(unknown charset) Re: problems with wi driver.

On Wed, Aug 13, 2003 at 01:44:15PM +0200, Robert Blacquière wrote:
> Hi,
> 
> I have some problems getting wi cards working. I've traced the behavour
> of it. 
> 
> It assigns the first io memory 0x100-0x13f and the card fails to work. 
> I plugin a second wi card and it gets 0x180-0x1bf and the card works.
> 
> I've 2 different cards one ASUS spacelink Prism 2.5 card and a Lucent
> Orinoco Gold card. It does not matter which sequence i follow the first
> card will fail but the second works. 
> 
> some debug info:
> 
<snip>

Hi, 

I fixed it somehow illegal by changing the src/sys/dev/pccbb/pccbb.c 


line 121: #define CBB_START_16_IO 0x100 

to 

#define CBB_START_16_IO 0x140 

And now my wireless cards work. 

Is there a better way to toggle the start address  for 16 bit and 32 bit
cards with sysctl??



dmesg output with debug info:

CBB EVENT 0x6
Waking up thread
Status is 0x30000510
cbb0: card inserted: event=0x00000000, state=30000510
cbb_pcic_socket_enable:
cbb0: cbb_power: 5V
start (30000000) < sc->membase (40000000)
end (ffffffff) > sc->memlimit (403fffff)
pcib2: device pccard0 requested decoded memory range
0x30000000-0xffffffff
pccard0: CIS version PC Card Standard 5.0
pccard0: CIS info: Lucent Technologies, WaveLAN/IEEE, Version 01.01, 
pccard0: Manufacturer code 0x156, product 0x2
pccard0: function 0: network adapter, ccr addr 3e0 mask 1
pccard0: function 0, config table entry 1: I/O card; irq mask ffff;
iomask 6, io
space 0-3f; io16 irqpulse irqlevel
pcib2: device pccard0 requested decoded I/O range 0x140-0xffffffff
cbb_pcic_socket_enable:
cbb0: cbb_power: 0V
cbb0: cbb_power: 5V
start (30000000) < sc->membase (40000000)
end (ffffffff) > sc->memlimit (403fffff)
pcib2: device pccard0 requested decoded memory range
0x30000000-0xffffffff
wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x180-0x1bf irq 11
function 0 co
nfig 1 on pccard0
pcib2: device wi0 requested decoded I/O range 0x180-0x1bf
pcib2: device pccard0 requested decoded I/O range 0x180-0x1bf
pcib2: device wi0 requested decoded I/O range 0x180-0x1bf
wi0: 802.11 address: 00:02:2d:03:69:67
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (6.6.1)
wi0: bpf attached
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bad alloc 3e6 != ff, cur 0 nxt 0
acpi_acad0: acline initialization done, tried 7 times
acpi_tz0: _AC2: temperature 53.0 >= setpoint 40.0
acpi_tz0: switched from NONE to _AC2: 53.0C

Robert


-- 
Microsoft: Where do you want to go today?
Linux: Where do you want to go tomorrow?
FreeBSD: Are you guys coming or what?
OpenBSD: He guys you left some holes out there!