Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc09e3000. MP Configuration Table version 1.4 found at 0xc009e560 APIC: Using the MPTable enumerator. SMP: Added CPU 1 (BSP) SMP: Added CPU 0 (AP) MPTable: Calibrating clock(s) ... i8254 clock: 1193192 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 300012435 Hz CPU: Pentium II/Pentium II Xeon/Celeron (300.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x634 Stepping = 4 Features=0x80fbff real memory = 134217728 (128 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x0000000007d99fff, 118951936 bytes (29041 pages) avail memory = 120754176 (115 MB) APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 bios32: Found BIOS32 Service Directory header at 0xc00f77c0 bios32: Entry = 0xfd77d (c00fd77d) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd710+0x289 pnpbios: Found PnP BIOS data at 0xc00f77f0 pnpbios: Entry = f0000:b6ee Rev = 1.0 Other BIOS signatures found: ioapic0: Assuming intbase of 0 ioapic0: intpin 0 -> ExtINT (edge, activehi) ioapic0: intpin 1 -> irq 1 (edge, activehi) ioapic0: intpin 2 -> irq 2 (edge, activehi) ioapic0: intpin 3 -> irq 3 (edge, activehi) ioapic0: intpin 4 -> irq 4 (edge, activehi) ioapic0: intpin 5 -> irq 5 (edge, activehi) ioapic0: intpin 6 -> irq 6 (edge, activehi) ioapic0: intpin 7 -> irq 7 (edge, activehi) ioapic0: intpin 8 -> irq 8 (edge, activehi) ioapic0: intpin 9 -> irq 9 (edge, activehi) ioapic0: intpin 10 -> irq 10 (edge, activehi) ioapic0: intpin 11 -> irq 11 (edge, activehi) ioapic0: intpin 12 -> irq 12 (edge, activehi) ioapic0: intpin 13 -> irq 13 (edge, activehi) ioapic0: intpin 14 -> irq 14 (edge, activehi) ioapic0: intpin 15 -> irq 15 (edge, activehi) ioapic0: intpin 16 -> irq 16 (level, activelo) ioapic0: intpin 17 -> irq 17 (level, activelo) ioapic0: intpin 18 -> irq 18 (level, activelo) ioapic0: intpin 19 -> irq 19 (level, activelo) ioapic0: intpin 20 -> irq 20 (level, activelo) ioapic0: intpin 21 -> irq 21 (level, activelo) ioapic0: intpin 22 -> irq 22 (level, activelo) ioapic0: intpin 23 -> irq 23 (level, activelo) ioapic0: intpin 1 trigger: edge ioapic0: intpin 1 polarity: active-hi ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: active-hi ioapic0: intpin 3 trigger: edge ioapic0: intpin 3 polarity: active-hi ioapic0: intpin 4 trigger: edge ioapic0: intpin 4 polarity: active-hi ioapic0: intpin 5 trigger: edge ioapic0: intpin 5 polarity: active-hi ioapic0: intpin 6 trigger: edge ioapic0: intpin 6 polarity: active-hi ioapic0: intpin 7 trigger: edge ioapic0: intpin 7 polarity: active-hi ioapic0: intpin 8 trigger: edge ioapic0: intpin 8 polarity: active-hi ioapic0: intpin 16 trigger: level ioapic0: intpin 16 polarity: active-lo ioapic0: intpin 19 trigger: level ioapic0: intpin 19 polarity: active-lo ioapic0: intpin 11 trigger: edge ioapic0: intpin 11 polarity: active-hi ioapic0: intpin 12 trigger: edge ioapic0: intpin 12 polarity: active-hi ioapic0: intpin 13 trigger: edge ioapic0: intpin 13 polarity: active-hi ioapic0: intpin 14 trigger: edge ioapic0: intpin 14 polarity: active-hi ioapic0: intpin 15 trigger: edge ioapic0: intpin 15 polarity: active-hi ioapic0: intpin 19 trigger: level ioapic0: intpin 19 polarity: active-lo ioapic0: intpin 18 trigger: level ioapic0: intpin 18 polarity: active-lo ioapic0: intpin 16 trigger: level ioapic0: intpin 16 polarity: active-lo ioapic0: intpin 18 trigger: level ioapic0: intpin 18 polarity: active-lo lapic: Routing ExtINT -> LINT0 lapic: LINT0 trigger: edge lapic: LINT0 polarity: active-hi lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: active-hi ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> null: random: mem: Pentium Pro MTRR support enabled npx0: [FAST] npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80003b90 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71808086) pcibios: BIOS version 2.10 Using $PIR table, 10 entries at 0xc00fdf20 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 1 0 16 A 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 16 B 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 16 C 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 16 D 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 17 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 17 B 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 17 C 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 17 D 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 3 0 18 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 3 0 18 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 3 0 18 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 3 0 18 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 4 0 19 A 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 4 0 19 B 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 4 0 19 C 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 4 0 19 D 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 33 1 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 33 1 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 8 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 9 A 0x63 3 4 5 6 7 9 10 11 12 14 15 pcib0: at pcibus 0 on motherboard pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x8086, dev=0x7180, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7181, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x000f, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x01 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fcb0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fce0, size 5, enabled pcib0: slot 7 INTD routed to irq 19 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=19 map[90]: type 4, range 32, base 00008800, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x01 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000f800, size 8, enabled map[14]: type 1, range 32, base fedff000, size 12, enabled pcib0: slot 8 INTA routed to irq 16 found-> vendor=0x9004, dev=0x8378, revid=0x01 bus=0, slot=8, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=16 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000f400, size 8, enabled map[14]: type 1, range 32, base fedfe000, size 12, enabled pcib0: slot 9 INTA routed to irq 19 found-> vendor=0x9004, dev=0x6078, revid=0x03 bus=0, slot=9, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x04 (1000 ns) intpin=a, irq=19 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000fcc0, size 5, enabled map[14]: type 1, range 32, base fedfdc00, size 5, enabled pcib0: slot 17 INTA routed to irq 18 found-> vendor=0x1022, dev=0x2000, revid=0x25 bus=0, slot=17, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns) intpin=a, irq=18 map[10]: type 4, range 32, base 0000f000, size 8, enabled map[14]: type 1, range 32, base fedfc000, size 12, enabled map[18]: type 3, range 32, base fc000000, size 25, enabled pcib0: slot 18 INTA routed to irq 16 found-> vendor=0x9004, dev=0x1478, revid=0x01 bus=0, slot=18, func=0 class=05-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns) intpin=a, irq=16 agp0: mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfe000000-0xfebfffff pcib1: prefetched decode 0xf6000000-0xf6ffffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f6000000, size 24, enabled map[14]: type 1, range 32, base febf8000, size 14, enabled map[18]: type 1, range 32, base fe000000, size 23, enabled pcib1: slot 0 INTA routed to irq 18 found-> vendor=0x102b, dev=0x051f, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 pci1: at device 0.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xfcb0-0xfcbf at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: port 0xfce0-0xfcff irq 19 at device 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered piix0: port 0x8800-0x880f at device 7.3 on pci0 Timecounter "PIIX" frequency 3579545 Hz quality 0 ahc0: port 0xf800-0xf8ff mem 0xfedff000-0xfedfffff irq 16 at device 8.0 on pci0 ahc0: Defaulting to MEMIO off ahc0: Reading SEEPROM...done. ahc0: internal 50 cable not present, internal 68 cable not present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: High byte termination Enabled ahc0: Low byte termination Enabled ahc0: Downloading Sequencer Program... 440 instructions downloaded ahc0: Features 0x5, Bugs 0x11, Flags 0x20485563 aic7880: Ultra Wide Channel B, SCSI Id=15, 16/253 SCBs ahc1: port 0xf400-0xf4ff mem 0xfedfe000-0xfedfefff irq 19 at device 9.0 on pci0 ahc1: Defaulting to MEMIO off ahc1: Reading SEEPROM...done. ahc1: Low byte termination enabled ahc1: Downloading Sequencer Program... 459 instructions downloaded ahc1: Features 0x10101, Bugs 0x35, Flags 0x485540 aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs pcn0: port 0xfcc0-0xfcdf mem 0xfedfdc00-0xfedfdc1f irq 18 at device 17.0 on pci0 pcn0: Ethernet address: 00:60:b0:c3:a9:7e miibus0: on pcn0 lxtphy0: on miibus0 lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcn0: bpf attached pci0: at device 18.0 (no driver attached) unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 ADS7180: start dependent (0) ADS7180: adding irq mask 0xa0 ADS7180: adding dma mask 0x2 ADS7180: adding dma mask 0xb ADS7180: adding io range 0x220-0x24f, size=0x10, align=0x20 ADS7180: adding io range 0x388-0x38b, size=0x4, align=0x8 ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10 ADS7180: start dependent (1) ADS7180: adding irq mask 0x4a0 ADS7180: adding dma mask 0xb ADS7180: adding dma mask 0xb ADS7180: adding io range 0x220-0x24f, size=0x10, align=0x20 ADS7180: adding io range 0x388-0x38b, size=0x4, align=0x8 ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10 ADS7180: start dependent (1) ADS7180: adding irq mask 0x8ea0 ADS7180: adding dma mask 0xb ADS7180: adding dma mask 0xb ADS7180: adding io range 0x220-0x2ef, size=0x10, align=0x20 ADS7180: adding io range 0x388-0x3bb, size=0x4, align=0x8 ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10 ADS7180: start dependent (2) ADS7180: adding irq mask 0x8ea0 ADS7180: adding dma mask 0xb ADS7180: adding io range 0x220-0x2ef, size=0x10, align=0x20 ADS7180: adding io range 0x388-0x3bb, size=0x4, align=0x8 ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10 ADS7180: end dependent ADS7181: start dependent (0) ADS7181: adding irq mask 0xaa0 ADS7181: adding io range 0x300-0x331, size=0x2, align=0x30 ADS7181: start dependent (1) ADS7181: adding irq mask 0x8ea0 ADS7181: adding io range 0x300-0x421, size=0x2, align=0x30 ADS7181: end dependent ADS7182: start dependent (0) ADS7182: adding io range 0x200-0x207, size=0x8, align=0x8 ADS7182: start dependent (1) ADS7182: adding io range 0x200-0x20f, size=0x8, align=0x8 ADS7182: end dependent ex_isa_identify() pnpbios: 17 devices, largest 184 bytes PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000 PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000 pnpbios: handle 0 device ID PNP0c01 (010cd041) PNP0c02: adding io range 0x96-0x97, size=0x2, align=0x1 PNP0c02: adding fixed io range 0x2e-0x2f, size=0x2, align=0x1 PNP0c02: adding io range 0xe0-0xe7, size=0x8, align=0x1 PNP0c02: adding io range 0xe8-0xe9, size=0x2, align=0x1 PNP0c02: adding io range 0x8400-0x8403, size=0x4, align=0x1 PNP0c02: adding io range 0x8404-0x8407, size=0x4, align=0x1 PNP0c02: adding io range 0x8408-0x8409, size=0x2, align=0x1 PNP0c02: adding io range 0x8410-0x841f, size=0x10, align=0x1 PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 pnpbios: handle 1 device ID PNP0c02 (020cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 5 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 8 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 pnpbios: handle 10 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1 PNP0c02: adding io range 0x8800-0x880f, size=0x10, align=0x1 pnpbios: handle 11 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000 PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 pnpbios: handle 12 device ID PNP0c02 (020cd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x10 pnpbios: handle 13 device ID PNP0501 (0105d041) PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8 PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x8 PNP0401: adding irq mask 0x80 PNP0401: adding dma mask 0x2 pnpbios: handle 14 device ID PNP0401 (0104d041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 16 device ID PNP0700 (0007d041) PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x8 pnpbios: handle 17 device ID PNP0501 (0105d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 18 device ID PNP0f13 (130fd041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: