Re: Please test: USB floppies

On Tue, 26 Aug 2003, Harald Schmalzbauer wrote:
> On Monday 25 August 2003 23:19, Nate Lawson wrote:
> > If anyone has a USB floppy drive that is giving them problems, please let
> > me know.
> Hello,
>
> this one needs NO_SYNC I think.
>
> Played a bit some time ago but had no luck (I'm no programmer)
>
> port 1 addr 2: full speed, power 500 mA, config 1, NEC USB UF000x(0x0040),
> NEC(0x0409), rev 1.23
> ___________________________
> Here's some log:
>
> umass0: NEC NEC USB UF000x, rev 1.10/1.23, addr 2
> (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
> (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
> (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <NEC USB UF000x 1.23> Removable Direct Access SCSI-0 device
> da0: 1.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY, Medium not present
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6

Have you tried it again since early August?  Also, what is the exact
behavior when you try to mount or read it?

-Nate