Don't know if anyone replied yet since I don't subscribe to freebsd-current, but I had to add the following line to my /boot/loader.conf file. hw.pci.allow_unsupported_io_range="1" Jack -----Original Message----- From: Tomi Vainio - Sun Finland [mailto:Tomi.Vainio_at_Sun.COM] Sent: Saturday, August 16, 2003 4:27 PM To: freebsd-current_at_freebsd.org; freebsd-mobile_at_freebsd.org Subject: an driver / Cisco Aironet 340 stopped working I've used my Cisco WLAN with Toshiba Portege 3440 couple years but now it's broken. I just upgraded to new Toshiba Tecra M1 and reinstalled FreeBSD there and now I get "an0: record length mismatch -- expected 430, got 440 for Rid ff68" errors. I already tried with old laptop with latest kernel and old kernel from Jun 26th but it's also broken there so I cannot say who long this has been broken. Tomppa fwe0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::39ff:fe34:7ff2%fwe0 prefixlen 64 scopeid 0x1 ether 02:00:39:34:7f:f2 ch 1 dma 0 em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=3<RXCSUM,TXCSUM> inet6 fe80::208:dff:feda:ec61%em0 prefixlen 64 scopeid 0x2 inet 212.226.167.247 netmask 0xfffffff0 broadcast 212.226.167.255 inet6 2001:670:82:babe:208:dff:feda:ec61 prefixlen 64 tentative autoconf ether 00:08:0d:da:ec:61 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 an0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::240:96ff:fe38:56e7%an0 prefixlen 64 scopeid 0x4 ether 00:40:96:38:56:e7 media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) status: associated ssid AsOlA 1:AsOlA stationname phb channel 6 authmode OPEN powersavemode CAM powersavesleep 200 wepmode ON weptxkey 1 wepkey 1:128-bit Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #3: Sat Aug 16 20:28:39 EEST 2003 tomppa_at_phb.bert.sun.fi:/u/F/local/sup/5.0/sys/i386/compile/PHB acpi_alloc_wakeup_handler: unable to allocate wake memory Preloaded elf kernel "/boot/kernel/kernel" at 0xc0650000. Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc06502e4. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc0650394. Preloaded splash_image_data "/boot/splash.bmp" at 0xc0650440. Preloaded elf module "/boot/kernel/usb.ko" at 0xc0650490. Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc0650538. Preloaded elf module "/boot/kernel/ums.ko" at 0xc06505e4. Preloaded elf module "/boot/kernel/umass.ko" at 0xc065068c. Preloaded elf module "/boot/kernel/random.ko" at 0xc0650738. Calibrating clock(s) ... i8254 clock: 1193183 Hz Timecounter "i8254" frequency 1193183 Hz quality 0 Calibrating TSC clock ... TSC clock: 1396507980 Hz CPU: Intel(R) Pentium(R) M processor 1400MHz (1396.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV ,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> real memory = 536674304 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000677000 - 0x000000001f692fff, 520208384 bytes (127004 pages) avail memory = 513142784 (489 MB) bios32: Found BIOS32 Service Directory header at 0xc00f0240 bios32: Entry = 0xfc0e3 (c00fc0e3) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xd641 pnpbios: Found PnP BIOS data at 0xc00f0450 pnpbios: Entry = f0000:9138 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID 8938f351 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 40 00 00 01 00 02 00 02 13 01 00 01 2d 01 00 01 38 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 31 mode(s) found VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc053aca0 (1000040) VESA: Trident CYBER 2100 VESA: TRIDENT MICROSYSTEMS INC. CYBER 2100 RXT 7.3 (16.28) random: <entropy source> splash: image_at_0xc053be60, size:787506 splash_bmp: beyond screen capacity (1024x768, 255 colors) splash_bmp: beyond screen capacity (1024x768, 255 colors) bmp_start(): splash_mode:261 splash: image decoder found: splash_bmp acpi0: <TOSHIB 750 > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086) pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00f01a0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 31 A 0x62 11 embedded 0 31 B 0x61 11 embedded 0 29 A 0x60 11 embedded 0 29 B 0x63 11 embedded 0 29 C 0x62 11 embedded 0 29 D 0x6b 11 embedded 2 11 A 0x60 11 embedded 2 11 B 0x63 11 embedded 1 0 A 0x6a 11 embedded 2 10 A 0x63 11 embedded 2 10 B 0x60 11 embedded 2 13 A 0x60 11 embedded 2 7 A 0x69 11 embedded 2 9 A 0x68 11 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks BAD min = 3, max = 189, width = 186 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks BAD min = 3, max = 382, width = 379 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.2 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.3 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.2 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base c0000000, size 28, enabled found-> vendor=0x8086, dev=0x3340, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3341, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000efe0, size 5, enabled pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA) pcib0: slot 29 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x24c2, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000ef80, size 5, enabled pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD) pcib0: slot 29 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x24c4, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 0000ef60, size 5, enabled pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC) pcib0: slot 29 INTC is routed to irq 11 found-> vendor=0x8086, dev=0x24c7, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type 1, range 32, base dfeffc00, size 10, enabled pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH) pcib0: slot 29 INTD is routed to irq 11 found-> vendor=0x8086, dev=0x24cd, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x83 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000bff8, size 3, enabled map[14]: type 4, range 32, base 0000bff4, size 2, enabled map[18]: type 4, range 32, base 0000bfe8, size 3, enabled map[1c]: type 4, range 32, base 0000bfe4, size 2, enabled map[20]: type 4, range 32, base 0000bfa0, size 4, enabled pcib0: matched entry for 0.31.INTA (source \\_SB_.LNKC) pcib0: slot 31 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x24ca, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 4, range 32, base 0000be00, size 8, enabled map[14]: type 4, range 32, base 0000bdc0, size 6, enabled map[18]: type 1, range 32, base dfcffe00, size 9, enabled map[1c]: type 1, range 32, base dfcffd00, size 8, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x24c5, revid=0x03 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000ba00, size 8, enabled map[14]: type 4, range 32, base 0000b980, size 7, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x24c6, revid=0x03 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 agp0: <Intel 82855 host to AGP bridge> mem 0xc0000000-0xcfffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 256M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xdff00000-0xf7ffffff pcib1: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 1.0.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base f0000000, size 27, enabled map[14]: type 1, range 32, base efc00000, size 22, enabled map[18]: type 1, range 32, base e0000000, size 27, enabled map[1c]: type 1, range 32, base dfff8000, size 15, enabled pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKG) pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x1023, dev=0x2100, revid=0x91 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xefe0-0xefff irq 11 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xef80-0xef9f irq 11 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xef60-0xef7f irq 11 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfeffc00-0xdfefffff irq 11 at device 29.7 on pci0 ehci0: (New EHCI DeviceId=0x24cd8086) ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 5 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xdfd00000-0xdfdfffff pcib2: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.1 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.13.0 \\_SB_.LNKF irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.7.0 \\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.9.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.1 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.13.0 \\_SB_.LNKF irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.7.0 \\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.9.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base dfdff800, size 11, enabled map[14]: type 1, range 32, base dfdf8000, size 14, enabled pcib2: matched entry for 2.7.INTA (source \\_SB_.LNKF) pcib2: slot 7 INTA is routed to irq 11 found-> vendor=0x104c, dev=0x8023, revid=0x00 bus=2, slot=7, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dfdc0000, size 17, enabled map[18]: type 4, range 32, base 0000cf40, size 6, enabled pcib2: matched entry for 2.9.INTA (source \\_SB_.LNKE) pcib2: slot 9 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x1016, revid=0x03 bus=2, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base dfdbf000, size 12, enabled pcib2: matched entry for 2.10.INTA (source \\_SB_.LNKD) pcib2: slot 10 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x1043, revid=0x04 bus=2, slot=10, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1179, dev=0x0617, revid=0x32 bus=2, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 1 supports D0 D3 current D0 found-> vendor=0x1179, dev=0x0617, revid=0x32 bus=2, slot=11, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base dfdbee00, size 9, enabled pcib2: matched entry for 2.13.INTA (source \\_SB_.LNKA) pcib2: slot 13 INTA is routed to irq 11 found-> vendor=0x1179, dev=0x0805, revid=0x03 bus=2, slot=13, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xdfdf8000-0xdfdfbfff,0xdfdff800-0xdfdfffff irq 11 at device 7.0 on pci2 fwohci0: latency timer 64 -> 64. fwohci0: cache size 8 -> 8. pcib2: device fwohci0 requested decoded memory range 0xdfdff800-0xdfdfffff fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:00:39:00:00:34:7f:f2 fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: loop=0, retry=0 fwohci0: fwphy_rddata: loop=0, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: loop=0, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: loop=0, retry=0 fwohci0: fwphy_rddata: loop=0, retry=0 fwohci0: fwphy_rddata: loop=0, retry=0 fwohci0: fwphy_rddata: loop=0, retry=0 fwohci0: fwphy_rddata: loop=0, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 if_fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:00:39:34:7f:f2 fwe0: bpf attached sbp0: <SBP2/SCSI over firewire> on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: loop=0, retry=0 fwohci0: fwphy_rddata: loop=0, retry=0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.6.6> port 0xcf40-0xcf7f mem 0xdfdc0000-0xdfddffff irq 11 at device 9.0 on pci2 pcib2: device em0 requested decoded memory range 0xdfdc0000-0xdfddffff pcib2: device em0 requested decoded I/O range 0xcf40-0xcf7f em0: bpf attached em0: Speed:N/A Duplex:N/A pci2: <network> at device 10.0 (no driver attached) cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci2 pcib2: device cbb0 requested decoded memory range 0xdfd00000-0xdfdfffff cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.11.INTA (source \\_SB_.LNKA) pcib2: slot 11 INTA is routed to irq 11 cbb0: PCI Configuration space: 0x00: 0x06171179 0x04900007 0x06070032 0x00824000 0x10: 0xdfd00000 0x04800080 0x00040402 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00010001 0x00800000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860011f0 0x0c000000 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00040000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci2 pcib2: device cbb1 requested decoded memory range 0xdfd00000-0xdfdfffff cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.11.INTB (source \\_SB_.LNKD) pcib2: slot 11 INTB is routed to irq 11 cbb1: PCI Configuration space: 0x00: 0x06171179 0x04900007 0x06070032 0x00824000 0x10: 0xdfd01000 0x04800080 0x00050502 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00010001 0x00800000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860021f0 0x0c000000 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00040000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pci2: <base peripheral> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0xbfe4-0xbfe7,0xbfe8-0xbfef,0xbff4-0xbff7,0xbff8-0xbfff irq 11 at device 31.1 on pci0 ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: after reset mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: pre reset mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: after reset mask=03 stat0=00 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 pcm0: <Intel ICH4 (82801DB)> port 0xbdc0-0xbdff,0xbe00-0xbeff mem 0xdfcffd00-0xdfcffdff,0xdfcffe00-0xdfcfffff irq 11 at device 31.5 on pci0 pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)> pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: sndbuf_setmap a56000, 4000; 0xe5e4b000 -> a56000 pcm0: sndbuf_setmap a79000, 4000; 0xe5e4f000 -> a79000 pci0: <simple comms> at device 31.6 (no driver attached) unknown: not probed (disabled) acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x801 0x811 0x801 0x801 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) npx0: <math processor> on motherboard npx0: INT 16 interface ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x801 0x801 0x801 0x801 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:261 fb0: window:0xe5e8a000 size:32768k gran:32768k, buf:0xe5e8a000 size:32768k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1396507980 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached em0: Link is up 100 Mbps Full Duplex acpi_cmbat0: battery initialization start acpi_cmbat1: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ad0: success setting UDMA100 on Intel ICH4 chip ad0: <TOSHIBA MK4019GAX/FA003E> ATA-5 disk at ata0-master ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=12 dmamode=34 udmamode=69 cblid=1 GEOM: new disk ad0 bus_explore done sbp_post_explore (sbp_cold=2) ar: FreeBSD check1 failed ata1-master: piomode=12 dmamode=34 udmamode=66 dmaflag=1 ata1-master: success setting PIO4 on Intel ICH4 chip acd0: <DW-224E/7.0B> CD-RW drive at ata1 as master acd0: read 4134KB/s (34515KB/s) write 4134KB/s (4134KB/s), 1658KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet acd0: Writes: CD-R, CD-RW, test write acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-R 120mm photo disc pcm0: measured ac97 link rate at 48001 Hz, will use 48000 Hz [0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:53416062 [1] f:00 typ:6 s(CHS):1023/255/63 e(CHS):1023/254/63 s:53416125 l:16370235 [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:69786360 l:7197120 [3] f:00 typ:6 s(CHS):1023/255/63 e(CHS):1023/254/63 s:76983480 l:1156680 GEOM: Configure ad0s1, start 32256 length 27349023744 end 27349055999 GEOM: Configure ad0s2, start 27349056000 length 8381560320 end 35730616319 GEOM: Configure ad0s3, start 35730616320 length 3684925440 end 39415541759 GEOM: Configure ad0s4, start 39415541760 length 592220160 end 40007761919 GEOM: Configure ad0s3a, start 536870912 length 3148054528 end 3684925439 GEOM: Configure ad0s3b, start 0 length 536870912 end 536870911 GEOM: Configure ad0s3c, start 0 length 3684925440 end 3684925439 (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered start IR DMA 0x0 fwohci0: maxdesc: 3 em0: Link is up 100 Mbps Full Duplex fwohci0: maxdesc: 5 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 30 func 0 em0: Link is up 100 Mbps Full Duplex acpi_cmbat0: battery initialization failed, giving up acpi_cmbat1: battery initialization failed, giving up pcib2: device pccard1 requested decoded memory range 0xdfd00000-0xdfdfffff pccard1: CIS version PCCARD 2.0 or 2.1 pccard1: CIS info: Cisco Systems, 340 Series Wireless LAN Adapter pccard1: Manufacturer code 0x15f, product 0x7 pccard1: function 0: network adapter, ccr addr 3e0 mask 7 pccard1: function 0, config table entry 5: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqlevel pcib2: device pccard1 requested decoded I/O range 0x100-0xffffffff pcib2: device pccard1 requested decoded memory range 0xdfd00000-0xdfdfffff an0: <Cisco Systems 340 Series Wireless LAN Adapter> at port 0x100-0x13f irq 11 function 0 config 5 on pccard1 pcib2: device an0 requested decoded I/O range 0x100-0x13f an0: record length mismatch -- expected 104, got 852 for Rid ff11 pcib2: device pccard1 requested decoded I/O range 0x100-0x13f pcib2: device an0 requested decoded I/O range 0x100-0x13f an0: record length mismatch -- expected 156, got 182 for Rid ff10 an0: record length mismatch -- expected 132, got 176 for Rid ff00 an0: record length mismatch -- expected 104, got 852 for Rid ff11 an0: got RSSI <-> dBM map an0: Ethernet address: 00:40:96:38:56:e7 an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps an0: bpf attached an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 156, got 182 for Rid ff10 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 156, got 182 for Rid ff10 an0: record length mismatch -- expected 156, got 182 for Rid ff20 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 156, got 182 for Rid ff10 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 156, got 182 for Rid ff10 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: record length mismatch -- expected 138, got 144 for Rid ff50 an0: record length mismatch -- expected 430, got 440 for Rid ff68 an0: RID access failed an0: RID access failed pcib2: device pccard1 requested decoded I/O range 0x100-0x13f an0: detached _______________________________________________ freebsd-mobile_at_freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "freebsd-mobile-unsubscribe_at_freebsd.org"Received on Mon Aug 18 2003 - 03:24:37 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:19 UTC