Re: Problem using USB 2.0 device under -CURRENT

From: Craig Boston <craig_at_xfoil.gank.org>
Date: Mon, 11 Aug 2003 11:26:38 -0500
On Monday 11 August 2003 11:04 am, Joe Marcus Clarke wrote:
> ehci0_at_pci0:29:7:        class=0x0c0320 card=0x015f1028 chip=0x24cd8086
> rev=0x03
> hdr=0x00
>     vendor   = 'Intel Corporation'
>     device   = '82801DB (ICH4) USB EHCI Controller'
>     class    = serial bus
>     subclass = USB

I have the same hardware (0x24cd8086) on a Dell-branded board with the same 
results.  I think so far only the NEC-based EHCI controllers are verified to 
work -- I don't know of anyone who has had success with the Intel ones.

> I haven't tried applying the patch to get it detected as an actual Intel
> controller, but I'm not sure that would help.

It doesn't.  It makes the probe message prettier but I get the same problem 
(unrecoverable error).  If you have time, could you try compiling with 
"options USB_DEBUG" and setting the sysctl hw.usb.debug=3 and 
hw.usb.ehci.debug=6 ?  Be warned that that will generate a LOT of debug 
output.

Craig
Received on Mon Aug 11 2003 - 07:26:44 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:18 UTC