OK boot -vs GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=00000000000a0000 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=01 base=0000000000100000 len=000000001f6f0000 SMAP type=03 base=000000001f7f3000 len=000000000000d000 SMAP type=04 base=000000001f7f0000 len=0000000000003000 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA3 #5: Sun Aug 28 17:43:50 CEST 2005 root@little:/usr/obj/usr/src/sys/LITTLE Preloaded elf kernel "/boot/kernel/kernel" at 0xc06b8000. Preloaded elf module "/boot/modules/agp.ko" at 0xc06b81d8. Preloaded elf module "/boot/modules/io.ko" at 0xc06b8284. Preloaded elf module "/boot/modules/mem.ko" at 0xc06b832c. Preloaded elf module "/boot/modules/random.ko" at 0xc06b83d8. module agp already present! Calibrating clock(s) ... i8254 clock: 1193103 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 532639997 Hz CPU: VIA C3 Samuel 2 (532.64-MHz 686-class CPU) Origin = "CentaurHauls" Id = 0x673 Stepping = 3 Features=0x803035 real memory = 528416768 (503 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000825000 - 0x000000001eedbfff, 510357504 bytes (124599 pages) avail memory = 511975424 (488 MB) bios32: Found BIOS32 Service Directory header at 0xc00fb090 bios32: Entry = 0xfb500 (c00fb500) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb530 pnpbios: Found PnP BIOS data at 0xc00fbfd0 pnpbios: Entry = f0000:c000 Rev = 1.0 Other BIOS signatures found: null: io: mem: random: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface cpu0 on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011106) pcibios: BIOS version 2.10 Found $PIR table, 7 entries at 0xc00fde40 PCI-Only Interrupts: 5 10 11 12 Location Bus Device Pin Link IRQs slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 D 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 6 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 3 0 6 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 3 0 6 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 6 D 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 7 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 5 0 7 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 7 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 5 0 7 D 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15 pcib0: pcibus 0 on motherboard pir0: on motherboard $PIR: Links after initial probe: Link IRQ Rtd Ref IRQs 0x1 255 N 6 3 4 5 7 9 10 11 12 14 15 0x2 255 N 6 3 4 5 7 9 10 11 12 14 15 0x3 255 N 7 3 4 5 7 9 10 11 12 14 15 0x5 255 N 7 3 4 5 7 9 10 11 12 14 15 $PIR: Found matching pin for 0.8.INTA at func 0: 12 $PIR: Found matching pin for 0.9.INTA at func 0: 10 $PIR: Found matching pin for 0.11.INTA at func 0: 11 $PIR: Found matching pin for 0.7.INTC at func 5: 5 $PIR: BIOS IRQ 5 for 0.7.INTC does not match link 0x5 irq 11 $PIR: Found matching pin for 0.7.INTD at func 2: 255 $PIR: Found matching pin for 0.7.INTD at func 3: 255 $PIR: Found matching pin for 0.7.INTC at func 5: 5 $PIR: Found matching pin for 0.7.INTD at func 2: 255 $PIR: Found matching pin for 0.7.INTD at func 3: 255 $PIR: Links after initial IRQ discovery: Link IRQ Rtd Ref IRQs 0x1 12 Y 6 3 4 5 7 9 10 11 12 14 15 0x2 10 Y 6 3 4 5 7 9 10 11 12 14 15 0x3 5 Y 7 3 4 5 7 9 10 11 12 14 15 0x5 11 Y 7 3 4 5 7 9 10 11 12 14 15 $PIR: IRQs used by BIOS: 5 10 11 12 $PIR: Interrupt Weights: [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] [ 0 0 0 0 0 7 0 0 0 0 6 7 6 0 0 0 ] pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1106, dev=0x0601, revid=0x05 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2290, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base e0000000, size 26, enabled found-> vendor=0x1106, dev=0x8601, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0xa230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x0686, revid=0x40 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000c000, size 4, enabled found-> vendor=0x1106, dev=0x3038, revid=0x1a bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000c400, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x1a bus=0, slot=7, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000c800, size 5, enabled found-> vendor=0x1106, dev=0x3057, revid=0x40 bus=0, slot=7, func=4 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x3058, revid=0x50 bus=0, slot=7, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000cc00, size 8, enabled map[14]: type 4, range 32, base 0000d000, size 2, enabled map[18]: type 4, range 32, base 0000d400, size 2, enabled $PIR: 0:7 INTC routed to irq 5 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 1, range 32, base e5810000, size 8, enabled $PIR: 0:8 INTA routed to irq 12 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000dc00, size 8, enabled map[14]: type 1, range 32, base e5811000, size 8, enabled $PIR: 0:9 INTA routed to irq 10 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e000, size 8, enabled map[14]: type 1, range 32, base e5812000, size 8, enabled $PIR: 0:11 INTA routed to irq 11 agp0: mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: allocating GATT for aperture of size 256M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xe4000000-0xe57fffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1023, dev=0x8500, revid=0x6a bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=12 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e4000000, size 23, enabled pcib1: (null) requested memory range 0xe4000000-0xe47fffff: good map[14]: type 1, range 32, base e5000000, size 17, enabled pcib1: (null) requested memory range 0xe5000000-0xe501ffff: good map[18]: type 1, range 32, base e4800000, size 23, enabled pcib1: (null) requested memory range 0xe4800000-0xe4ffffff: good $PIR: 0:1 INTA routed to irq 12 pcib1: slot 0 INTA is routed to irq 12 pci1: at device 0.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc000 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=01 ostat0=50 ostat1=ff ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=50 stat1=00 devices=0x1 ata1: [MPSAFE] pci0: at device 7.2 (no driver attached) pci0:7:2: Transition from D0 to D3 pci0: at device 7.3 (no driver attached) pci0:7:3: Transition from D0 to D3 pci0: at device 7.4 (no driver attached) pci0:7:4: Transition from D0 to D3 pci0: at device 7.5 (no driver attached) pci0:7:5: Transition from D0 to D3 pci0: at device 8.0 (no driver attached) pci0:8:0: Transition from D0 to D3 pci0: at device 9.0 (no driver attached) pci0:9:0: Transition from D0 to D3 pci0: at device 11.0 (no driver attached) pci0:11:0: Transition from D0 to D3 pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 14 devices, largest 69 bytes PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x81-0x83, size=0x3, align=0 PNP0200: adding io range 0x87-0x87, size=0x1, align=0 PNP0200: adding io range 0x89-0x8b, size=0x3, align=0 PNP0200: adding io range 0x8f-0x91, size=0x3, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 pnpbios: handle 1 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 pnpbios: handle 2 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 pnpbios: handle 3 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 pnpbios: handle 4 device ID PNP0303 (0303d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 5 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 pnpbios: handle 6 device ID PNP0c04 (040cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0xffffff, size=0xf00000 pnpbios: handle 7 device ID PNP0c01 (010cd041) PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000 PNP0c02: adding fixed memory32 range 0xcc000-0xcffff, size=0x4000 pnpbios: handle 8 device ID PNP0c02 (020cd041) PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 PNP0a03: adding io range 0x4000-0x407f, size=0x80, align=0 PNP0a03: adding io range 0x4080-0x40ff, size=0x80, align=0 PNP0a03: adding io range 0x5000-0x501f, size=0x20, align=0 PNP0a03: adding io range 0x6000-0x607f, size=0x80, align=0 pnpbios: handle 9 device ID PNP0a03 (030ad041) PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0 PNP0700: adding irq mask 0x40 pnpbios: handle 11 device ID PNP0700 (0007d041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 pnpbios: handle 12 device ID PNP0501 (0105d041) PNP0501: adding irq mask 0x8 PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0 pnpbios: handle 13 device ID PNP0501 (0105d041) PNP0400: adding irq mask 0x80 PNP0400: adding io range 0x378-0x37f, size=0x8, align=0 pnpbios: handle 14 device ID PNP0400 (0004d041) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcbfff,0xcc000-0xcffff on isa0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0067 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: can't assign resources (port) unknown: at port 0x60 on isa0 unknown: failed to probe at port 0x61 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0-0x9ffff on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xf0000-0xf3fff,0xf4000-0xf7fff,0xf8000-0xfffff,0xcc000-0xcffff on isa0 unknown: failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 unknown: can't assign resources (port) unknown: at port 0x3f8-0x3ff on isa0 unknown: can't assign resources (port) unknown: at port 0x2f8-0x2ff on isa0 unknown: failed to probe at port 0x378-0x37f irq 7 on isa0 Device configuration finished. Timecounter "TSC" frequency 532639997 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire ad0: setting PIO4 on VIA 82C686B chip ad0: setting UDMA66 on VIA 82C686B chip ad0: 9590MB at ata0-master UDMA66 ad0: 19640880 sectors [19485C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ata1-master: pio=PIO4 wdma=BIOSDMA udma=BIOSDMA cable=40 wire ad2: setting PIO4 on VIA 82C686B chip ad2: 489MB at ata1-master PIO4 ad2: 1001952 sectors [994C/16H/63S] 1 sectors/interrupt 1 depth queue GEOM: new disk ad2 Trying to mount root from ufs:/dev/ad3s1a Manual root filesystem specification: : Mount using filesystem eg. ufs:da0s1a ? List valid disstray irq7 k boot devices Abort manual input mountroot> ufsV: Trying to mount root from ufs: Manual root filesystem specification: : Mount using filesystem eg. ufs:da0s1a ? List valid disk boot devices Abort manual input mountroot> ufs:/dev/ad2s1a Trying to mount root from ufs:/dev/ad2s1a start_init: trying /sbin/init KDB: enter: manual escape to debstray irq7 ugger [thread pid 13 tid 100003 ] Stopped at kdb_enter+0x2b: nop db> ps pid proc uid ppid pgrp flag stat wmesg wchan cmd 39 c12ef000 0 0 0 0000204 [SLPQ - 0xd4c87d08][SLP] schedcpu 38 c11c7c48 0 0 0 0000204 [SLPQ vlruwt 0xc11c7c48][SLP] vnlru 37 c120c000 0 0 0 0000204 [SLPQ syncer 0xc06079fc][SLP] syncer 36 c120c20c 0 0 0 0000204 [SLPQ psleep 0xc060cb2c][SLP] bufdaemon 9 c120c418 0 0 0 000020c [RUNQ] pagezero 8 c120c624 0 0 0 0000204 [SLPQ psleep 0xc060fdb4][SLP] vmdaemon 7 c120c830 0 0 0 0000204 [SLPQ psleep 0xc060fd70][SLP] pagedaemon 35 c120ca3c 0 0 0 0000204 [IWAIT] swi0: sio 34 c120cc48 0 0 0 0000204 [IWAIT] swi6:+ 33 c120d000 0 0 0 0000204 [IWAIT] swi6: task queue 32 c120d20c 0 0 0 0000204 [IWAIT] swi2: cambio 6 c120d418 0 0 0 0000204 [SLPQ - 0xc1184e00][SLP] kqueue taskq 31 c11bf624 0 0 0 0000204 [IWAIT] swi5:+ 5 c11bf830 0 0 0 0000204 [SLPQ - 0xc11d3080][SLP] thread taskq 30 c11bfa3c 0 0 0 0000204 [SLPQ - 0xc06b45e0][SLP] yarrow 4 c11bfc48 0 0 0 0000204 [SLPQ - 0xc06051a8][SLP] g_down 3 c11c7000 0 0 0 0000204 [SLPQ - 0xc06051a4][SLP] g_up 2 c11c720c 0 0 0 0000204 [SLPQ - 0xc060519c][SLP] g_event 29 c11c7418 0 0 0 0000204 [IWAIT] swi3: vm 28 c11c7624 0 0 0 000020c [RUNQ] swi4: clock sio 27 c11c7830 0 0 0 0000204 [IWAIT] swi1: net 26 c11c7a3c 0 0 0 0000204 [IWAIT] irq15: ata1 25 c118b20c 0 0 0 0000204 [IWAIT] irq14: ata0 24 c118b418 0 0 0 0000204 [IWAIT] irq13: 23 c118b624 0 0 0 0000204 [IWAIT] irq12: 22 c118b830 0 0 0 0000204 [IWAIT] irq11: 21 c118ba3c 0 0 0 0000204 [IWAIT] irq10: 20 c118bc48 0 0 0 0000204 [IWAIT] irq9: 19 c11bf000 0 0 0 0000204 [IWAIT] irq8: rtc 18 c11bf20c 0 0 0 0000204 [IWAIT] irq7: 17 c11bf418 0 0 0 0000204 [IWAIT] irq6: 16 c1185000 0 0 0 0000204 [IWAIT] irq5: 15 c118520c 0 0 0 0000204 [IWAIT] irq4: sio0 14 c1185418 0 0 0 0000204 [IWAIT] irq3: sio1 13 c1185624 0 0 0 0000204 [CPU 0] irq1: atkbd0 12 c1185830 0 0 0 0000204 [IWAIT] irq0: clk 11 c1185a3c 0 0 0 000020c [Can run] idle 1 c1185c48 0 0 0 0004200 [RUNQ] init 10 c118b000 0 0 0 0000204 [SLPQ ktrace 0xc0605bf8][SLP] ktrace 0 c06052a0 0 0 0 0000200 [IWAIT] swapper db> tr Tracing pid 13 tid 100003 td 0xc1186a80 kdb_enter(c05d155d) at kdb_enter+0x2b scgetc(c06263a0,2,1,c1239300,c0610280) at scgetc+0x498 sckbdevent(c0610280,0,c06263a0) at sckbdevent+0x1c8 atkbd_intr(c0610280,0,d3a86d10,c048cdd5,c0610280) at atkbd_intr+0x20 atkbdintr(c0610280) at atkbdintr+0x16 ithread_loop(c1183d00,d3a86d38) at ithread_loop+0x145 fork_exit(c048cc90,c1183d00,d3a86d38) at fork_exit+0x70 fork_trampoline() at fork_trampoline+0x8 --- trap 0x1, eip = 0, esp = 0xd3a86d6c, ebp = 0 ---