I've got three machines having trouble doing a installworld, let alone a buildworld. One is a Dell Inspiron 8100 with a GeForce which used to run just fine on a 5.1-RC, which I updated yesterday. Two are brand-new Shuttle SS51G with a SIS chipset and 2 GHz Celeron, which I installed on Friday, initially with 5.1-R, then cvsupped to -current. I did make world with CPUTYPE=p4, as I believed this would be innocent. However, I can't make world right now without CPUTYPE; I'll get to the office to reinstall 5.1-R and make world without CPUTYPE on one of them to later today, to see if that helps. Any other suggestions as to what could be the trouble? At this point I doubt it's hardware, as all three seemed to run just fine on 5.1. Thanks, Stefan Here's the dmesg from one of the Shuttle's: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Sat Aug 16 12:53:10 CEST 2003 root_at_lokschuppen.ZS64.NET:/usr/obj/usr/src/sys/EISENBOOT Preloaded elf kernel "/boot/kernel/kernel" at 0xc0532000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05321cc. Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Celeron(R) CPU 2.00GHz (2004.56-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 503250944 (479 MB) avail memory = 483217408 (460 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AWARD AWRDACPI> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00fde70 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x10c0-0x10ff,0x1000-0x10bf,0x480-0x48f,0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 2 INTC is routed to irq 11 pcib0: slot 3 INTA is routed to irq 10 pcib0: slot 3 INTB is routed to irq 11 pcib0: slot 3 INTC is routed to irq 9 pcib0: slot 3 INTD is routed to irq 5 pcib0: slot 15 INTA is routed to irq 11 pcib0: slot 16 INTA is routed to irq 12 agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 10 pcib1: slot 0 INTA is routed to irq 10 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 96X UDMA133 controller> port 0x4000-0x400f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <multimedia, audio> at device 2.7 (no driver attached) ohci0: <SiS 5571 USB controller> mem 0xec100000-0xec100fff irq 10 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xec101000-0xec101fff irq 11 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2: <SiS 5571 USB controller> mem 0xec102000-0xec102fff irq 9 at device 3.2 on pci0 usb2: OHCI version 1.0, legacy support usb2: <SiS 5571 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) rl0: <RealTek 8139 10/100BaseTX, rev. 8139D/8100B/8100C> port 0xe800-0xe8ff mem 0xec104000-0xec1040ff irq 11 at device 15.0 on pci0 rl0: Ethernet address: 00:30:1b:23:aa:7f miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fwohci0: <VIA VT6306> port 0xec00-0xec7f mem 0xec105000-0xec1057ff irq 12 at device 16.0 on pci0 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 8. fwohci0: EUI64 00:00:00:30:1b:27:f7:87 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 if_fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:00:00:27:f7:87 sbp0: <SBP2/SCSI over firewire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0x8800ffc0, gen=1, non CYCLEMASTER mode firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A orm0: <Option ROMs> at iomem 0xcc000-0xce7ff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2004556956 Hz Timecounters tick every 10.000 msec ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default IPsec: Initialized Security Association Processing. ad0: 114473MB <WDC WD1200BB-00DAA3> [232581/16/63] at ata0-master UDMA100 firewire0: split transaction timeout dst=0xffc1 tl=0x1 state=2 firewire0: bus manager election failed fw_xfer_free FWXF_START firewire0: split transaction timeout dst=0xffc1 tl=0x2 state=2 node1: resp=60 addr=0x400 fw_xfer_free FWXF_START probe failed for 1 node Mounting root from ufs:/dev/ad0s1a pid 13774 (install), uid 0: exited on signal 4 (core dumped) -- Stefan Bethke, Phone +49 170 346 0140 -- Stefan Bethke <s.bethke_at_tallence.com> Tallence GmbH, Steinhöft 11, D-20459 Hamburg, Germany Mobile +49 170 3460140, Office +49 40 36099860, Fax +49 40 36099869Received on Sun Aug 17 2003 - 06:28:53 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:19 UTC