Re: ATA problems on Promise controller

From: Friedemann Becker <friedemann.becker_at_student.uni-tuebingen.de>
Date: Sun, 6 Apr 2003 00:14:31 +0200 (CEST)
try hw.ata.ata_dma="0" in /boot/loader.conf to disable DMA, it is
currently broken but worked on

On Sat, 5 Apr 2003, Paul van der Zwan wrote:

> With a -current kernel ( cvsupped today ) I can no longer boot.
> It hangs on the drives connected to the promis controller built into my
> MSI KT266 mobo.
> The messages are like
>
> ad2: READ command timeout tag=0 serv=0 - resetting
>
> Same for ad3. It tries falling back to pio mode but after that it hangs
> completely.
> I have tried putting hw.at.tags=0 in /boot/loader.conf as suggested in
> some older messages on this list but that dit not help.
Received on Sat Apr 05 2003 - 12:14:35 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:02 UTC