Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200708 #0: Fri Aug 17 07:47:18 UTC 2007
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ (2410.99-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
real memory  = 2146304000 (2046 MB)
avail memory = 2086567936 (1989 MB)
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi0: Power Button (fixed)
acpi0: reservation of fefff000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x8c00-0x8c7f mem 0xfa000000-0xfaffffff,0xc0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1
pci0: <memory, RAM> at device 8.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 9.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 9.1 (no driver attached)
pci0: <memory, RAM> at device 9.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 10.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 10.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
ugen0: <vendor 0x0bda RTL8187_Wireless, class 0/0, rev 2.00/1.00, addr 2> on uhub1
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 12.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 23 at device 13.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 20 at device 13.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f mem 0xfe02b000-0xfe02bfff irq 21 at device 13.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci4: <HighPoint HPT370 UDMA100 controller> port 0xac00-0xac07,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00-0x9cff irq 17 at device 7.0 on pci2
atapci4: [ITHREAD]
ata8: <ATA channel 0> on atapci4
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci4
ata9: [ITHREAD]
pci2: <multimedia, audio> at device 8.0 (no driver attached)
pci2: <input device> at device 8.1 (no driver attached)
fwohci0: <1394 Open Host Controller Interface> mem 0xfdfff000-0xfdfff7ff,0xfdff8000-0xfdffbfff irq 19 at device 8.2 on pci2
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:01:05:4b:71
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:05:4b:71
fwe0: Ethernet address: 02:02:3c:05:4b:71
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:02:3c:01:01:05:4b:71 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7d874000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
fwohci1: <Texas Instruments TSB43AB22/A> mem 0xfdffe000-0xfdffe7ff,0xfdff4000-0xfdff7fff irq 16 at device 11.0 on pci2
fwohci1: [FILTER]
fwohci1: OHCI version 1.10 (ROM=1)
fwohci1: No. of Isochronous channels is 4.
fwohci1: EUI64 00:11:d8:00:01:47:44:d9
fwohci1: Phy 1394a available S400, 2 ports.
fwohci1: Link S400, max_rec 2048 bytes.
firewire1: <IEEE1394(FireWire) bus> on fwohci1
fwe1: <Ethernet over FireWire> on firewire1
if_fwe1: Fake Ethernet address: 02:11:d8:47:44:d9
fwe1: Ethernet address: 02:11:d8:47:44:d9
fwip1: <IP over FireWire> on firewire1
fwip1: Firewire address: 00:11:d8:00:01:47:44:d9 @ 0xfffe00000000, S400, maxrec 2048
sbp1: <SBP-2/SCSI over FireWire> on firewire1
dcons_crom1: <dcons configuration ROM> on firewire1
dcons_crom1: bus_addr 0x7d874000
dcons_crom1: dcons_paddr is already set
fwohci1: Initiate bus reset
fwohci1: BUS reset
fwohci1: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 22 at device 16.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: Ethernet address: 00:1b:fc:39:fb:23
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci5: <SiI 3132 SATA300 controller> port 0x7c00-0x7c7f mem 0xfdeff000-0xfdeff07f,0xfdef8000-0xfdefbfff irq 16 at device 0.0 on pci3
atapci5: [ITHREAD]
ata10: <ATA channel 0> on atapci5
ata10: [ITHREAD]
ata11: <ATA channel 1> on atapci5
ata11: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd47ff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/15.00, addr 2> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
firewire1: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire1: bus manager 0 (me)
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0d1b558
acd0: DVDR <HL-DT-ST DVDRAM GSA-4120B/A115> at ata0-master UDMA33
acd1: DVDROM <HL-DT-STDVD-ROM GDR8163B/0L23> at ata0-slave UDMA33
ad4: 476940MB <Seagate ST3500630AS 3.AAK> at ata2-master SATA150
ad6: 286188MB <Maxtor 6L300S0 BACE1G20> at ata3-master SATA150
ad16: 76319MB <Seagate ST380011A 3.06> at ata8-master UDMA100
ad18: 76319MB <Seagate ST380011A 3.06> at ata9-master UDMA100
GEOM_LABEL: Label for provider acd1 is iso9660/FreeBSD_Install.
GEOM_LABEL: Label for provider ad4s5 is msdosfs/ .
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/md0
GEOM_LABEL: Label msdosfs/  removed.
GEOM_LABEL: Label for provider ad4s5 is msdosfs/ .
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 0 1 0 0 0 done
All buffers synced.
Uptime: 30m40s
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200708 #0: Fri Aug 17 07:47:18 UTC 2007
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ (2410.99-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
real memory  = 2146304000 (2046 MB)
avail memory = 2090766336 (1993 MB)
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi0: Power Button (fixed)
acpi0: reservation of fefff000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x8c00-0x8c7f mem 0xfa000000-0xfaffffff,0xc0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1
pci0: <memory, RAM> at device 8.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 9.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 9.1 (no driver attached)
pci0: <memory, RAM> at device 9.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 10.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 10.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
ugen0: <vendor 0x0bda RTL8187_Wireless, class 0/0, rev 2.00/1.00, addr 2> on uhub1
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 12.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 23 at device 13.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 20 at device 13.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f mem 0xfe02b000-0xfe02bfff irq 21 at device 13.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci4: <HighPoint HPT370 UDMA100 controller> port 0xac00-0xac07,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00-0x9cff irq 17 at device 7.0 on pci2
atapci4: [ITHREAD]
ata8: <ATA channel 0> on atapci4
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci4
ata9: [ITHREAD]
pci2: <multimedia, audio> at device 8.0 (no driver attached)
pci2: <input device> at device 8.1 (no driver attached)
fwohci0: <1394 Open Host Controller Interface> mem 0xfdfff000-0xfdfff7ff,0xfdff8000-0xfdffbfff irq 19 at device 8.2 on pci2
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:01:05:4b:71
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:05:4b:71
fwe0: Ethernet address: 02:02:3c:05:4b:71
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:02:3c:01:01:05:4b:71 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7d874000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
fwohci1: <Texas Instruments TSB43AB22/A> mem 0xfdffe000-0xfdffe7ff,0xfdff4000-0xfdff7fff irq 16 at device 11.0 on pci2
fwohci1: [FILTER]
fwohci1: OHCI version 1.10 (ROM=1)
fwohci1: No. of Isochronous channels is 4.
fwohci1: EUI64 00:11:d8:00:01:47:44:d9
fwohci1: Phy 1394a available S400, 2 ports.
fwohci1: Link S400, max_rec 2048 bytes.
firewire1: <IEEE1394(FireWire) bus> on fwohci1
fwe1: <Ethernet over FireWire> on firewire1
if_fwe1: Fake Ethernet address: 02:11:d8:47:44:d9
fwe1: Ethernet address: 02:11:d8:47:44:d9
fwip1: <IP over FireWire> on firewire1
fwip1: Firewire address: 00:11:d8:00:01:47:44:d9 @ 0xfffe00000000, S400, maxrec 2048
sbp1: <SBP-2/SCSI over FireWire> on firewire1
dcons_crom1: <dcons configuration ROM> on firewire1
dcons_crom1: bus_addr 0x7d874000
dcons_crom1: dcons_paddr is already set
fwohci1: Initiate bus reset
fwohci1: BUS reset
fwohci1: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 22 at device 16.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: Ethernet address: 00:1b:fc:39:fb:23
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci5: <SiI 3132 SATA300 controller> port 0x7c00-0x7c7f mem 0xfdeff000-0xfdeff07f,0xfdef8000-0xfdefbfff irq 16 at device 0.0 on pci3
atapci5: [ITHREAD]
ata10: <ATA channel 0> on atapci5
ata10: [ITHREAD]
ata11: <ATA channel 1> on atapci5
ata11: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd47ff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/15.00, addr 2> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
firewire1: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire1: bus manager 0 (me)
acd0: DVDR <HL-DT-ST DVDRAM GSA-4120B/A115> at ata0-master UDMA33
acd1: DVDROM <HL-DT-STDVD-ROM GDR8163B/0L23> at ata0-slave UDMA33
ad4: 476940MB <Seagate ST3500630AS 3.AAK> at ata2-master SATA150
ad6: 286188MB <Maxtor 6L300S0 BACE1G20> at ata3-master SATA150
ad16: 76319MB <Seagate ST380011A 3.06> at ata8-master UDMA100
ad18: 76319MB <Seagate ST380011A 3.06> at ata9-master UDMA100
GEOM_LABEL: Label for provider ad4s5 is msdosfs/ .
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad4s3a
nfe0: link state changed to UP
nfe0: link state changed to DOWN
nfe0: link state changed to UP
nfe0: link state changed to DOWN
nfe0: link state changed to UP
nfe0: link state changed to DOWN
nfe0: link state changed to UP
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
GEOM_LABEL: Label for provider acd1t01 is iso9660/FreeBSD_Install.
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 1 0 0 0 done
All buffers synced.
Uptime: 1h21m40s
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200708 #3: Fri Aug 31 21:33:20 BRT 2007
    root@exxodus.fedaykin.here:/usr/src/sys/i386/compile/LIOUX
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ (2410.99-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
real memory  = 2146304000 (2046 MB)
avail memory = 2095038464 (1997 MB)
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi0: Power Button (fixed)
acpi0: reservation of fefff000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x8c00-0x8c7f mem 0xfa000000-0xfaffffff,0xc0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1
pci0: <memory, RAM> at device 8.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 9.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 9.1 (no driver attached)
pci0: <memory, RAM> at device 9.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 10.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 10.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
ugen0: <vendor 0x0bda RTL8187_Wireless, class 0/0, rev 2.00/1.00, addr 2> on uhub1
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 12.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 23 at device 13.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 20 at device 13.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f mem 0xfe02b000-0xfe02bfff irq 21 at device 13.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci4: <HighPoint HPT370 UDMA100 controller> port 0xac00-0xac07,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00-0x9cff irq 17 at device 7.0 on pci2
atapci4: [ITHREAD]
ata8: <ATA channel 0> on atapci4
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci4
ata9: [ITHREAD]
pci2: <multimedia, audio> at device 8.0 (no driver attached)
pci2: <input device> at device 8.1 (no driver attached)
pci2: <serial bus, FireWire> at device 8.2 (no driver attached)
pci2: <serial bus, FireWire> at device 11.0 (no driver attached)
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 22 at device 16.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: Ethernet address: 00:1b:fc:39:fb:23
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci5: <SiI 3132 SATA300 controller> port 0x7c00-0x7c7f mem 0xfdeff000-0xfdeff07f,0xfdef8000-0xfdefbfff irq 16 at device 0.0 on pci3
atapci5: [ITHREAD]
ata10: <ATA channel 0> on atapci5
ata10: [ITHREAD]
ata11: <ATA channel 1> on atapci5
ata11: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd47ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/15.00, addr 2> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <HL-DT-ST DVDRAM GSA-4120B/A115> at ata0-master UDMA33
acd1: DVDROM <HL-DT-STDVD-ROM GDR8163B/0L23> at ata0-slave UDMA33
ad4: 476940MB <Seagate ST3500630AS 3.AAK> at ata2-master SATA150
ad6: 286188MB <Maxtor 6L300S0 BACE1G20> at ata3-master SATA150
ad16: 76319MB <Seagate ST380011A 3.06> at ata8-master UDMA100
ad18: 76319MB <Seagate ST380011A 3.06> at ata9-master UDMA100
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad4s5 is msdosfs/ .
Trying to mount root from ufs:/dev/ad4s3a
nfe0: link state changed to UP