Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-CAGLE #0: Wed Apr 14 03:02:00 GMT 2004
    root@:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e3000.
MPTable: <COMPAQ               >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2660.19-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 528482304 (504 MB)
avail memory = 503689216 (480 MB)
ioapic0: Changing APIC ID to 1
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.20
Using $PIR table, 5 entries at 0xc00ec510
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: slot 2 INTA routed to irq 16
pcib0: slot 29 INTA routed to irq 16
pcib0: slot 29 INTB routed to irq 19
pcib0: slot 29 INTC routed to irq 18
pcib0: slot 29 INTD routed to irq 23
pcib0: slot 31 INTA routed to irq 18
pcib0: slot 31 INTA routed to irq 18
pcib0: slot 31 INTB routed to irq 17
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0x14e0-0x14e7 mem 0xf8400000-0xf847ffff,0xf0000000-0xf7ffffff irq 16 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1440-0x145f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1460-0x147f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1480-0x149f irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhub3: Silitek Generic USB Hub, class 9/0, rev 1.10/1.00, addr 3
uhub3: 3 ports with 2 removable, bus powered
ukbd0: Silitek USB Hub/Keyboard, rev 1.10/1.00, addr 4, iclass 3/1
kbd0 at ukbd0
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci5: <PCI bus> on pcib1
pcib1: slot 2 INTA routed to irq 20
bge0: <Broadcom BCM5782 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xf8500000-0xf850ffff irq 20 at device 2.0 on pci5
bge0: Ethernet address: 00:40:ca:8e:3b:69
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x14c0-0x14cf,0x180c-0x180f,0x14f0-0x14f7,0x1808-0x180b,0x14e8-0x14ef irq 18 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port 0x14d0-0x14df,0x1814-0x1817,0x1800-0x1807,0x1810-0x1813,0x14f8-0x14ff irq 18 at device 31.2 on pci0
atapci1: [MPSAFE]
ata2: at 0x14f8 on atapci1
ata2: [MPSAFE]
ata3: at 0x1800 on atapci1
ata3: [MPSAFE]
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pnpbios: error 0/82 getting device count/size limit
orm0: <Option ROMs> at iomem 0xca000-0xcbfff,0xc0000-0xc9fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2660188284 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc4825760
ad0: 19092MB <ST320414A> [38792/16/63] at ata0-master UDMA100
acd0: CDROM <Compaq CRN-8245B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks, buffers remaining... 1 1 
done
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-CAGLE #0: Wed Apr 14 03:02:00 GMT 2004
    root@:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e3000.
MPTable: <COMPAQ               >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2660.19-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 528482304 (504 MB)
avail memory = 503689216 (480 MB)
ioapic0: Changing APIC ID to 1
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.20
Using $PIR table, 5 entries at 0xc00ec510
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: slot 2 INTA routed to irq 16
pcib0: slot 29 INTA routed to irq 16
pcib0: slot 29 INTB routed to irq 19
pcib0: slot 29 INTC routed to irq 18
pcib0: slot 29 INTD routed to irq 23
pcib0: slot 31 INTA routed to irq 18
pcib0: slot 31 INTA routed to irq 18
pcib0: slot 31 INTB routed to irq 17
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0x14e0-0x14e7 mem 0xf8400000-0xf847ffff,0xf0000000-0xf7ffffff irq 16 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1440-0x145f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1460-0x147f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1480-0x149f irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhub3: Silitek Generic USB Hub, class 9/0, rev 1.10/1.00, addr 3
uhub3: 3 ports with 2 removable, bus powered
ukbd0: Silitek USB Hub/Keyboard, rev 1.10/1.00, addr 4, iclass 3/1
kbd0 at ukbd0
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci5: <PCI bus> on pcib1
pcib1: slot 2 INTA routed to irq 20
bge0: <Broadcom BCM5782 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xf8500000-0xf850ffff irq 20 at device 2.0 on pci5
bge0: Ethernet address: 00:40:ca:8e:3b:69
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x14c0-0x14cf,0x180c-0x180f,0x14f0-0x14f7,0x1808-0x180b,0x14e8-0x14ef irq 18 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port 0x14d0-0x14df,0x1814-0x1817,0x1800-0x1807,0x1810-0x1813,0x14f8-0x14ff irq 18 at device 31.2 on pci0
atapci1: [MPSAFE]
ata2: at 0x14f8 on atapci1
ata2: [MPSAFE]
ata3: at 0x1800 on atapci1
ata3: [MPSAFE]
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pnpbios: error 0/82 getting device count/size limit
orm0: <Option ROMs> at iomem 0xca000-0xcbfff,0xc0000-0xc9fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2660187432 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc4825760
ad0: 19092MB <ST320414A> [38792/16/63] at ata0-master UDMA100
acd0: CDROM <Compaq CRN-8245B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a