Hello, On Wed, Aug 20, 2003 at 03:20:55PM -0400, Matt Gostick wrote: > I have a SND Blaster 16 in my computer. I was using FreeBSD 4.8 and > 'device pcm' in my kernel config file, worked great. I've completely > re-installed with 5.1R and recompiled my kernel with 'device pcm'. > Unfortunately sound doesn't work. You also could add 'device sbc' to your kernel config since that is the SB bridge driver. But the card should work with PCM only. What does 'cat /dev/sndstat' say? The issue is probably some resource conflict. Since you have an SB 16, I'll have to ask: is it ISA? Or ISAPnP? Or PCI? PCI should "just work" but if it is ISA, you will need some tweaking. > I no longer have a /dev/snd0 device - I think I had one before... how > do I make devices in 5.1R??? MAKEDEV is no longer available... and > section 9.5 of the FreeBSD manual says: "If you are running FreeBSD 5.0 > or later you can safely skip this section. These versions use devfs(5) > to allocate device nodes transparently for the user" You do not need this, devfs will create the device for you when needed. -- Regards: Szilveszter ADAM Budapest HungaryReceived on Wed Aug 20 2003 - 12:04:30 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:19 UTC