Reserved 0x8 bytes for rid 0x18 type 4 at 0x5800 atapci4: Reserved 0x4 bytes for rid 0x1c type 4 at 0x5400 ata13: reset tp1 mask=03 ostat0=50 ostat1=00 ata13-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata13-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata13: reset tp2 stat0=50 stat1=00 devices=0x1 ata13: [MPSAFE] atapci5: port 0x3000-0x30ff,0x3400-0x340f,0x3800-0x3803,0x4000-0x4007,0x4400-0x4403,0x4800-0x4807 irq 20 at device 15.0 on pci0 atapci5: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3400 atapci5: [MPSAFE] ata14: channel #0 on atapci5 atapci5: Reserved 0x8 bytes for rid 0x10 type 4 at 0x4800 atapci5: Reserved 0x4 bytes for rid 0x14 type 4 at 0x4400 ata14: reset tp1 mask=03 ostat0=7f ostat1=7f ata14-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata14-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata14-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata14-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata14-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata14-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata14-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata14-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata14-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata14: reset tp2 stat0=ff stat1=ff devices=0x0 ata14: [MPSAFE] ata15: channel #1 on atapci5 atapci5: Reserved 0x8 bytes for rid 0x18 type 4 at 0x4000 atapci5: Reserved 0x4 bytes for rid 0x1c type 4 at 0x3800 ata15: reset tp1 mask=03 ostat0=7f ostat1=7f ata15-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata15-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata15-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata15-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata15-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata15-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata15-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata15-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata15-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata15: reset tp2 stat0=ff stat1=ff devices=0x0 ata15: [MPSAFE] atapci6: port 0x2800-0x280f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 20 at device 15.1 on pci0 atapci6: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2800 ata0: channel #0 on atapci6 atapci6: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci6: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=50 devices=0x3 ata0: [MPSAFE] ata1: channel #1 on atapci6 atapci6: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci6: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=50 stat1=50 devices=0x3 ata1: [MPSAFE] uhci0: port 0x2400-0x241f irq 21 at device 16.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2400 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x2000-0x201f irq 21 at device 16.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2000 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1800-0x181f irq 21 at device 16.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x1400-0x141f irq 21 at device 16.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1400 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xec000000-0xec0000ff irq 21 at device 16.4 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xec000000 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 ehci_pci_attach: companion usb3 usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 vr0: port 0x1000-0x10ff mem 0xeb800000-0xeb8000ff irq 23 at device 18.0 on pci0 vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000 miibus0: on vr0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: bpf attached vr0: Ethernet address: 00:0e:a6:1f:29:1e vr0: [GIANT-LOCKED] re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x800 re0: port 0x800-0x8ff mem 0xeb000000-0xeb0000ff irq 18 at device 19.0 on pci0 miibus1: on re0 rgephy0: on miibus1 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto re0: bpf attached re0: Ethernet address: 00:50:fc:f8:c6:81 re0: [GIANT-LOCKED] fdc0: port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 unknown: not probed (disabled) unknown: not probed (disabled) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0xc041 0xc041 0xc041 0xc041 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcafff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xc041 0xc041 0xc041 0xc041 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1999783191 Hz quality 800 Timecounters tick every 1.000 msec DUMMYNET initialized (011031) ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging unlimited lo0: bpf attached ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on VIA 8237 chip ata0-master: setting UDMA100 on VIA 8237 chip ata0-slave: setting PIO4 on VIA 8237 chip ata0-slave: setting UDMA100 on VIA 8237 chip ad0: ATA-6 disk at ata0-master ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 120031478784 end 120031511039 ad1: ATA-6 disk at ata0-slave ad1: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ar: FreeBSD check1 failed GEOM: Configure ad0s1a, start 0 length 536870912 end 536870911 GEOM: Configure ad0s1b, start 536870912 length 536870912 end 1073741823 GEOM: Configure ad0s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad0s1d, start 1073741824 length 536870912 end 1610612735 GEOM: Configure ad0s1e, start 1610612736 length 536870912 end 2147483647 GEOM: Configure ad0s1f, start 2147483648 length 10737418240 end 12884901887 GEOM: Configure ad0s1g, start 12884901888 length 107146576896 end 120031478783 GEOM: new disk ad1 ata1-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata1-master: setting PIO4 on VIA 8237 chip ata1-master: setting UDMA100 on VIA 8237 chip ata1-slave: setting PIO4 on VIA 8237 chip ata1-slave: setting UDMA100 on VIA 8237 chip ad2: ATA-6 disk at ata1-master ad2: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA100 ar: FreeBSD check1 failed ad3: ATA-6 disk at ata1-slave ad3: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B ad3: 16 secs/int, 1 depth queue, UDMA100 ar: FreeBSD check1 failed ata2-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad1s1, start 32256 length 120031478784 end 120031511039 ata2-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin GEOM: new disk ad2 GEOM: new disk ad3 ata2-master: setting PIO4 on HighPoint chip GEOM: Configure ad1s1b, start 536870912 length 536870912 end 1073741823 GEOM: Configure ad1s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad1s1d, start 0 length 536870912 end 536870911 GEOM: Configure ad1s1e, start 1073741824 length 536870912 end 1610612735 GEOM: Configure ad1s1f, start 1610612736 length 536870912 end 2147483647 GEOM: Configure ad1s1g, start 2147483648 length 10737418240 end 12884901887 GEOM: Configure ad1s1h, start 12884901888 length 107146576896 end 120031478783 ata2-master: setting UDMA100 on HighPoint chip ata2-slave: setting PIO4 on HighPoint chip ata2-slave: setting UDMA100 on HighPoint chip [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad2s1, start 32256 length 123518997504 end 123519029759 ad4: ATA-6 disk at ata2-master ad4: 238475MB (488397168 sectors), 484521 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, UDMA100 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad3s1, start 32256 length 123518997504 end 123519029759 ad5: ATA-6 disk at ata2-slave ad5: 238475MB (488397168 sectors), 484521 C, 16 H, 63 S, 512 B ad5: 16 secs/int, 1 depth queue, UDMA100 ata3-slave: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ata3-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ata3-master: setting PIO4 on HighPoint chip ata3-master: setting UDMA133 on HighPoint chip ata3-slave: setting PIO4 on HighPoint chip ata3-slave: setting UDMA133 on HighPoint chip ad6: ATA-7 disk at ata3-master ad6: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B ad6: 16 secs/int, 1 depth queue, UDMA133 GEOM: Configure ad2s1c, start 0 length 123518997504 end 123518997503 GEOM: Configure ad2s1e, start 0 length 123518997504 end 123518997503 GEOM: new disk ad4 GEOM: Configure ad3s1c, start 0 length 123518997504 end 123518997503 GEOM: Configure ad3s1e, start 0 length 123518997504 end 123518997503 GEOM: new disk ad5 GEOM: new disk ad6 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:976784067 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad4s1, start 32256 length 500113442304 end 500113474559 ad7: ATA-7 disk at ata3-slave ad7: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B ad7: 16 secs/int, 1 depth queue, UDMA133 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:488392002 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad5s1, start 32256 length 250056705024 end 250056737279 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:980462952 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad6s1, start 32256 length 501997031424 end 501997063679 ata4-slave: pio=0x0c wdma=0x22 udma=0x46 cable=80pin GEOM: Configure ad4s1c, start 0 length 500113442304 end 500113442303 GEOM: Configure ad4s1d, start 0 length 500113442304 end 500113442303 GEOM: new disk ad7 ata4-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ata4-master: setting PIO4 on HighPoint chip ata4-master: setting UDMA133 on HighPoint chip GEOM: Configure ad6s1c, start 0 length 501997031424 end 501997031423 GEOM: Configure ad6s1d, start 0 length 501997031424 end 501997031423 ata4-slave: setting PIO4 on HighPoint chip ata4-slave: setting UDMA133 on HighPoint chip ad8: ATA-7 disk at ata4-master ad8: 194481MB (398297088 sectors), 395136 C, 16 H, 63 S, 512 B ad8: 16 secs/int, 1 depth queue, UDMA133 GEOM: new disk ad8 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/7/63 s:63 l:398283417 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad8s1, start 32256 length 203921109504 end 203921141759 ad9: ATA-7 disk at ata4-slave ad9: 194481MB (398297088 sectors), 395136 C, 16 H, 63 S, 512 B ad9: 16 secs/int, 1 depth queue, UDMA133 GEOM: Configure ad8s1c, start 0 length 203921109504 end 203921109503 GEOM: Configure ad8s1d, start 0 length 203921109504 end 203921109503 GEOM: new disk ad9 ata5-slave: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ata5-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:796582962 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad9s1, start 32256 length 407850476544 end 407850508799 ata5-master: setting PIO4 on HighPoint chip ata5-master: setting UDMA133 on HighPoint chip ata5-slave: setting PIO4 on HighPoint chip ata5-slave: setting UDMA133 on HighPoint chip GEOM: Configure ad9s1c, start 0 length 407850476544 end 407850476543 GEOM: Configure ad9s1d, start 0 length 407850476544 end 407850476543 ad10: ATA-7 disk at ata5-master ad10: 194481MB (398297088 sectors), 395136 C, 16 H, 63 S, 512 B ad10: 16 secs/int, 1 depth queue, UDMA133 GEOM: new disk ad10 ar: HighPoint check1 failed [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/7/63 s:63 l:398283417 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad10s1, start 32256 length 203921109504 end 203921141759 ad11: ATA-7 disk at ata5-slave ad11: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B ad11: 16 secs/int, 1 depth queue, UDMA133 ar: HighPoint check1 failed GEOM: Configure ad10s1c, start 0 length 203921109504 end 203921109503 GEOM: Configure ad10s1d, start 0 length 203921109504 end 203921109503 GEOM: new disk ad11 ata6-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad11s1, start 32256 length 250994386944 end 250994419199 ad12: ATA-7 disk at ata6-master ad12: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B ad12: 16 secs/int, 1 depth queue, UDMA133 GEOM: Configure ad11s1c, start 0 length 250994386944 end 250994386943 GEOM: Configure ad11s1d, start 0 length 250994386944 end 250994386943 GEOM: new disk ad12 ar: Promise check1 failed ata7-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad14: ATA-6 disk at ata7-master ad14: 238475MB (488397168 sectors), 484521 C, 16 H, 63 S, 512 B ad14: 16 secs/int, 1 depth queue, UDMA100 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad12s1, start 32256 length 250994386944 end 250994419199 ar: Promise check1 failed GEOM: new disk ad14 ata10-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin GEOM: Configure ad12s1c, start 0 length 250994386944 end 250994386943 GEOM: Configure ad12s1d, start 0 length 250994386944 end 250994386943 ata10-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata10-master: setting PIO4 on HighPoint chip ata10-master: setting UDMA100 on HighPoint chip ata10-slave: setting PIO4 on HighPoint chip [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:488392002 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad14s1, start 32256 length 250056705024 end 250056737279 ata10-slave: setting UDMA100 on HighPoint chip GEOM: Configure ad14a, start 8192 length 500118627328 end 500118635519 GEOM: Configure ad14c, start 0 length 500118635520 end 500118635519 GEOM: Configure ad14s1c, start 0 length 250056705024 end 250056705023 GEOM: Configure ad14s1d, start 0 length 250056705024 end 250056705023 ad20: ATA-6 disk at ata10-master ad20: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B ad20: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad20 ar: HighPoint check1 failed [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad20s1, start 32256 length 123518997504 end 123519029759 ad21: ATA-6 disk at ata10-slave ad21: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B ad21: 16 secs/int, 1 depth queue, UDMA100 ar: HighPoint check1 failed GEOM: Configure ad20s1c, start 0 length 123518997504 end 123518997503 GEOM: Configure ad20s1e, start 0 length 123518997504 end 123518997503 GEOM: new disk ad21 ata11-slave: pio=0x0c wdma=0x22 udma=0x46 cable=80pin [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad21s1, start 32256 length 123518997504 end 123519029759 ata11-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ata11-master: setting PIO4 on HighPoint chip ata11-master: setting UDMA133 on HighPoint chip GEOM: Configure ad21s1c, start 0 length 123518997504 end 123518997503 GEOM: Configure ad21s1e, start 0 length 123518997504 end 123518997503 ata11-slave: setting PIO4 on HighPoint chip ata11-slave: setting UDMA133 on HighPoint chip ad22: ATA-7 disk at ata11-master ad22: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B ad22: 16 secs/int, 1 depth queue, UDMA133 GEOM: new disk ad22 ar: HighPoint check1 failed [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:240107427 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad22s1, start 32256 length 122935002624 end 122935034879 ad23: ATA-7 disk at ata11-slave ad23: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B ad23: 16 secs/int, 1 depth queue, UDMA133 GEOM: Configure ad22s1c, start 0 length 122935002624 end 122935002623 GEOM: Configure ad22s1e, start 0 length 122935002624 end 122935002623 GEOM: new disk ad23 ata12-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:468873027 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad23s1, start 32256 length 240062989824 end 240063022079 ata12-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin GEOM: Configure ad23s1c, start 0 length 240062989824 end 240062989823 GEOM: Configure ad23s1d, start 0 length 240062989824 end 240062989823 ata12-master: setting PIO4 on HighPoint chip ata12-master: setting UDMA100 on HighPoint chip ata12-slave: setting PIO4 on HighPoint chip ata12-slave: setting UDMA100 on HighPoint chip ad24: ATA-6 disk at ata12-master ad24: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad24: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad24 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad24s1, start 32256 length 120031478784 end 120031511039 ad25: ATA-6 disk at ata12-slave ad25: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B ad25: 16 secs/int, 1 depth queue, UDMA100 ar: HighPoint check1 failed GEOM: new disk ad25 ata13-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad25s1, start 32256 length 123518997504 end 123519029759 ata13-master: setting PIO4 on HighPoint chip ata13-master: setting UDMA66 on HighPoint chip GEOM: Configure ad25s1c, start 0 length 123518997504 end 123518997503 GEOM: Configure ad25s1d, start 0 length 123518997504 end 123518997503 ad26: ATA-5 disk at ata13-master ad26: 26059MB (53369568 sectors), 52946 C, 16 H, 63 S, 512 B ad26: 16 secs/int, 1 depth queue, UDMA66 GEOM: new disk ad26 ar: HighPoint check1 failed lun 0 magic_0 0x411cf9f2 magic_1 0x00000000 flags 0x40102 40102 total_disks 2 generation 0 width 2 heads 255 sectors 63 cylinders 60802 total_sectors 976794336 interleave 128 reserved 10 offset 10 disk 0: flags = 0x0b b ad4 sectors 488397168 disk 1: flags = 0x0b b ad5 sectors 488397168 ar0: 476950MB [60802/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad5 at ata2-slave lun 1 magic_0 0x4100e31f magic_1 0x00000000 flags 0x40102 40102 total_disks 2 generation 0 width 2 heads 255 sectors 63 cylinders 61031 total_sectors 980469504 interleave 128 reserved 10 offset 10 disk 0: flags = 0x0b b ad6 sectors 490234752 disk 1: flags = 0x0b b ad7 sectors 490234752 ar1: 478744MB [61031/255/63] status: READY subdisks: disk0 READY on ad6 at ata3-master disk1 READY on ad7 at ata3-slave lun 2 magic_0 0x4100e40c magic_1 0x00000000 flags 0x40102 40102 total_disks 2 generation 0 width 2 heads 255 sectors 63 cylinders 49585 total_sectors 796594176 interleave 128 reserved 10 offset 10 disk 0: flags = 0x0b b ad9 sectors 398297088 disk 1: flags = 0x0b b ad8 sectors 398297088 ar2: 388962MB [49585/255/63] status: READY subdisks: disk0 READY on ad9 at ata4-slave disk1 READY on ad8 at ata4-master lun 3 magic_0 0x4100e468 magic_1 0x00000000 flags 0x40102 40102 total_disks 2 generation 0 width 2 heads 255 sectors 63 cylinders 29186 total_sectors 468883296 interleave 128 reserved 10 offset 10 disk 0: flags = 0x0b b ad23 sectors 234441648 disk 1: flags = 0x0b b ad24 sectors 234441648 ar3: 228946MB [29186/255/63] status: READY subdisks: disk0 READY on ad23 at ata11-slave disk1 READY on ad24 at ata12-master Waiting 5 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:53367867 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad26s1, start 32256 length 27324347904 end 27324380159 GEOM: new disk ar0 GEOM: new disk ar1 GEOM: new disk ar2 GEOM: new disk ar3 GEOM: Configure ad26s1c, start 0 length 27324347904 end 27324347903 GEOM: Configure ad26s1d, start 0 length 27324347904 end 27324347903 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:976784067 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ar0s1, start 32256 length 500113442304 end 500113474559 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:980462952 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ar1s1, start 32256 length 501997031424 end 501997063679 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:796582962 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ar2s1, start 32256 length 407850476544 end 407850508799 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:468873027 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ar3s1, start 32256 length 240062989824 end 240063022079 GEOM: Configure ar0s1c, start 0 length 500113442304 end 500113442303 GEOM: Configure ar0s1d, start 0 length 500113442304 end 500113442303 GEOM: Configure ar1s1c, start 0 length 501997031424 end 501997031423 GEOM: Configure ar1s1d, start 0 length 501997031424 end 501997031423 GEOM: Configure ar2s1c, start 0 length 407850476544 end 407850476543 GEOM: Configure ar2s1d, start 0 length 407850476544 end 407850476543 GEOM: Configure ar3s1c, start 0 length 240062989824 end 240062989823 GEOM: Configure ar3s1d, start 0 length 240062989824 end 240062989823 ahc0: Selection Timeout on A:0. 0 SCBs aborted ahc0: Selection Timeout on A:1. 0 SCBs aborted ahc0: Selection Timeout on A:4. 0 SCBs aborted ahc0: Selection Timeout on A:8. 0 SCBs aborted ahc0: Selection Timeout on A:9. 0 SCBs aborted ahc0: Selection Timeout on A:15. 0 SCBs aborted ahc0: Selection Timeout on A:2. 0 SCBs aborted ahc0: Selection Timeout on A:3. 0 SCBs aborted ahc0: Selection Timeout on A:6. 0 SCBs aborted ahc0: Selection Timeout on A:14. 0 SCBs aborted (ahc0:A:5:0): Sending SDTR period c, offset 7f (ahc0:A:5:0): Received SDTR period 19, offset f Filtered to period 19, offset f ahc0: target 5 synchronous at 10.0MHz, offset = 0xf (probe11:ahc0:0:12:0): Retrying Command (ahc0:A:5:0): Sending SDTR period 19, offset f (probe12:ahc0:0:13:0): Retrying Command (probe9:ahc0:0:10:0): Retrying Command (probe10:ahc0:0:11:0): Retrying Command (ahc0:A:5:0): Received SDTR period 19, offset f Filtered to period 19, offset f (ahc0:A:12:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 (ahc0:A:12:0): Received PPR width 1, period 9, offset 3f,options 2 Filtered to width 1, period 9, offset 3f, options 2 ahc0: target 12 using 16bit transfers ahc0: target 12 synchronous at 80.0MHz DT, offset = 0x3f (ahc0:A:13:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 (ahc0:A:13:0): Received PPR width 1, period 9, offset 3f,options 2 Filtered to width 1, period 9, offset 3f, options 2 ahc0: target 13 using 16bit transfers ahc0: target 13 synchronous at 80.0MHz DT, offset = 0x3f (ahc0:A:10:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 (ahc0:A:10:0): Received PPR width 1, period 9, offset 3f,options 2 Filtered to width 1, period 9, offset 3f, options 2 ahc0: target 10 using 16bit transfers ahc0: target 10 synchronous at 80.0MHz DT, offset = 0x3f (ahc0:A:11:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 (ahc0:A:11:0): Received PPR width 1, period 9, offset 3f,options 2 Filtered to width 1, period 9, offset 3f, options 2 ahc0: target 11 using 16bit transfers ahc0: target 11 synchronous at 80.0MHz DT, offset = 0x3f pass0 at ahc0 bus 0 target 5 lun 0 pass0: Removable Sequential Access SCSI-2 device pass0: Serial Number pass0: 10.000MB/s transfers (10.000MHz, offset 15) pass1 at ahc0 bus 0 target 10 lun 0 pass1: Fixed Direct Access SCSI-3 device pass1: Serial Number TFF8Y198 pass1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled pass2 at ahc0 bus 0 target 11 lun 0 pass2: Fixed Direct Access SCSI-3 device pass2: Serial Number VM9B1477 pass2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled pass3 at ahc0 bus 0 target 12 lun 0 pass3: Fixed Direct Access SCSI-3 device pass3: Serial Number TFF8X930 pass3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled pass4 at ahc0 bus 0 target 13 lun 0 pass4: Fixed Direct Access SCSI-3 device pass4: Serial Number VFLA9712 pass4: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled sa0 at ahc0 bus 0 target 5 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: Serial Number sa0: 10.000MB/s transfers (10.000MHz, offset 15) da0 at ahc0 bus 0 target 10 lun 0 da0: Fixed Direct Access SCSI-3 device da0: Serial Number TFF8Y198 da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) da1 at ahc0 bus 0 target 11 lun 0 da1: Fixed Direct Access SCSI-3 device da1: Serial Number VM9B1477 da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) da2 at ahc0 bus 0 target 12 lun 0 da2: Fixed Direct Access SCSI-3 device da2: Serial Number TFF8X930 da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) da3 at ahc0 bus 0 target 13 lun 0 da3: Fixed Direct Access SCSI-3 device da3: Serial Number VFLA9712 da3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da3: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) GEOM: new disk da0 GEOM: new disk da1 GEOM: new disk da2 GEOM: new disk da3 ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 2 (ISA IRQ 0) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71681967 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 36701167104 end 36701199359 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71681967 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da1s1, start 32256 length 36701167104 end 36701199359 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71681967 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da2s1, start 32256 length 36701167104 end 36701199359 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71681967 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da3s1, start 32256 length 36701167104 end 36701199359 GEOM: Configure da0s1c, start 0 length 36701167104 end 36701167103 GEOM: Configure da0s1d, start 0 length 36701167104 end 36701167103 GEOM: Configure da1s1c, start 0 length 36701167104 end 36701167103 GEOM: Configure da1s1d, start 0 length 36701167104 end 36701167103 GEOM: Configure da2s1c, start 0 length 36701167104 end 36701167103 GEOM: Configure da2s1d, start 0 length 36701167104 end 36701167103 GEOM: Configure da3s1c, start 0 length 36701167104 end 36701167103 GEOM: Configure da3s1d, start 0 length 36701167104 end 36701167103 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init Enter full pathname of shell or RETURN for /bin/sh: