Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #4 r189024M: Wed Feb 25 09:32:27 EST 2009 root@xxx:/usr/obj/amd64/usr/src/head/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff810ac000. Preloaded elf obj module "/boot/kernel/geom_concat.ko" at 0xffffffff810ac1f8. Preloaded elf obj module "/boot/kernel/geom_uzip.ko" at 0xffffffff810ac868. Preloaded elf obj module "/boot/kernel/zlib.ko" at 0xffffffff810ace58. Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff810ad400. Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff810ada28. Preloaded elf obj module "/boot/kernel/wlan_xauth.ko" at 0xffffffff810ae0d0. Preloaded elf obj module "/boot/kernel/wlan_acl.ko" at 0xffffffff810ae6c0. Preloaded elf obj module "/boot/kernel/smb.ko" at 0xffffffff810aed70. Preloaded elf obj module "/boot/kernel/smbus.ko" at 0xffffffff810af298. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1908702688 Hz CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-58 (1908.70-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x60f81 Stepping = 1 Features=0x178bfbff Features2=0x2001 AMD Features=0xea500800 AMD Features2=0x11f Cores per package: 2 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative usable memory = 1525403648 (1454 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages) 0x00000000010dc000 - 0x000000005966efff, 1482240000 bytes (361875 pages) avail memory = 1472200704 (1404 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP @ 0x0xf88f0/0x0014 (v 0 HP ) ACPI: RSDT @ 0x0x5bf0bb25/0x0040 (v 1 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000000) ACPI: FACP @ 0x0x5bf14b16/0x0074 (v 1 HP MCP51M 0x06040000 PTL_ 0x000F4240) ACPI: DSDT @ 0x0x5bf0bb65/0x8FB1 (v 1 HP MCP51M 0x06040000 MSFT 0x03000000) ACPI: FACS @ 0x0x5bf15fc0/0x0040 ACPI: SSDT @ 0x0x5bf14b8a/0x0206 (v 1 PTLTD POWERNOW 0x06040000 LTP 0x00000001) ACPI: MCFG @ 0x0x5bf14d90/0x003C (v 1 HP MCFG 0x06040000 LTP 0x00000000) ACPI: HPET @ 0x0x5bf14dcc/0x0038 (v 1 PTLTD HPETTBL 0x06040000 LTP 0x00000001) ACPI: APIC @ 0x0x5bf14e04/0x005E (v 1 HP APIC 0x06040000 LTP 0x00000000) ACPI: BOOT @ 0x0x5bf14e62/0x0028 (v 1 HP $SBFTBL$ 0x06040000 LTP 0x00000001) ACPI: SLIC @ 0x0x5bf14e8a/0x0176 (v 1 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000001) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 wlan: <802.11 Link Layer> wlan: mac acl policy registered kbd: new array size 4 kbd1 at kbdmux0 mem: nfslock: pseudo-device null: random: io: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb 24 2009 10:12:34) acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P44_ -> bus 0 dev 10 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P60_ -> bus 0 dev 10 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P64_ -> bus 0 dev 10 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P68_ -> bus 0 dev 10 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SBA2 -> bus 0 dev 10 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P74_ -> bus 0 dev 10 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.XVR2.PCE1 -> bus 0 dev 2 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRQ -> bus 0 dev 10 func 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 0/360 1/1 -> 9 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 Validation 0 255 N 0 5 After Disable 0 255 N 0 5 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 7 Validation 0 255 N 0 7 After Disable 0 255 N 0 7 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 10 Validation 0 255 N 0 10 After Disable 0 255 N 0 10 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 11 Validation 0 255 N 0 11 After Disable 0 255 N 0 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 17 Validation 0 255 N 0 17 After Disable 0 255 N 0 17 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 18 Validation 0 255 N 0 18 After Disable 0 255 N 0 18 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 19 Validation 0 255 N 0 19 After Disable 0 255 N 0 19 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 Validation 0 10 N 0 10 After Disable 0 255 N 0 10 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 11 Validation 0 255 N 0 11 After Disable 0 255 N 0 11 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 22 Validation 0 255 N 0 22 After Disable 0 255 N 0 22 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 22 Validation 0 255 N 0 22 After Disable 0 255 N 0 22 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 20 Validation 0 255 N 0 20 After Disable 0 255 N 0 20 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 21 Validation 0 255 N 0 21 After Disable 0 255 N 0 21 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 21 Validation 0 255 N 0 21 After Disable 0 255 N 0 21 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 21 Validation 0 255 N 0 21 After Disable 0 255 N 0 21 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 21 Validation 0 255 N 0 21 After Disable 0 255 N 0 21 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 23 Validation 0 255 N 0 23 After Disable 0 255 N 0 23 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 20 Validation 0 255 N 0 20 After Disable 0 255 N 0 20 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: on acpi0 acpi_button1: on acpi0 acpi_acad0: on acpi0 battery0: on acpi0 acpi_lid0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.10.INTA at func 1: 10 ACPI: Found matching pin for 0.10.INTB at func 3: 10 pci_link9: BIOS IRQ 10 for 0.10.INTB is invalid pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x10de, dev=0x02f0, revid=0xa2 domain=0, bus=0, slot=0, func=0 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fa, revid=0xa2 domain=0, bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fe, revid=0xa2 domain=0, bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02f8, revid=0xa2 domain=0, bus=0, slot=0, func=3 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02f9, revid=0xa2 domain=0, bus=0, slot=0, func=4 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02ff, revid=0xa2 domain=0, bus=0, slot=0, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x027f, revid=0xa2 domain=0, bus=0, slot=0, func=6 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x027e, revid=0xa2 domain=0, bus=0, slot=0, func=7 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fc, revid=0xa1 domain=0, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x02fd, revid=0xa1 domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0244, revid=0xa2 domain=0, bus=0, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xb2000000, size 24, enabled map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled map[1c]: type Memory, range 64, base 0xb1000000, size 24, enabled pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI0.LK3E:0) pci_link6: Picked IRQ 18 with weight 0 ioapic0: Changing polarity for pin 18 to high pcib0: slot 5 INTA routed to irq 18 via \\_SB_.PCI0.LK3E found-> vendor=0x10de, dev=0x0270, revid=0xa2 domain=0, bus=0, slot=9, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0260, revid=0xa3 domain=0, bus=0, slot=10, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type I/O Port, range 32, base 0x1d00, size 7, enabled found-> vendor=0x10de, dev=0x0264, revid=0xa3 domain=0, bus=0, slot=10, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x3040, size 6, enabled map[24]: type I/O Port, range 32, base 0x3000, size 6, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LSMB:0) ioapic0: Changing trigger for pin 10 to level pcib0: slot 10 INTA routed to irq 10 via \\_SB_.PCI0.LSMB found-> vendor=0x10de, dev=0x0271, revid=0xa3 domain=0, bus=0, slot=10, func=3 class=0b-40-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=10 map[10]: type Memory, range 32, base 0xb0040000, size 18, enabled pcib0: matched entry for 0.10.INTB (src \\_SB_.PCI0.LPMU:0) pci_link9: Picked IRQ 9 with weight 0 ioapic0: Changing polarity for pin 9 to high pcib0: slot 10 INTB routed to irq 9 via \\_SB_.PCI0.LPMU found-> vendor=0x10de, dev=0x026d, revid=0xa3 domain=0, bus=0, slot=11, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xb0004000, size 12, enabled pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LUS0:0) pci_link10: Picked IRQ 22 with weight 0 ioapic0: Changing polarity for pin 22 to high pcib0: slot 11 INTA routed to irq 22 via \\_SB_.PCI0.LUS0 found-> vendor=0x10de, dev=0x026e, revid=0xa3 domain=0, bus=0, slot=11, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xb0005000, size 8, enabled pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.LUS2:0) pci_link11: Picked IRQ 22 with weight 1 pcib0: slot 11 INTB routed to irq 22 via \\_SB_.PCI0.LUS2 found-> vendor=0x10de, dev=0x0265, revid=0xf1 domain=0, bus=0, slot=13, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x3080, size 4, enabled found-> vendor=0x10de, dev=0x0266, revid=0xf1 domain=0, bus=0, slot=14, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x30c0, size 3, enabled map[14]: type I/O Port, range 32, base 0x30b4, size 2, enabled map[18]: type I/O Port, range 32, base 0x30b8, size 3, enabled map[1c]: type I/O Port, range 32, base 0x30b0, size 2, enabled map[20]: type I/O Port, range 32, base 0x3090, size 4, enabled map[24]: type Memory, range 32, base 0xb0006000, size 12, memory disabled pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.LTID:0) pci_link17: Picked IRQ 23 with weight 0 ioapic0: Changing polarity for pin 23 to high pcib0: slot 14 INTA routed to irq 23 via \\_SB_.PCI0.LTID found-> vendor=0x10de, dev=0x026f, revid=0xa2 domain=0, bus=0, slot=16, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns) found-> vendor=0x10de, dev=0x026c, revid=0xa2 domain=0, bus=0, slot=16, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks map[10]: type Memory, range 32, base 0xb0000000, size 14, enabled pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LAZA:0) pci_link13: Picked IRQ 21 with weight 0 ioapic0: Changing polarity for pin 21 to high pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.LAZA found-> vendor=0x10de, dev=0x0269, revid=0xa3 domain=0, bus=0, slot=20, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xb0008000, size 12, enabled map[14]: type I/O Port, range 32, base 0x30e0, size 3, enabled pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.LMAC:0) pci_link12: Picked IRQ 20 with weight 0 ioapic0: Changing polarity for pin 20 to high pcib0: slot 20 INTA routed to irq 20 via \\_SB_.PCI0.LMAC found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 0.3 (no driver attached) pci0: at device 0.4 (no driver attached) pci0: at device 0.5 (no driver attached) pci0: at device 0.6 (no driver attached) pci0: at device 0.7 (no driver attached) pcib1: at device 2.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x4000-0x4fff pcib1: memory decode 0xb4000000-0xb5ffffff pcib1: prefetched decode 0xd0000000-0xd01fffff pci1: on pcib1 pci1: domain=0, physical bus=1 pcib2: at device 3.0 on pci0 pcib2: domain 0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xb6000000-0xb7ffffff pcib2: no prefetched decode pci3: on pcib2 pci3: domain=0, physical bus=3 found-> vendor=0x14e4, dev=0x4311, revid=0x02 domain=0, bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xb6000000, size 14, enabled pcib2: requested memory range 0xb6000000-0xb6003fff: good pci3: at device 0.0 (no driver attached) vgapci0: mem 0xb2000000-0xb2ffffff,0xc0000000-0xcfffffff,0xb1000000-0xb1ffffff irq 18 at device 5.0 on pci0 pci0: at device 9.0 (no driver attached) isab0: port 0x1d00-0x1d7f at device 10.0 on pci0 isa0: on isab0 pci0: at device 10.1 (no driver attached) pci0: at device 10.3 (no driver attached) ohci0: mem 0xb0004000-0xb0004fff irq 22 at device 11.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0004000 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 49 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: on ohci0 ehci0: mem 0xb0005000-0xb00050ff irq 22 at device 11.1 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xb0005000 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: on ehci0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at device 13.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3080 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=10 stat1=01 devices=0x10000 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 50 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 51 ata1: [MPSAFE] ata1: [ITHREAD] atapci1: port 0x30c0-0x30c7,0x30b4-0x30b7,0x30b8-0x30bf,0x30b0-0x30b3,0x3090-0x309f irq 23 at device 14.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3090 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Lazy allocation of 0x1000 bytes rid 0x24 type 3 at 0x80000000 ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30c0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30b4 ata2: SATA connect time=0ms ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30b8 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30b0 ata3: SATA connect status=00000000 ata3: [MPSAFE] ata3: [ITHREAD] pcib3: at device 16.0 on pci0 pcib3: domain 0 pcib3: secondary bus 7 pcib3: subordinate bus 7 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xb8000000-0xb80fffff pcib3: no prefetched decode pcib3: Subtractively decoded bridge. pci7: on pcib3 pci7: domain=0, physical bus=7 hdac0: mem 0xb0000000-0xb0003fff irq 21 at device 16.1 on pci0 hdac0: HDA Driver Revision: 20090215_0128 hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xb0000000 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 53 hdac0: [MPSAFE] hdac0: [ITHREAD] nfe0: port 0x30e0-0x30e7 mem 0xb0008000-0xb0008fff irq 20 at device 20.0 on pci0 nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0008000 miibus0: on nfe0 rlphy0: PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nfe0: bpf attached nfe0: Ethernet address: 00:1b:24:68:7c:d7 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 54 nfe0: [MPSAFE] nfe0: [FILTER] acpi_tz0: on acpi0 atrtc0: port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 56 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 cpu0: on acpi0 cpu0: switching to generic Cx mode powernow0: on cpu0 cpu1: on acpi0 powernow1: on cpu1 ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xcf800-0xd0fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 uart0: failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 uart2: not probed (disabled) uart3: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 100458054 hz Timecounter "TSC" frequency 1908702688 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00010000 ata0: New devices: 00010000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 acpi_acad0: acline initialization start battery0: battery initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ugen0.1: at usbus0 ushub0: on usbus0 ugen1.1: at usbus1 ushub1: on usbus1 ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on nForce MCP51 chip acd0: DVDR drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 172KB/s (4134KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1: Identifying devices: 00000000 ata1: New devices: 00000000 ata2: Identifying devices: 00000001 ata2: New devices: 00000001 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad4: 152627MB at ata2-master SATA150 ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: nVidia check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00000000 ata3: New devices: 00000000 GEOM: ad4: partition 3 does not start on a track boundahdac0: Probing codec #0... hdac0: HDA Codec #0: Conexant CX20549 (Venice) hdac0: HDA Codec ID: 0x14f15045 hdac0: Vendor: 0x14f1 hdac0: Device: 0x5045 hdac0: Revision: 0x01 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x30b7103c hdac0: Found audio FG nid=1 startnode=16 endnode=28 total=12 hdac0: Found modem FG nid=2 startnode=112 endnode=116 total=4 hdac0: hdac0: Processing audio FG cad=0 nid=1... hdac0: GPIO: 0x00000000 NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 hdac0: nid 16 0x95170110 as 1 seq 0 Speaker Fixed jack 7 loc 21 color Unknown misc 1 hdac0: nid 17 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0 hdac0: nid 18 0x40a190f0 as 15 seq 0 Mic None jack 1 loc 0 color Pink misc 0 hdac0: nid 19 0x22451130 as 3 seq 0 SPDIF-out Jack jack 5 loc 34 color Black misc 1 hdac0: nid 20 0x02a79120 as 2 seq 0 Mic Jack jack 7 loc 2 color Pink misc 1 hdac0: nid 21 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 hdac0: Patched pins configuration: hdac0: nid 16 0x95170110 as 1 seq 0 Speaker Fixed jack 7 loc 21 color Unknown misc 1 hdac0: nid 17 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0 hdac0: nid 18 0x40a190f0 as 15 seq 0 Mic None jack 1 loc 0 color Pink misc 0 [DISABLED] hdac0: nid 19 0x22451130 as 3 seq 0 SPDIF-out Jack jack 5 loc 34 color Black misc 1 hdac0: nid 20 0x02a79120 as 2 seq 0 Mic Jack jack 7 loc 2 color Pink misc 1 hdac0: nid 21 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 [DISABLED] hdac0: 3 associations found: hdac0: Association 0 (1) out: hdac0: Pin nid=16 seq=0 hdac0: Pin nid=17 seq=15 hdac0: Association 1 (2) in: hdac0: Pin nid=20 seq=0 hdac0: Association 2 (3) out: hdac0: Pin nid=19 seq=0 hdac0: Tracing association 0 (1) hdac0: Pin 16 traced to DAC 25 hdac0: Pin 17 traced to DAC 25 and hpredir 0 hdac0: Association 0 (1) trace succeeded hdac0: Tracing association 1 (2) hdac0: Pin 20 traced to ADC 26 hdac0: Association 1 (2) trace succeeded hdac0: Tracing association 2 (3) hdac0: Pin 19 traced to DAC 24 hdac0: Association 2 (3) trace succeeded hdac0: Tracing input monitor hdac0: Tracing nid 23 to out hdac0: nid 23 is input monitor hdac0: Tracing beeper hdac0: Enabling headphone/speaker audio routing switching: hdac0: as=0 sense nid=17 [UNSOL] hdac0: Pin sense: nid=17 res=0x7fffffff hdac0: FG config/quirks: ivref50 ivref80 ivref100 ivref hdac0: hdac0: +-------------------+ hdac0: | DUMPING HDA NODES | hdac0: +-------------------+ hdac0: hdac0: Default Parameter hdac0: ----------------- hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e0140 hdac0: 16 20 24 bits, 48 96 KHz hdac0: IN amp: 0x00000000 hdac0: OUT amp: 0x00000000 hdac0: hdac0: nid: 16 hdac0: Name: pin: Speaker (Fixed) hdac0: Widget cap: 0x0040058d hdac0: PWR UNSOL STEREO hdac0: Association: 0 (0x00000001) hdac0: Pin cap: 0x00010014 hdac0: PDC OUT EAPD hdac0: Pin config: 0x95170110 hdac0: Pin control: 0x00000040 OUT hdac0: EAPD: 0x00000002 hdac0: Output amp: 0x80052b2b hdac0: mute=1 step=43 size=5 offset=43 hdac0: connections: 2 hdac0: | hdac0: + <- nid=25 [audio output] (selected) hdac0: + [DISABLED] <- nid=23 [audio mixer] hdac0: hdac0: nid: 17 hdac0: Name: pin: Headphones (Black Jack) hdac0: Widget cap: 0x0040058d hdac0: PWR UNSOL STEREO hdac0: Association: 0 (0x00008000) hdac0: Pin cap: 0x0000113c hdac0: PDC HP OUT IN VREF[ 80 HIZ ] hdac0: Pin config: 0x0221101f hdac0: Pin control: 0x000000c0 HP OUT hdac0: Output amp: 0x80052b2b hdac0: mute=1 step=43 size=5 offset=43 hdac0: connections: 2 hdac0: | hdac0: + <- nid=25 [audio output] (selected) hdac0: + [DISABLED] <- nid=23 [audio mixer] hdac0: hdac0: nid: 18 [DISABLED] hdac0: Name: pin: Mic (None) hdac0: Widget cap: 0x0040058d hdac0: PWR UNSOL STEREO hdac0: Pin cap: 0x0000113c hdac0: PDC HP OUT IN VREF[ 80 HIZ ] hdac0: Pin config: 0x40a190f0 hdac0: Pin control: 0x00000000 hdac0: Output amp: 0x80052b2b hdac0: mute=1 step=43 size=5 offset=43 hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=25 [audio output] (selected) hdac0: + <- nid=23 [audio mixer] hdac0: hdac0: nid: 19 hdac0: Name: pin: SPDIF-out (Black Jack) hdac0: Widget cap: 0x00400301 hdac0: DIGITAL STEREO hdac0: Association: 2 (0x00000001) hdac0: Pin cap: 0x00000010 hdac0: OUT hdac0: Pin config: 0x22451130 hdac0: Pin control: 0x00000040 OUT hdac0: connections: 1 hdac0: | hdac0: + <- nid=24 [audio output] hdac0: hdac0: nid: 20 hdac0: Name: pin: Mic (Pink Jack) hdac0: Widget cap: 0x00400081 hdac0: UNSOL STEREO hdac0: Association: 1 (0x00000001) hdac0: OSS: mic (mic) hdac0: Pin cap: 0x00001124 hdac0: PDC IN VREF[ 80 HIZ ] hdac0: Pin config: 0x02a79120 hdac0: Pin control: 0x00000024 IN VREFs hdac0: hdac0: nid: 21 [DISABLED] hdac0: Name: pin: Line-out (None) hdac0: Widget cap: 0x00400001 hdac0: STEREO hdac0: Pin cap: 0x00000020 hdac0: IN hdac0: Pin config: 0x400001f0 hdac0: Pin control: 0x00000000 hdac0: hdac0: nid: 22 hdac0: Name: beep widget hdac0: Widget cap: 0x0070000c hdac0: Association: -2 (0x00000000) hdac0: OSS: speaker (speaker) hdac0: Output amp: 0x800b0707 hdac0: mute=1 step=7 size=11 offset=7 hdac0: hdac0: nid: 23 hdac0: Name: audio mixer hdac0: Widget cap: 0x0020050b hdac0: PWR STEREO hdac0: Association: -2 (0x00000001) hdac0: OSS: mix (mix) hdac0: Input amp: 0x80052b14 hdac0: mute=1 step=43 size=5 offset=20 hdac0: connections: 5 hdac0: | hdac0: + <- nid=25 [audio output] hdac0: + <- nid=20 [pin: Mic (Pink Jack)] hdac0: + [DISABLED] <- nid=18 [pin: Mic (None)] [DISABLED] hdac0: + [DISABLED] <- nid=17 [pin: Headphones (Black Jack)] hdac0: + [DISABLED] <- nid=21 [pin: Line-out (None)] [DISABLED] hdac0: hdac0: nid: 24 hdac0: Name: audio output hdac0: Widget cap: 0x00000211 hdac0: DIGITAL STEREO hdac0: Association: 2 (0x00000001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x00060040 hdac0: 16 20 bits, 48 KHz hdac0: hdac0: nid: 25 hdac0: Name: audio output hdac0: Widget cap: 0x00000c11 hdac0: LRSWAP PWR STEREO hdac0: Association: 0 (0x00008001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e0540 hdac0: 16 20 24 bits, 48 96 192 KHz hdac0: hdac0: nid: 26 hdac0: Name: audio input hdac0: Widget cap: 0x00100d0b hdac0: LRSWAP PWR STEREO hdac0: Association: 1 (0x00000001) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e0140 hdac0: 16 20 24 bits, 48 96 KHz hdac0: Input amp: 0x80051700 hdac0: mute=1 step=23 size=5 offset=0 hdac0: connections: 5 hdac0: | hdac0: + <- nid=23 [audio mixer] (selected) hdac0: + <- nid=20 [pin: Mic (Pink Jack)] hdac0: + [DISABLED] <- nid=18 [pin: Mic (None)] [DISABLED] hdac0: + [DISABLED] <- nid=17 [pin: Headphones (Black Jack)] hdac0: + [DISABLED] <- nid=21 [pin: Line-out (None)] [DISABLED] hdac0: hdac0: nid: 27 [DISABLED] hdac0: Name: vendor widget hdac0: Widget cap: 0x00f00000 hdac0: hdac0: Processing modem FG cad=0 nid=2... hdac0: pcm0: at cad 0 nid 1 on hdac0 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e0540 pcm0: 16 20 24 bits, 48 96 192 KHz pcm0: DAC: 25 pcm0: pcm0: Record: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e0140 pcm0: 16 20 24 bits, 48 96 KHz pcm0: ADC: 26 pcm0: pcm0: +--------------------------------+ pcm0: | DUMPING Playback/Record Pathes | pcm0: +--------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: nid=16 [pin: Speaker (Fixed)] pcm0: | pcm0: + <- nid=25 [audio output] [src: pcm] pcm0: pcm0: nid=17 [pin: Headphones (Black Jack)] pcm0: | pcm0: + <- nid=25 [audio output] [src: pcm] pcm0: pcm0: Record: pcm0: pcm0: nid=26 [audio input] pcm0: | pcm0: + <- nid=23 [audio mixer] [src: mix] pcm0: + <- nid=20 [pin: Mic (Pink Jack)] [src: mic] pcm0: pcm0: Input Mix: pcm0: pcm0: nid=23 [audio mixer] pcm0: | pcm0: + <- nid=25 [audio output] [src: pcm] pcm0: + <- nid=20 [pin: Mic (Pink Jack)] [src: mic] pcm0: pcm0: +-------------------------+ pcm0: | DUMPING Volume Controls | pcm0: +-------------------------+ pcm0: pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- ctl 1 (nid 16 in ): -64/0dB (44 steps) + mute pcm0: +- ctl 2 (nid 17 in ): -64/0dB (44 steps) + mute pcm0: pcm0: PCM Volume (OSS: pcm) pcm0: | pcm0: +- ctl 1 (nid 16 in ): -64/0dB (44 steps) + mute pcm0: +- ctl 2 (nid 17 in ): -64/0dB (44 steps) + mute pcm0: +- ctl 5 (nid 23 in 0): -30/34dB (44 steps) + mute pcm0: pcm0: Microphone Volume (OSS: mic) pcm0: | pcm0: +- ctl 6 (nid 23 in 1): -30/34dB (44 steps) + mute pcm0: pcm0: Speaker/Beep Volume (OSS: speaker) pcm0: | pcm0: +- ctl 4 (nid 22 out): -21/0dB (8 steps) + mute pcm0: pcm0: Recording Level (OSS: rec) pcm0: | pcm0: +- ctl 10 (nid 26 in 0): 0/34dB (24 steps) + mute pcm0: pcm0: Input Mix Level (OSS: mix) pcm0: | pcm0: +- ctl 10 (nid 26 in 0): 0/34dB (24 steps) + mute pcm0: pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "mic": pcm0: Mixer "mix": pcm0: Mixer "rec": pcm0: Mixer "ogain": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 1170000, 4000; 0xfffffffe6c124000 -> 1170000 pcm0: sndbuf_setmap 2710000, 4000; 0xfffffffe6c134000 -> 2710000 pcm1: at cad 0 nid 1 on hdac0 pcm1: +--------------------------------------+ pcm1: | DUMPING PCM Playback/Record Channels | pcm1: +--------------------------------------+ pcm1: pcm1: Playback: pcm1: pcm1: Stream cap: 0x00000005 pcm1: AC3 PCM pcm1: PCM cap: 0x00060040 pcm1: 16 20 bits, 48 KHz pcm1: DAC: 24 pcm1: pcm1: +--------------------------------+ pcm1: | DUMPING Playback/Record Pathes | pcm1: +--------------------------------+ pcm1: pcm1: Playback: pcm1: pcm1: nid=19 [pin: SPDIF-out (Black Jack)] pcm1: | pcm1: + <- nid=24 [audio output] [src: pcm] pcm1: pcm1: +-------------------------+ pcm1: | DUMPING Volume Controls | pcm1: +-------------------------+ pcm1: pcm1: clone manager: deadline=750ms flags=0x8000001e pcm1: sndbuf_setmap 2730000, 4000; 0xfffffffe6c144000 -> 2730000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 50 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 1 vector 51 WARNING: WITNESS option enabled, expect reduced performance. ry. GEOM: ad4: partition 3 does not end on a track boundary. GEOM: ad4: partition 1 does not end on a track boundary. battery0: battery initialization done, tried 1 times GEOM_LABEL: Label for provider ad4s2 is ntfs/HP_RECOVERY. GEOM: ad4s4: geometry does not match label (255h,63s != 16h,63s). ushub0: 8 ports with 8 removable, self powered GEOM_CONCAT: Device export created (id=3382027346). GEOM_CONCAT: Disk ad4s3f attached to export. GEOM_CONCAT: Disk ad4s4f attached to export. GEOM_CONCAT: Device export activated. Root mount waiting for: usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 ushub1: 8 ports with 8 removable, self powered Root mount waiting for: usbus1 Root mount waiting for: usbus1 ugen0.2: at usbus0 ushub2: on usbus0 ugen1.2: at usbus1 Trying to mount root from ufs:/dev/ad4s3a ct_to_ts([2009-02-25 21:06:49]) = 1235596009.000000000 start_init: trying /sbin/init ushub2: 4 ports with 4 removable, bus powered ugen0.3: at usbus0 ukbd0: on usbus0 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 crypto: cryptosoft0: on motherboard crypto: assign cryptosoft0 driver id 0, flags 100663296 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 ugen0.4: at usbus0 ums0: on usbus0 ums0: 3 buttons and [XYZ] coordinates Symlink: ums0 -> usb0.4.0.16 GEOM_ELI: Device concat/export.eli created. GEOM_ELI: Encryption: AES-CBC 128 GEOM_ELI: Crypto: software GEOM_JOURNAL: Journal 578595679: concat/export.eli contains data. GEOM_JOURNAL: Journal 578595679: ad4s4g contains journal. GEOM_JOURNAL: Journal concat/export.eli clean. WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD. WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD. md0.uzip: 16384 x 65536 blocks module_register: module ushub/ums already exists! Module ushub/ums failed to register: 17 lock order reversal: 1st 0xfffffffe5db783f8 bufwait (bufwait) @ /usr/src/head/sys/kern/vfs_bio.c:2443 2nd 0xffffff0002d25a00 dirhash (dirhash) @ /usr/src/head/sys/ufs/ufs/ufs_dirhash.c:275 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a _witness_debugger() at _witness_debugger+0x2e witness_checkorder() at witness_checkorder+0x81e _sx_xlock() at _sx_xlock+0x55 ufsdirhash_acquire() at ufsdirhash_acquire+0x33 ufsdirhash_add() at ufsdirhash_add+0x19 ufs_direnter() at ufs_direnter+0x88b ufs_makeinode() at ufs_makeinode+0x338 VOP_CREATE_APV() at VOP_CREATE_APV+0x8d null_bypass() at null_bypass+0xd3 VOP_CREATE_APV() at VOP_CREATE_APV+0xa6 vn_open_cred() at vn_open_cred+0x479 kern_openat() at kern_openat+0x169 syscall() at syscall+0x1dd Xfast_syscall() at Xfast_syscall+0xab --- syscall (5, FreeBSD ELF64, open), rip = 0x80c39fdc, rsp = 0x7fffffffe1f8, rbp = 0xa --- pid 1110 (luit) is using legacy pty devices pid 1113 (luit) is using legacy pty devices pid 1111 (luit) is using legacy pty devices pid 1112 (luit) is using legacy pty devices pid 1114 (luit) is using legacy pty devices pid 1088 (xosview), uid 1000: exited on signal 11