Re: ENE 4-in-1 card reader

From: Lars Eggert <larse_at_ISI.EDU>
Date: Fri, 22 Aug 2003 10:07:21 -0700
M. Warner Losh wrote:
> : > What's at device 16.0?
> : 
> : cbb0_at_pci0:16:0: class=0x060700 card=0x14111524 chip=0x14111524 rev=0x01
> : hdr=0x02
> :       vendor   = 'ENE Technology Inc'
> :       class    = bridge
> :       subclass = PCI-CardBus
> 
> So is the the CB1410, CB1420, CB710 or CB720?

With your new commit, it is detected as a CB720. Even before that
commit, the PC card slot on this box worked. I have a Cisco Aironet 350
in there, because the experimental bcm Broadcom 4401 driver has issues
with the onboard NIC.

However, even with a new kernel that has your latest commit, this device
is still unattached. I'm attaching pciconf and dmesg, maybe that'll be
of help?

Thanks,
Lars
-- 
Lars Eggert <larse_at_isi.edu>           USC Information Sciences Institute


z  /usr/share/man/man1
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks, buffers remaining... 9 9 
done
cam: using minimum scsi_delay (100ms)
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #5: Fri Aug 22 02:44:57 PDT 2003
    root_at_:/usr/src/sys/i386/compile/KERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc062f000.
Preloaded elf module "/boot/kernel/if_bcm.ko" at 0xc062f244.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc062f2f0.
Timecounter "i8254" frequency 1193140 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2393.93-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 520077312 (495 MB)
avail memory = 498188288 (475 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 16384k memory, flags:0x0, mode table:0xc052d7a2 (1000022)
VESA: SiS
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   P4S8L   > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00f15e0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTB is routed to irq 10
pcib0: slot 2 INTA is routed to irq 11
pcib0: slot 2 INTC is routed to irq 15
pcib0: slot 3 INTA is routed to irq 5
pcib0: slot 3 INTB is routed to irq 6
pcib0: slot 3 INTC is routed to irq 9
pcib0: slot 3 INTD is routed to irq 9
pcib0: slot 14 INTA is routed to irq 10
pcib0: slot 14 INTA is routed to irq 10
pcib0: slot 15 INTA is routed to irq 15
pcib0: slot 16 INTA is routed to irq 11
pcib0: slot 16 INTB is routed to irq 3
pcib0: slot 19 INTA is routed to irq 15
agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
fwohci0: vendor=1039, dev=7007
fwohci0: <1394 Open Host Controller Interface> mem 0xdf000000-0xdf000fff irq 10 at device 2.3 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:0b:c0:bf
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:0b:c0:bf
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=5, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <SiS 962 UDMA133 controller> port 0xa400-0xa40f,0xa800-0xa803,0xb000-0xb007,0xb400-0xb403,0xb800-0xb807 irq 11 at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <SiS 7012> port 0x9000-0x907f,0x9400-0x94ff irq 15 at device 2.7 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xde800000-0xde800fff irq 5 at device 3.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xde000000-0xde000fff irq 6 at device 3.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Mitsumi Electric Hub in Apple USB Keyboard, class 9/0, rev 1.10/2.11, addr 2
uhub2: 3 ports with 2 removable, bus powered
ukbd0: Mitsumi Electric Apple USB Keyboard, rev 1.00/1.03, addr 3, iclass 3/1
kbd0 at ukbd0
ums0: Logitech USB-PS/2 Mouse, rev 1.00/1.20, addr 4, iclass 3/1
ums0: 3 buttons and Z dir.
ohci2: <SiS 5571 USB controller> mem 0xdd800000-0xdd800fff irq 9 at device 3.2 on pci0
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub3: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdd000000-0xdd000fff irq 9 at device 3.3 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub4: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 6 ports with 6 removable, self powered
bktr0: <BrookTree 878> mem 0xe7000000-0xe7000fff irq 10 at device 14.0 on pci0
bktr0: Hauppauge Model 61381 D423
bktr0: Detected a MSP3430G-A4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c stereo, remote control.
pci0: <multimedia> at device 14.1 (no driver attached)
bcm0: <Broadcom 10/100 Base-T Ethernet> mem 0xdc800000-0xdc801fff irq 15 at device 15.0 on pci0
bcm0: Ethernet address: 00:0c:6e:2c:67:cf
miibus0: <MII bus> on bcm0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: <ENE CB720 PCI-CardBus Bridge> mem 0xfe800000-0xfe800fff irq 11 at device 16.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci0: <memory, flash> at device 16.1 (no driver attached)
pci0: <simple comms> at device 19.0 (no driver attached)
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2393929720 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
IPv6 packet filtering initialized, logging disabled
IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
an0: <Cisco Systems 350 Series Wireless LAN Adapter> at port 0x100-0x13f irq 11 function 0 config 5 on pccard0
an0: got RSSI <-> dBM map
an0: Ethernet address: 00:40:96:40:5b:c9
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
uhub2: at uhub1 port 1 (addr 2) disconnected
ad0: 190782MB <WDC WD2000JB-32EVA0> [387621/16/63] at ata0-master UDMA100
ukbd0: detached
ums0: detached
acd0: DVD-R <PIONEER DVD-RW DVR-106D> at ata0-slave UDMA33
uhub2: detached
cd0 at ata0 bus 0 target 1 lun 0
cd0: <PIONEER DVD-RW  DVR-106D 1.05> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s2a
uhub2: Mitsumi Electric Hub in Apple USB Keyboard, class 9/0, rev 1.10/2.11, addr 2
uhub2: 3 ports with 2 removable, bus powered
ukbd0: Mitsumi Electric Apple USB Keyboard, rev 1.00/1.03, addr 3, iclass 3/1
kbd0 at ukbd0
ums0: Logitech USB-PS/2 Mouse, rev 1.00/1.20, addr 4, iclass 3/1
ums0: 3 buttons and Z dir.


agp0_at_pci0:0:0:	class=0x060000 card=0x80811043 chip=0x06511039 rev=0x02 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS651 Host-to-PCI Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1_at_pci0:1:0:	class=0x060400 card=0x00000000 chip=0x00011039 rev=0x00 hdr=0x01
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS 530 Virtual PCI-to-PCI bridge (AGP)'
    class    = bridge
    subclass = PCI-PCI
isab0_at_pci0:2:0:	class=0x060100 card=0x00000000 chip=0x09621039 rev=0x04 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    class    = bridge
    subclass = PCI-ISA
fwohci0_at_pci0:2:3:	class=0x0c0010 card=0x80991043 chip=0x70071039 rev=0x00 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS OHCI Compliant FireWire Controller'
    class    = serial bus
    subclass = FireWire
atapci0_at_pci0:2:5:	class=0x01018a card=0x807a1043 chip=0x55131039 rev=0x00 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS5513 EIDE Controller (A,B step)'
    class    = mass storage
    subclass = ATA
pcm0_at_pci0:2:7:	class=0x040100 card=0x80951043 chip=0x70121039 rev=0xa0 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS7012 PCI Audio Accelerator'
    class    = multimedia
    subclass = audio
ohci0_at_pci0:3:0:	class=0x0c0310 card=0x807a1043 chip=0x70011039 rev=0x0f hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS5597/8 Universal Serial Bus Controller'
    class    = serial bus
    subclass = USB
ohci1_at_pci0:3:1:	class=0x0c0310 card=0x807a1043 chip=0x70011039 rev=0x0f hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS5597/8 Universal Serial Bus Controller'
    class    = serial bus
    subclass = USB
ohci2_at_pci0:3:2:	class=0x0c0310 card=0x807a1043 chip=0x70011039 rev=0x0f hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS5597/8 Universal Serial Bus Controller'
    class    = serial bus
    subclass = USB
ehci0_at_pci0:3:3:	class=0x0c0320 card=0x807a1043 chip=0x70021039 rev=0x00 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS7002 USB 2.0 Enhanced Host Controller'
    class    = serial bus
    subclass = USB
bktr0_at_pci0:14:0:	class=0x040000 card=0x13eb0070 chip=0x036e109e rev=0x11 hdr=0x00
    vendor   = 'Brooktree Corporation'
    device   = 'Bt878 MediaStream Controller'
    class    = multimedia
    subclass = video
none0_at_pci0:14:1:	class=0x048000 card=0x13eb0070 chip=0x0878109e rev=0x11 hdr=0x00
    vendor   = 'Brooktree Corporation'
    device   = 'Bt878 Video Capture (Audio Section)'
    class    = multimedia
bcm0_at_pci0:15:0:	class=0x020000 card=0x80a81043 chip=0x440114e4 rev=0x01 hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM440x 10/100 Integrated Ethernet Controller'
    class    = network
    subclass = ethernet
cbb0_at_pci0:16:0:	class=0x060700 card=0x14111524 chip=0x14111524 rev=0x01 hdr=0x02
    vendor   = 'ENE Technology Inc'
    class    = bridge
    subclass = PCI-CardBus
none1_at_pci0:16:1:	class=0x050100 card=0x17241043 chip=0x05101524 rev=0x00 hdr=0x00
    vendor   = 'ENE Technology Inc'
    class    = memory
    subclass = flash
none2_at_pci0:19:0:	class=0x070304 card=0x0001134d chip=0x7892134d rev=0x02 hdr=0x00
    vendor   = 'PCTEL Inc.'
    device   = 'PCT 789T-A HSP MicroModem 56'
    class    = simple comms
none3_at_pci1:0:0:	class=0x030000 card=0x80811043 chip=0x63251039 rev=0x00 hdr=0x00
    vendor   = 'Silicon Integrated Systems (SiS)'
    device   = 'SiS650/651/740 GUI 2D/3D Accelerator'
    class    = display
    subclass = VGA


Received on Fri Aug 22 2003 - 08:07:29 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:19 UTC