Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA3 #0: Mon Aug 22 22:59:46 UTC 2005 root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.86-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff Features2=0x441d> Hyperthreading: 2 logical CPUs real memory = 1073414144 (1023 MB) avail memory = 1037168640 (989 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: Power Button (fixed) pci_link0: irq 11 on acpi0 pci_link1: irq 10 on acpi0 pci_link2: irq 5 on acpi0 pci_link3: irq 10 on acpi0 pci_link4: irq 5 on acpi0 pci_link5: irq 10 on acpi0 pci_link6: irq 7 on acpi0 pci_link7: irq 3 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 cpu1: on acpi0 acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pci1: at device 0.1 (no driver attached) isab0: at device 2.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.5 on pci0 ata0: on atapci0 ata1: on atapci0 pci0: at device 2.7 (no driver attached) ohci0: mem 0xff6fc000-0xff6fcfff irq 20 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xff6fd000-0xff6fdfff irq 21 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2: mem 0xff6fe000-0xff6fefff irq 22 at device 3.2 on pci0 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xff6ff000-0xff6fffff irq 23 at device 3.3 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 3 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered sis0: port 0xe400-0xe4ff mem 0xff6fb000-0xff6fbfff irq 19 at device 4.0 on pci0 miibus0: on sis0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:11:d8:0a:e7:ea atapci1: port 0xeff0-0xeff7,0xefe4-0xefe7,0xefa8-0xefaf,0xefe0-0xefe3,0xef90-0xef9f irq 17 at device 5.0 on pci0 ata2: on atapci1 ata3: on atapci1 acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: at iomem 0xc0000-0xccfff,0xcd000-0xd4fff on isa0 ppc0: parallel port not found. sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec md0: Preloaded image 4423680 bytes at 0xc0a80378 acd0: DVDR at ata0-master UDMA33 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/md0 Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...3 0 done All buffers synced. unmount of /dev failed (BUSY) Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA3 #0: Mon Aug 22 22:59:46 UTC 2005 root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f12000. Preloaded mfs_root "/boot/mfsroot" at 0xc0f12180. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0f121c4. Calibrating clock(s) ... i8254 clock: 1193297 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3000868613 Hz CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.87-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff Features2=0x441d> Hyperthreading: 2 logical CPUs real memory = 1073414144 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001028000 - 0x000000003ed78fff, 1037373440 bytes (253265 pages) avail memory = 1037168640 (989 MB) Table 'FACP' at 0x3ffb0200 Table 'APIC' at 0x3ffb0390 MADT: Found table at 0x3ffb0390 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x31 pnpbios: Found PnP BIOS data at 0xc00f6ae0 pnpbios: Entry = f0000:76da Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 wlan: <802.11 Link Layer> random: nfslock: pseudo-device io: mem: Pentium Pro MTRR support enabled null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x800010c8 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06551039) pcibios: BIOS version 2.10 Found $PIR table, 10 entries at 0xc00f69b0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 2 A 0x41 3 4 5 7 10 11 12 14 15 embedded 0 2 B 0x42 3 4 5 7 10 11 12 14 15 embedded 0 2 C 0x43 3 4 5 7 10 11 12 14 15 embedded 0 2 D 0x44 3 4 5 7 10 11 12 14 15 embedded 0 3 A 0x60 3 4 5 7 10 11 12 14 15 embedded 0 3 B 0x61 3 4 5 7 10 11 12 14 15 embedded 0 3 C 0x62 3 4 5 7 10 11 12 14 15 embedded 0 3 D 0x63 3 4 5 7 10 11 12 14 15 embedded 0 5 A 0x42 3 4 5 7 10 11 12 14 15 embedded 0 1 A 0x41 3 4 5 7 10 11 12 14 15 embedded 0 1 B 0x42 3 4 5 7 10 11 12 14 15 embedded 0 1 C 0x43 3 4 5 7 10 11 12 14 15 embedded 0 1 D 0x44 3 4 5 7 10 11 12 14 15 embedded 0 4 A 0x44 3 4 5 7 10 11 12 14 15 slot 1 0 8 A 0x41 3 4 5 7 10 11 12 14 15 slot 1 0 8 B 0x42 3 4 5 7 10 11 12 14 15 slot 1 0 8 C 0x43 3 4 5 7 10 11 12 14 15 slot 1 0 8 D 0x44 3 4 5 7 10 11 12 14 15 slot 2 0 9 A 0x42 3 4 5 7 10 11 12 14 15 slot 2 0 9 B 0x43 3 4 5 7 10 11 12 14 15 slot 2 0 9 C 0x44 3 4 5 7 10 11 12 14 15 slot 2 0 9 D 0x41 3 4 5 7 10 11 12 14 15 slot 3 0 10 A 0x43 3 4 5 7 10 11 12 14 15 slot 3 0 10 B 0x44 3 4 5 7 10 11 12 14 15 slot 3 0 10 C 0x41 3 4 5 7 10 11 12 14 15 slot 3 0 10 D 0x42 3 4 5 7 10 11 12 14 15 slot 4 0 11 A 0x44 3 4 5 7 10 11 12 14 15 slot 4 0 11 B 0x41 3 4 5 7 10 11 12 14 15 slot 4 0 11 C 0x42 3 4 5 7 10 11 12 14 15 slot 4 0 11 D 0x43 3 4 5 7 10 11 12 14 15 slot 5 0 12 A 0x41 3 4 5 7 10 11 12 14 15 slot 5 0 12 B 0x42 3 4 5 7 10 11 12 14 15 slot 5 0 12 C 0x43 3 4 5 7 10 11 12 14 15 slot 5 0 12 D 0x44 3 4 5 7 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 2 func 0 AcpiOsDerivePciId: bus 0 dev 2 func 0 acpi0: Power Button (fixed) pci_link0: irq 11 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 7 10 11 12 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 7 10 11 12 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link1: irq 10 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 7 10 11 12 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 7 10 11 12 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link2: irq 5 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 7 10 11 12 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 7 10 11 12 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link3: irq 10 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 7 10 11 12 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 7 10 11 12 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link4: irq 5 on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 7 10 11 12 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 7 10 11 12 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link5: irq 10 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 7 10 11 12 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 7 10 11 12 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link6: irq 7 on acpi0 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 7 N 0 3 4 5 7 10 11 12 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 7 N 0 3 4 5 7 10 11 12 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link7: irq 3 on acpi0 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 3 N 0 3 4 5 7 10 11 12 14 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 3 N 0 3 4 5 7 10 11 12 14 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 12 14 15 ACPI timer: 1/1 1/1 1/1 0/814 1/1 1/1 1/1 1/1 1/1 1/1 -> 9 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x810 cpu1: on acpi0 acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1039, dev=0x0655, revid=0x50 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f8000000, size 26, enabled found-> vendor=0x1039, dev=0x0003, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x0964, revid=0x36 bus=0, slot=2, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x5513, revid=0x01 bus=0, slot=2, func=5 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x1039, dev=0x7012, revid=0xa0 bus=0, slot=2, func=7 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=c, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 4, range 32, base 0000ec00, size 7, enabled pcib0: matched entry for 0.2.INTC pcib0: slot 2 INTC hardwired to IRQ 18 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=5 map[10]: type 1, range 32, base ff6fc000, size 12, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 20 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=b, irq=10 map[10]: type 1, range 32, base ff6fd000, size 12, enabled pcib0: matched entry for 0.3.INTB pcib0: slot 3 INTB hardwired to IRQ 21 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=2 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=c, irq=7 map[10]: type 1, range 32, base ff6fe000, size 12, enabled pcib0: matched entry for 0.3.INTC pcib0: slot 3 INTC hardwired to IRQ 22 found-> vendor=0x1039, dev=0x7002, revid=0x00 bus=0, slot=3, func=3 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base ff6ff000, size 12, enabled pcib0: matched entry for 0.3.INTD pcib0: slot 3 INTD hardwired to IRQ 23 found-> vendor=0x1039, dev=0x0900, revid=0x91 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e400, size 8, enabled map[14]: type 1, range 32, base ff6fb000, size 12, enabled pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 19 found-> vendor=0x1039, dev=0x0180, revid=0x01 bus=0, slot=5, func=0 class=01-04-85, hdrtype=0x00, mfdev=0 cmdreg=0x0405, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type 4, range 32, base 0000eff0, size 3, enabled map[14]: type 4, range 32, base 0000efe4, size 2, enabled map[18]: type 4, range 32, base 0000efa8, size 3, enabled map[1c]: type 4, range 32, base 0000efe0, size 2, enabled map[20]: type 4, range 32, base 0000ef90, size 4, enabled pcib0: matched entry for 0.5.INTA pcib0: slot 5 INTA hardwired to IRQ 17 agp0: mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000 agp0: allocating GATT for aperture of size 64M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xff500000-0xff5fffff pcib1: prefetched decode 0xd7f00000-0xf7efffff pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x5960, revid=0x01 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e8000000, size 27, enabled pcib1: (null) requested memory range 0xe8000000-0xefffffff: good map[14]: type 4, range 32, base 0000d000, size 8, enabled pcib1: (null) requested I/O range 0xd000-0xd0ff: in range map[18]: type 1, range 32, base ff5f0000, size 16, enabled pcib1: (null) requested memory range 0xff5f0000-0xff5fffff: good pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 found-> vendor=0x1002, dev=0x5940, revid=0x01 bus=1, slot=0, func=1 class=03-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e0000000, size 27, enabled pcib1: (null) requested memory range 0xe0000000-0xe7ffffff: good map[14]: type 1, range 32, base ff5e0000, size 16, enabled pcib1: (null) requested memory range 0xff5e0000-0xff5effff: good pci1: at device 0.0 (no driver attached) pci1: at device 0.1 (no driver attached) isab0: at device 2.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.5 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x0 ata1: [MPSAFE] pci0: at device 2.7 (no driver attached) pci0:2:7: Transition from D0 to D3 ohci0: mem 0xff6fc000-0xff6fcfff irq 20 at device 3.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff6fc000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xff6fd000-0xff6fdfff irq 21 at device 3.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff6fd000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2: mem 0xff6fe000-0xff6fefff irq 22 at device 3.2 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff6fe000 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xff6ff000-0xff6fffff irq 23 at device 3.3 on pci0 ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff6ff000 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 3 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered sis0: port 0xe400-0xe4ff mem 0xff6fb000-0xff6fbfff irq 19 at device 4.0 on pci0 sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400 miibus0: on sis0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: bpf attached sis0: [MPSAFE] atapci1: port 0xeff0-0xeff7,0xefe4-0xefe7,0xefa8-0xefaf,0xefe0-0xefe3,0xef90-0xef9f irq 17 at device 5.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xef90 atapci1: [MPSAFE] ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xeff0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xefe4 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xefa8 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xefe0 ata3: reset tp1 mask=03 ostat0=7f ostat1=7f ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff ata3: reset tp2 stat0=ff stat1=ff devices=0x0 ata3: [MPSAFE] acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ahc_isa_probe 14: ioport 0xec00 alloc failed ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xccfff,0xcd000-0xd4fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Device configuration finished. procfs registered lapic: Divisor 2, Frequency 100028600 hz Timecounter "TSC" frequency 3000868613 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached md0: Preloaded image 4423680 bytes at 0xc0a80378 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on SiS 964 chip acd0: setting UDMA33 on SiS 964 chip acd0: DVDR drive at ata0 as master acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-R 120mm data disc ata2: reiniting channel .. ata2: reset tp1 mask=03 ostat0=58 ostat1=58 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: reinit done .. ata2: reiniting channel .. ata2: reset tp1 mask=03 ostat0=58 ostat1=58 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: reinit done .. ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0 ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0 Trying to mount root from ufs:/dev/md0 start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /rescue/init start_init: trying /stand/sysinstall