Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA3 #1: Wed Sep 8 18:54:01 EDT 2004 mdtancsa@releng-5-pioneer.sentex.ca:/usr/obj/usr/src/sys/pioneer Preloaded elf kernel "/boot/kernel/kernel" at 0xc082c000. Preloaded elf module "/boot/modules/acpi.ko" at 0xc082c1d8. Calibrating clock(s) ... i8254 clock: 1193179 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1002280114 Hz CPU: VIA C3 Nehemiah (1002.28-MHz 686-class CPU) Origin = "CentaurHauls" Id = 0x691 Stepping = 1 Features=0x380b035 real memory = 251592704 (239 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000000eb87fff, 234233856 bytes (57186 pages) avail memory = 236654592 (225 MB) bios32: Found BIOS32 Service Directory header at 0xc00fab90 bios32: Entry = 0xfb000 (c00fb000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb050 pnpbios: Found PnP BIOS data at 0xc00fba50 pnpbios: Entry = f0000:ba80 Rev = 1.0 Other BIOS signatures found: null: random: ichwd module loaded io: mem: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31231106) pcibios: BIOS version 2.10 Found $PIR table, 7 entries at 0xc00fdeb0 PCI-Only Interrupts: 7 11 12 15 Location Bus Device Pin Link IRQs slot 1 0 20 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 20 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 20 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 1 0 20 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 2 0 19 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 19 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 2 0 19 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 0 19 D 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 16 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 16 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 16 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 16 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 17 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 17 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 18 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 15 A 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 15 B 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 15 C 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 15 D 0x03 3 4 5 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 10 func 0 AcpiOsDerivePciId: bus 0 dev 10 func 1 AcpiOsDerivePciId: bus 0 dev 17 func 0 acpi0: Power Button (fixed) ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 unknown: not probed (disabled) cpu0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.20.0 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 7+ low,level,sharable 0.20.1 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 15+ low,level,sharable 0.20.2 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.20.3 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 15+ low,level,sharable 0.19.0 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.19.1 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.19.2 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 7+ low,level,sharable 0.19.3 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.16.0 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.16.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 7+ low,level,sharable 0.16.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 15+ low,level,sharable 0.16.3 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.17.0 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 7+ low,level,sharable 0.17.2 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.18.0 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 15+ low,level,sharable 0.15.0 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.15.1 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.15.2 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 7+ low,level,sharable 0.15.3 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e6000000, size 22, enabled found-> vendor=0x1106, dev=0x3123, revid=0x00 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0xb091, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000d000, size 8, enabled map[14]: type 1, range 32, base e6400000, size 8, enabled pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.LNKD) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKA (references 6, priority 123894): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 190 190 240 5190 5190 5190 5190 5190 50190 50190100190 \\_SB_.PCI0.LNKC (references 5, priority 103245): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 190 190 240 5190 5190 5190 5190 5190 50190 50190100190 \\_SB_.PCI0.LNKB (references 4, priority 82596): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 190 190 240 5190 5190 5190 5190 5190 50190 50190100190 \\_SB_.PCI0.LNKD (references 4, priority 82596): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 190 190 240 5190 5190 5190 5190 5190 50190 50190100190 pcib0: slot 15 INTA routed to irq 15 via \\_SB_.PCI0.LNKD found-> vendor=0x1106, dev=0x3106, revid=0x8b bus=0, slot=15, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns) intpin=a, irq=15 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000d400, size 5, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.LNKA) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKA (references 6, priority 125056): interrupts: 11 10 5 12 7 6 4 3 14 15 1 penalty: 380 380 430 5380 5380 5380 5380 5380 50380 50420100380 \\_SB_.PCI0.LNKC (references 5, priority 104213): interrupts: 11 10 5 12 7 6 4 3 14 15 1 penalty: 380 380 430 5380 5380 5380 5380 5380 50380 50420100380 \\_SB_.PCI0.LNKB (references 4, priority 83370): interrupts: 11 10 5 12 7 6 4 3 14 15 1 penalty: 380 380 430 5380 5380 5380 5380 5380 50380 50420100380 pcib0: slot 16 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000d800, size 5, enabled pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LNKB) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKC (references 5, priority 105190): interrupts: 10 5 11 12 7 6 4 3 14 15 1 penalty: 570 620 630 5570 5570 5570 5570 5570 50570 50610100570 \\_SB_.PCI0.LNKB (references 4, priority 84152): interrupts: 10 5 11 12 7 6 4 3 14 15 1 penalty: 570 620 630 5570 5570 5570 5570 5570 50570 50610100570 pcib0: slot 16 INTB routed to irq 12 via \\_SB_.PCI0.LNKB found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=1 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000dc00, size 5, enabled pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.LNKC) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKC (references 5, priority 106159): interrupts: 10 5 11 7 6 4 3 12 14 15 1 penalty: 760 810 820 5760 5760 5760 5760 5800 50760 50800100760 pcib0: slot 16 INTC routed to irq 7 via \\_SB_.PCI0.LNKC found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=2 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e6401000, size 8, enabled pcib0: matched entry for 0.16.INTD (src \\_SB_.PCI0.LNKD) pcib0: slot 16 INTD is already routed to irq 15 found-> vendor=0x1106, dev=0x3104, revid=0x82 bus=0, slot=16, func=3 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=15 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1106, dev=0x3177, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000e000, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=17, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000e400, size 8, enabled map[14]: type 1, range 32, base e6402000, size 8, enabled pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.LNKA) pcib0: slot 18 INTA is already routed to irq 11 found-> vendor=0x1106, dev=0x3065, revid=0x74 bus=0, slot=18, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 3, enabled pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.LNKB) pcib0: slot 20 INTA is already routed to irq 12 found-> vendor=0x151f, dev=0x0000, revid=0x00 bus=0, slot=20, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=12 agp0: mem 0xe6000000-0xe63fffff at device 0.0 on pci0 agp0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xe6000000 agp0: allocating GATT for aperture of size 228M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xe4000000-0xe5ffffff pcib1: prefetched decode 0xe0000000-0xe3ffffff ACPI PCI link initial configuration: \\_SB_.PCI0.LNKA irq*11: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 1.0.0 \\_SB_.PCI0.LNKB irq*12: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 1.0.1 \\_SB_.PCI0.LNKC irq* 7: [ 1 3 4 5 6 7 10 11 12 14 15] 7+ low,level,sharable 1.0.2 \\_SB_.PCI0.LNKD irq*15: [ 1 3 4 5 6 7 10 11 12 14 15] 15+ low,level,sharable 1.0.3 pci1: on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e0000000, size 26, enabled pcib1: device (null) requested decoded memory range 0xe0000000-0xe3ffffff map[14]: type 1, range 32, base e4000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xe4000000-0xe4ffffff pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA) pcib1: slot 0 INTA is already routed to irq 11 found-> vendor=0x1106, dev=0x3122, revid=0x03 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: at device 0.0 (no driver attached) vr0: port 0xd000-0xd0ff mem 0xe6400000-0xe64000ff irq 15 at device 15.0 on pci0 vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000 miibus0: on vr0 ukphy0: on miibus0 ukphy0: OUI 0x004063, model 0x0034, rev. 9 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: bpf attached vr0: Ethernet address: 00:40:63:c9:fa:99 vr0: [MPSAFE] uhci0: port 0xd400-0xd41f irq 11 at device 16.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xd800-0xd81f irq 12 at device 16.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhid0: APC Back-UPS ES 500 FW:801.e5.D USB FW:e5, rev 1.10/1.06, addr 2, iclass 3/0 uhci2: port 0xdc00-0xdc1f irq 7 at device 16.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 16.3 (no driver attached) isab0: at device 17.0 on pci0 isa0: on isab0 atapci0: port 0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] vr1: port 0xe400-0xe4ff mem 0xe6402000-0xe64020ff irq 11 at device 18.0 on pci0 vr1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400 miibus1: on vr1 ukphy1: on miibus1 ukphy1: OUI 0x004063, model 0x0032, rev. 5 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr1: bpf attached vr1: Ethernet address: 00:40:63:c9:fa:98 vr1: [MPSAFE] sio0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe800 sio0: irq maps: 0x1 0x1001 0x1 0x1 sio0: port 0xe800-0xe807 irq 12 at device 20.0 on pci0 sio0: moving to sio4 sio4: type 16550A fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 sio0: irq maps: 0x1 0x11 0x1 0x1 can't re-use a leaf (%desc)! can't re-use a leaf (%driver)! can't re-use a leaf (%location)! can't re-use a leaf (%pnpinfo)! can't re-use a leaf (%parent)! sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ unknown: not probed (disabled) sio2: irq maps: 0x1 0x21 0x1 0x1 sio2 port 0x3e8-0x3ef irq 5 on acpi0 sio2: type 16550A sio3: irq maps: 0x1 0x401 0x1 0x1 sio3 port 0x2e8-0x2ef irq 10 on acpi0 sio3: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it sio: sio2 already exists; skipping it sio: sio3 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcdfff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c ee 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 6e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c ee 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1002280114 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to accept, logging limited to 2100 packets/entry by default lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on VIA 8235 chip ata0-master: setting UDMA100 on VIA 8235 chip ad0: ATA-6 disk at ata0-master ad0: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 40015954944 end 40015987199 GEOM: Configure ad0s1a, start 0 length 524288000 end 524287999 GEOM: Configure ad0s1b, start 524288000 length 1073741824 end 1598029823 GEOM: Configure ad0s1c, start 0 length 40015954944 end 40015954943 GEOM: Configure ad0s1d, start 1598029824 length 2147483648 end 3745513471 GEOM: Configure ad0s1e, start 3745513472 length 21474836480 end 25220349951 GEOM: Configure ad0s1f, start 25220349952 length 14795604992 end 40015954943 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init