Stefan, This is a FAQ. In the future, please search the archives before posting. At this moment in time, 'p4' isn't a safe CPUTYPE (It produces broken code). 'p3' or 'i686' are what's recommended for Pentium 4s. You'll also want to make sure that your CFLAGS don't use optimization higher than -O, as -O2 and -O3 have been the cause of odd behavior in the past with GCC3 (This might not apply to GCC 3.3.1 as I haven't had the time to do extensive regression testing, yet). Regards, > Andre Guibert de Bruet | Enterprise Software Consultant > > Silicon Landmark, LLC. | http://siliconlandmark.com/ > On Sun, 17 Aug 2003, Stefan Bethke wrote: > I've got three machines having trouble doing a installworld, let alone a > buildworld. > > One is a Dell Inspiron 8100 with a GeForce which used to run just fine on a > 5.1-RC, which I updated yesterday. > > Two are brand-new Shuttle SS51G with a SIS chipset and 2 GHz Celeron, which > I installed on Friday, initially with 5.1-R, then cvsupped to -current. > > I did make world with CPUTYPE=p4, as I believed this would be innocent. > However, I can't make world right now without CPUTYPE; I'll get to the > office to reinstall 5.1-R and make world without CPUTYPE on one of them to > later today, to see if that helps. > > Any other suggestions as to what could be the trouble? At this point I > doubt it's hardware, as all three seemed to run just fine on 5.1. > > > Thanks, > > Stefan > > > Here's the dmesg from one of the Shuttle's: > > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.1-CURRENT #0: Sat Aug 16 12:53:10 CEST 2003 > root_at_lokschuppen.ZS64.NET:/usr/obj/usr/src/sys/EISENBOOT > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0532000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05321cc. > Timecounter "i8254" frequency 1193182 Hz > CPU: Intel(R) Celeron(R) CPU 2.00GHz (2004.56-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC > A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > real memory = 503250944 (479 MB) > avail memory = 483217408 (460 MB) > Pentium Pro MTRR support enabled > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <AWARD AWRDACPI> on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 6 entries at 0xc00fde70 > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-fast" frequency 3579545 Hz > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_cpu1: <CPU> on acpi0 > acpi_tz0: <thermal zone> on acpi0 > acpi_button0: <Power Button> on acpi0 > acpi_button1: <Sleep Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port > 0x10c0-0x10ff,0x1000-0x10bf,0x480-0x48f,0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib0: slot 2 INTC is routed to irq 11 > pcib0: slot 3 INTA is routed to irq 10 > pcib0: slot 3 INTB is routed to irq 11 > pcib0: slot 3 INTC is routed to irq 9 > pcib0: slot 3 INTD is routed to irq 5 > pcib0: slot 15 INTA is routed to irq 11 > pcib0: slot 16 INTA is routed to irq 12 > agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device > 0.0 on pci0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pcib0: slot 1 INTA is routed to irq 10 > pcib1: slot 0 INTA is routed to irq 10 > pci1: <display, VGA> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 2.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <SiS 96X UDMA133 controller> port > 0x4000-0x400f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 2.5 > on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pci0: <multimedia, audio> at device 2.7 (no driver attached) > ohci0: <SiS 5571 USB controller> mem 0xec100000-0xec100fff irq 10 at device > 3.0 on pci0 > usb0: OHCI version 1.0, legacy support > usb0: <SiS 5571 USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > ohci1: <SiS 5571 USB controller> mem 0xec101000-0xec101fff irq 11 at device > 3.1 on pci0 > usb1: OHCI version 1.0, legacy support > usb1: <SiS 5571 USB controller> on ohci1 > usb1: USB revision 1.0 > uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > ohci2: <SiS 5571 USB controller> mem 0xec102000-0xec102fff irq 9 at device > 3.2 on pci0 > usb2: OHCI version 1.0, legacy support > usb2: <SiS 5571 USB controller> on ohci2 > usb2: USB revision 1.0 > uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > pci0: <serial bus, USB> at device 3.3 (no driver attached) > rl0: <RealTek 8139 10/100BaseTX, rev. 8139D/8100B/8100C> port 0xe800-0xe8ff > mem 0xec104000-0xec1040ff irq 11 at device 15.0 on pci0 > rl0: Ethernet address: 00:30:1b:23:aa:7f > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fwohci0: <VIA VT6306> port 0xec00-0xec7f mem 0xec105000-0xec1057ff irq 12 > at device 16.0 on pci0 > fwohci0: OHCI version 1.0 (ROM=1) > fwohci0: No. of Isochronous channel is 8. > fwohci0: EUI64 00:00:00:30:1b:27:f7:87 > fwohci0: Phy 1394a available S400, 3 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > if_fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:00:00:27:f7:87 > sbp0: <SBP2/SCSI over firewire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: BUS reset > fwohci0: node_id=0x8800ffc0, gen=1, non CYCLEMASTER mode > firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A, console > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > orm0: <Option ROMs> at iomem 0xcc000-0xce7ff,0xc0000-0xcbfff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x100> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 2004556956 Hz > Timecounters tick every 10.000 msec > ipfw2 initialized, divert disabled, rule-based forwarding enabled, default > to accept, logging limited to 100 packets/entry by default > IPsec: Initialized Security Association Processing. > ad0: 114473MB <WDC WD1200BB-00DAA3> [232581/16/63] at ata0-master UDMA100 > firewire0: split transaction timeout dst=0xffc1 tl=0x1 state=2 > firewire0: bus manager election failed > fw_xfer_free FWXF_START > firewire0: split transaction timeout dst=0xffc1 tl=0x2 state=2 > node1: resp=60 addr=0x400 > fw_xfer_free FWXF_START > probe failed for 1 node > Mounting root from ufs:/dev/ad0s1a > pid 13774 (install), uid 0: exited on signal 4 (core dumped) > > > > > > -- > Stefan Bethke, Phone +49 170 346 0140 > > > -- > Stefan Bethke <s.bethke_at_tallence.com> > Tallence GmbH, Steinhöft 11, D-20459 Hamburg, Germany > Mobile +49 170 3460140, Office +49 40 36099860, Fax +49 40 36099869 > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >Received on Sun Aug 17 2003 - 17:54:45 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:19 UTC