Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #5: Wed Mar 11 22:11:15 GMT 2009 nick@pancake.internal.acquirer.com:/usr/src/sys/amd64/compile/PANCAKE WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8086d000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3010047111 Hz CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (3010.05-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff Features2=0x408e3fd AMD Features=0x20100800 AMD Features2=0x1 TSC: P-state invariant Cores per package: 2 usable memory = 8580993024 (8183 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000098fff, 622592 bytes (152 pages) 0x000000000089f000 - 0x00000000cff7ffff, 3480096768 bytes (849633 pages) 0x0000000100000000 - 0x0000000220a33fff, 4842536960 bytes (1182260 pages) avail memory = 8285020160 (7901 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP @ 0x0xfbbe0/0x0024 (v 2 ACPIAM) ACPI: XSDT @ 0x0xcff80100/0x005C (v 1 A_M_I_ OEMXSDT 0x11000820 MSFT 0x00000097) ACPI: FACP @ 0x0xcff80290/0x00F4 (v 3 A_M_I_ OEMFACP 0x11000820 MSFT 0x00000097) ACPI: DSDT @ 0x0xcff80440/0x8527 (v 1 A1121 A1121001 0x00000001 INTL 0x20051117) ACPI: FACS @ 0x0xcff8e000/0x0040 ACPI: APIC @ 0x0xcff80390/0x006C (v 1 A_M_I_ OEMAPIC 0x11000820 MSFT 0x00000097) ACPI: MCFG @ 0x0xcff80400/0x003C (v 1 A_M_I_ OEMMCFG 0x11000820 MSFT 0x00000097) ACPI: OEMB @ 0x0xcff8e040/0x0081 (v 1 A_M_I_ AMI_OEM 0x11000820 MSFT 0x00000097) ACPI: HPET @ 0x0xcff88970/0x0038 (v 1 A_M_I_ OEMHPET 0x11000820 MSFT 0x00000097) ACPI: OSFR @ 0x0xcff889b0/0x00B0 (v 1 A_M_I_ OEMOSFR 0x11000820 MSFT 0x00000097) ACPI: SSDT @ 0x0xcff8e5d0/0x0A7C (v 1 DpgPmm CpuPm 0x00000012 INTL 0x20051117) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00000400 kbd: new array size 4 kbd1 at kbdmux0 mem: null: random: io: acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.FHR0 -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cff00000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 15 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 14 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 14 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2e20, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2e21, revid=0x03 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a37, revid=0x00 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0xa800, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a38, revid=0x00 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=14 map[20]: type I/O Port, range 32, base 0xa880, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x3a39, revid=0x00 domain=0, bus=0, slot=26, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 map[20]: type I/O Port, range 32, base 0xac00, size 5, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3a3c, revid=0x00 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf7fffc00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3a3e, revid=0x00 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf7ff8000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x3a40, revid=0x00 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x3a42, revid=0x00 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a48, revid=0x00 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x3a4a, revid=0x00 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a34, revid=0x00 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 map[20]: type I/O Port, range 32, base 0xa080, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x3a35, revid=0x00 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0xa400, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a36, revid=0x00 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 map[20]: type I/O Port, range 32, base 0xa480, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3a3a, revid=0x00 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf7fff800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0x90 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3a18, revid=0x00 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3a22, revid=0x00 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0x9c00, size 3, enabled map[14]: type I/O Port, range 32, base 0x9880, size 2, enabled map[18]: type I/O Port, range 32, base 0x9800, size 3, enabled map[1c]: type I/O Port, range 32, base 0x9480, size 2, enabled map[20]: type I/O Port, range 32, base 0x9400, size 5, enabled map[24]: type Memory, range 32, base 0xf7ffe800, size 11, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a30, revid=0x00 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 map[10]: type Memory, range 64, base 0xf7fff400, size 8, enabled map[20]: type I/O Port, range 32, base 0x400, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 pcib1: irq 16 at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf8000000-0xfe7fffff pcib1: prefetched decode 0xd0000000-0xdfffffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0141, revid=0xa2 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xf8000000, size 26, enabled pcib1: requested memory range 0xf8000000-0xfbffffff: good map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[1c]: type Memory, range 64, base 0xfd000000, size 24, enabled pcib1: requested memory range 0xfd000000-0xfdffffff: good pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 vgapci0: mem 0xf8000000-0xfbffffff,0xd0000000-0xdfffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1 pci0: at device 26.0 (no driver attached) pci0: at device 26.1 (no driver attached) pci0: at device 26.2 (no driver attached) pci0: at device 26.7 (no driver attached) pci0: at device 27.0 (no driver attached) pcib2: irq 17 at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 5 pcib2: subordinate bus 5 pcib2: I/O decode 0xe000-0xefff pcib2: memory decode 0xfeb00000-0xfebfffff pcib2: no prefetched decode pci5: on pcib2 pci5: domain=0, physical bus=5 found-> vendor=0x8086, dev=0x10b9, revid=0x06 domain=0, bus=5, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfebe0000, size 17, enabled pcib2: requested memory range 0xfebe0000-0xfebfffff: good map[14]: type Memory, range 32, base 0xfebc0000, size 17, enabled pcib2: requested memory range 0xfebc0000-0xfebdffff: good map[18]: type I/O Port, range 32, base 0xec00, size 5, enabled pcib2: requested I/O range 0xec00-0xec1f: in range pcib2: matched entry for 5.0.INTA pcib2: slot 0 INTA hardwired to IRQ 16 em0: port 0xec00-0xec1f mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 16 at device 0.0 on pci5 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfebe0000 em0: attempting to allocate 1 MSI vectors (1 supported) em0: using IRQ 256 for MSI em0: Using MSI interrupt msi: Assigning MSI IRQ 256 to local APIC 0 vector 49 em0: [FILTER] em0: bpf attached em0: Ethernet address: 00:1b:21:32:1a:9e pcib3: irq 16 at device 28.1 on pci0 pcib3: domain 0 pcib3: secondary bus 4 pcib3: subordinate bus 4 pcib3: I/O decode 0xd000-0xdfff pcib3: memory decode 0xfea00000-0xfeafffff pcib3: no prefetched decode pci4: on pcib3 pci4: domain=0, physical bus=4 found-> vendor=0x197b, dev=0x2366, revid=0x02 domain=0, bus=4, slot=0, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xdc00, size 3, enabled pcib3: requested I/O range 0xdc00-0xdc07: in range map[14]: type I/O Port, range 32, base 0xd880, size 2, enabled pcib3: requested I/O range 0xd880-0xd883: in range map[18]: type I/O Port, range 32, base 0xd800, size 3, enabled pcib3: requested I/O range 0xd800-0xd807: in range map[1c]: type I/O Port, range 32, base 0xd480, size 2, enabled pcib3: requested I/O range 0xd480-0xd483: in range map[20]: type I/O Port, range 32, base 0xd400, size 4, enabled pcib3: requested I/O range 0xd400-0xd40f: in range map[24]: type Memory, range 32, base 0xfeafe000, size 13, enabled pcib3: requested memory range 0xfeafe000-0xfeafffff: good pcib3: matched entry for 4.0.INTA pcib3: slot 0 INTA hardwired to IRQ 17 atapci0: port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeafe000-0xfeafffff irq 17 at device 0.0 on pci4 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd400 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 50 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfeafe000 atapci0: AHCI called from vendor specific driver atapci0: AHCI Version 01.00 controller with 2 ports PM supported ata2: on atapci0 ata2: AHCI reset... ata2: SATA connect status=00000000 ata2: AHCI reset done: phy reset found no device ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 ata3: AHCI reset... ata3: SATA connect time=0ms ata3: ready wait time=0ms ata3: software reset port 15... ata3: ready wait time=0ms ata3: SIGNATURE: 96690101 ata3: Portmultiplier (id=47261095 rev=1f06) with 7 ports ata3: p0: connect status=00000000 ata3: p1: connect time 0ms ata3: software reset port 1... ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001 ata3: software reset set timeout ata3: p1: SIGNATURE=ffffffff ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001 ata3: error writing PM port ata3: p2: writing ATA_SC_DET_RESET failed ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001 ata3: error writing PM port ata3: p3: writing ATA_SC_DET_RESET failed ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001 ata3: error writing PM port ata3: p4: writing ATA_SC_DET_RESET failed ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001 ata3: error writing PM port ata3: p5: writing ATA_SC_DET_RESET failed ata3: ahci_issue_cmd timeout: 100 of 100ms, status=00000001 ata3: error writing PM port ata3: p6: writing ATA_SC_DET_RESET failed ata3: AHCI reset done: devices=00008000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xdc00 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd880 ata4: reset tp1 mask=03 ostat0=60 ostat1=70 ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata4: reset tp2 stat0=20 stat1=30 devices=0x0 ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd800 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd480 ata5: reset tp1 mask=03 ostat0=60 ostat1=70 ata5: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata5: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata5: reset tp2 stat0=20 stat1=30 devices=0x0 ata5: [MPSAFE] ata5: [ITHREAD] pcib4: irq 17 at device 28.4 on pci0 pcib4: domain 0 pcib4: secondary bus 3 pcib4: subordinate bus 3 pcib4: I/O decode 0xc000-0xcfff pcib4: memory decode 0xfe900000-0xfe9fffff pcib4: no prefetched decode pci3: on pcib4 pci3: domain=0, physical bus=3 found-> vendor=0x11ab, dev=0x6101, revid=0xb2 domain=0, bus=3, slot=0, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0xcc00, size 3, enabled pcib4: requested I/O range 0xcc00-0xcc07: in range map[14]: type I/O Port, range 32, base 0xc880, size 2, enabled pcib4: requested I/O range 0xc880-0xc883: in range map[18]: type I/O Port, range 32, base 0xc800, size 3, enabled pcib4: requested I/O range 0xc800-0xc807: in range map[1c]: type I/O Port, range 32, base 0xc480, size 2, enabled pcib4: requested I/O range 0xc480-0xc483: in range map[20]: type I/O Port, range 32, base 0xc400, size 4, enabled pcib4: requested I/O range 0xc400-0xc40f: in range map[24]: type Memory, range 32, base 0xfe9ffc00, size 9, enabled pcib4: requested memory range 0xfe9ffc00-0xfe9ffdff: good pcib4: matched entry for 3.0.INTA pcib4: slot 0 INTA hardwired to IRQ 16 atapci1: port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f mem 0xfe9ffc00-0xfe9ffdff irq 16 at device 0.0 on pci3 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51 atapci1: [MPSAFE] atapci1: [ITHREAD] ata6: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc00 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc880 ata6: reset tp1 mask=03 ostat0=50 ostat1=00 ata6: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata6: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata6: reset tp2 stat0=00 stat1=00 devices=0x10000 ata6: [MPSAFE] ata6: [ITHREAD] pcib5: irq 16 at device 28.5 on pci0 pcib5: domain 0 pcib5: secondary bus 2 pcib5: subordinate bus 2 pcib5: I/O decode 0xb000-0xbfff pcib5: memory decode 0xfe800000-0xfe8fffff pcib5: prefetched decode 0xf6f00000-0xf6ffffff pci2: on pcib5 pci2: domain=0, physical bus=2 found-> vendor=0x10ec, dev=0x8168, revid=0x02 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0xb800, size 8, enabled pcib5: requested I/O range 0xb800-0xb8ff: in range map[18]: type Prefetchable Memory, range 64, base 0xf6fff000, size 12, enabled pcib5: requested memory range 0xf6fff000-0xf6ffffff: good map[20]: type Prefetchable Memory, range 64, base 0xf6fe0000, size 16, enabled pcib5: requested memory range 0xf6fe0000-0xf6feffff: good pcib5: matched entry for 2.0.INTA pcib5: slot 0 INTA hardwired to IRQ 17 pci2: at device 0.0 (no driver attached) pci0: at device 29.0 (no driver attached) pci0: at device 29.1 (no driver attached) pci0: at device 29.2 (no driver attached) pci0: at device 29.7 (no driver attached) pcib6: at device 30.0 on pci0 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0x0-0x0 pcib6: no prefetched decode pcib6: Subtractively decoded bridge. pci6: on pcib6 pci6: domain=0, physical bus=6 isab0: at device 31.0 on pci0 isa0: on isab0 atapci2: port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x941f mem 0xf7ffe800-0xf7ffefff irq 19 at device 31.2 on pci0 atapci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x9400 atapci2: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf7ffe800 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: AHCI Version 01.20 controller with 6 ports PM supported ata7: on atapci2 ata7: AHCI reset... ata7: SATA connect time=0ms ata7: ready wait time=36ms ata7: software reset port 15... ata7: ready wait time=0ms ata7: SIGNATURE: 00000101 ata7: AHCI reset done: devices=00000001 ata7: [MPSAFE] ata7: [ITHREAD] ata8: on atapci2 ata8: AHCI reset... ata8: SATA connect status=00000000 ata8: AHCI reset done: phy reset found no device ata8: [MPSAFE] ata8: [ITHREAD] ata9: on atapci2 ata9: AHCI reset... ata9: SATA connect status=00000000 ata9: AHCI reset done: phy reset found no device ata9: [MPSAFE] ata9: [ITHREAD] ata10: on atapci2 ata10: AHCI reset... ata10: SATA connect status=00000000 ata10: AHCI reset done: phy reset found no device ata10: [MPSAFE] ata10: [ITHREAD] ata11: on atapci2 ata11: AHCI reset... ata11: SATA connect status=00000000 ata11: AHCI reset done: phy reset found no device ata11: [MPSAFE] ata11: [ITHREAD] ata12: on atapci2 ata12: AHCI reset... ata12: SATA connect status=00000000 ata12: AHCI reset done: phy reset found no device ata12: [MPSAFE] ata12: [ITHREAD] pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 53 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ cpu0: on acpi0 ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - A5, should be A4 [20070320] ACPI: SSDT @ 0x0xcff8e0d0/0x0277 (v 1 DpgPmm P001Ist 0x00000011 INTL 0x20051117) cpu0: switching to generic Cx mode est0: on cpu0 est0: Invalid id16 (set, cur) = (2078, 2337) est0: Invalid freq 2670, ignored. est0: Invalid id16 (set, cur) = (1818, 2337) est0: Invalid freq 2336, ignored. est0: Invalid id16 (set, cur) = (1558, 2337) est0: Invalid freq 2003, ignored. p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616092106000921 device_attach: est1 attach returned 6 p4tcc1: on cpu1 isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xd2000-0xd47ff on isa0 fb: new array size 4 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 uart1 failed to probe at port 0x2f8 irq 3 on isa0 uart2: not probed (disabled) uart3: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 514175 -> 100000 lapic: Divisor 2, Frequency 167224845 hz Timecounter "TSC" frequency 3010047111 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached ata2: Identifying devices: 00000000 ata2: New devices: 00000000 ata3: Identifying devices: 00008000 ata3: New devices: 00008000 ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000000 ata5: New devices: 00000000 ata6: Identifying devices: 00010000 ata6: New devices: 00010000 ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire acd0: DVDR drive at ata6 as master acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata7: Identifying devices: 00000001 ata7: New devices: 00000001 ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad14: 1430799MB at ata7-master SATA300 ad14: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad14 ad14: Intel check1 failed ad14: Adaptec check1 failed ad14: LSI (v3) check1 failed ad14: LSI (v2) check1 failed ad14: FreeBSD check1 failed ata8: Identifying devices: 00000000 ata8: New devices: 00000000 ata9: Identifying devices: 00000000 ata9: New devices: 00000000 ata10: Identifying devices: 00000000 ata10: New devices: 00000000 ata11: Identifying devices: 00000000 ata11: New devices: 00000000 ata12: Identifying devices: 00000000 ata12: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 ioapic0: routingG EiOnMt:p ina d91 4(s1I:S Ag eIoRmQe t9r)y tdoo elsa pnioct 1m avteccht olra b4e8l (2i5o5ahp,i6c30s: !r=o u1t6ihn,g6 3isn)t.pi n 17 (PCI IRQ 17) to lapic 1 vector 49 msi: Assigning MSI IRQ 256 to local APIC 1 vector 50 WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ad10s1a Manual root filesystem specification: : Mount using filesystem eg. ufs:da0s1a ? List valid disk boot devices Abort manual input mountroot> ufs:ad14s1a Trying to mount root from ufs:ad14s1a ct_to_ts([2009-03-12 11:00:03]) = 1236855603.000000000 start_init: trying /sbin/init em0: Link is up 1000 Mbps Full Duplex splash: image decoder found: blank_saver