Re: Please test: USB floppies

On Thursday 28 August 2003 21:35, Nate Lawson wrote:
> On Tue, 26 Aug 2003, Harald Schmalzbauer wrote:
> > On Monday 25 August 2003 23:19, Nate Lawson wrote:
> > > If anyone has a USB floppy drive that is giving them problems, please
> > > let me know.
> >
> > Hello,
> >
> > this one needs NO_SYNC I think.
> >
> > Played a bit some time ago but had no luck (I'm no programmer)
> >
> > port 1 addr 2: full speed, power 500 mA, config 1, NEC USB
> > UF000x(0x0040), NEC(0x0409), rev 1.23

*SNIP*

>
> Have you tried it again since early August?  Also, what is the exact
> behavior when you try to mount or read it?

Mounting, reading writing and umounting is working without errors, just these 
warnings.

Here are the one from today's world:
umass0: NEC NEC USB UF000x, rev 1.10/1.23, addr 4
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <NEC USB UF000x 1.23> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: 1MB (2880 512 byte sectors: 64H 32S/T 1C)
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status 
== 0x0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status 
== 0x0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status 
== 0x0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status 
== 0x0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status 
== 0x0
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status 
== 0x0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status 
== 0x0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status 
== 0x0
cale:/mnt# 

Thanks,

-Harry

>
> -Nate