I just tried to upgrade my 4.8 machine to -current cvsupped Aug 30. However, the new kernel (GENERIC) has crashed to the debugger two out of the three times that I've tried to boot it. Nothing is attached to ata3 (the second Promise channel). A SAMSUNG SC-140B CD-ROM at at ata0-master (PIO4), a TOSHIBA DVD-ROM SD-R1002 (CD-RW + DVD-ROM) is at ata0-slave (PIO4), and a Maxtox 53073H6 [59554/16/63] drive is at ata2-master (UDMA100) (the first Promise channel). The messages go like this: ... ata3-master: WARNING - ATA_IDENTIFY recovered from missing interrupt ad6: WARNING - SETFEATURES recovered from missing interrupt ad6: WARNING - SETFEATURES recovered from missing interrupt ad6: WARNING - SETFEATURES recovered from missing interrupt Fatal trap 18: integer divide fault while in kernel mode instruction pointer = 0x8:0xc04d8c1b stack pointer = 0x10:0xc0728c2c frame pointer = 0x10:0xc0728cac code segment = base 0x0, limit 0xfffff, type 0x1b = DPL0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) kernel: type 18 trap, code 0 Stopped at __qdivrem+0x3b: divl %ecx,%eax db> where __qdivrem(0,0,0,0,0) at __qdivrem+0x3b __udivi3(0,0,0,0,0) at __udivi3+0x2e ad_print(c2671400,c2671470,1,0,0) at ad_print+0x1d3 ad_attach(c26198a4,c256c7e0,c05bde50,c0728d80) at ad_attach+0x446 ata_boot_attach(0,0,c0728d80,c03346a6,0) at ata_boot_attach+0x47 run_interrupt_driven_config_hooks(0,725000,725c00,725000,0) at run_interrupt_driven_config_hooks+0x2b mi_startup() at mi_startup_0xb5 begin() at begin+0x2c Any thoughts? Maybe I can disable the second channel of the Promise device somehow so I can get it to boot... Here is the dmesg from the 4.8 kernel: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-STABLE #8: Thu Jun 12 18:46:57 CDT 2003 ghelmer_at_spencer.cs.iastate.edu:/usr/src/sys/compile/SPENCER Timecounter "i8254" frequency 1193182 Hz CPU: AMD Duron(tm) Processor (706.29-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x630 Stepping = 0 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> real memory = 268353536 (262064K bytes) avail memory = 257290240 (251260K bytes) Preloaded elf kernel "kernel" at 0xc03ef000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00f1750 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA66 controller> port 0xb800-0xb80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 5 at device 4.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub1: 4 ports with 4 removable, self powered ugen0: Compaq Computers product 0x0003, rev 1.00/0.00, addr 3 uscanner0: Hewlett Packard Scanjet 4300C, rev 1.00/0.00, addr 4 uscanner0: setting config no failed device_probe_and_attach: uscanner0 attach returned 6 uhub1: port 3, set config at addr 4 failed uhub1: device problem, disabling port 3 ulpt0: Lexmark Lexmark Z42, rev 1.00/1.00, addr 4, iclass 7/1 uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 5 at device 4.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub3: 4 ports with 4 removable, self powered pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 4.4 dc0: <LC82C115 PNIC II 10/100BaseTX> port 0x9400-0x94ff mem 0xe1800000-0xe18000ff irq 15 at device 10.0 on pci0 dc0: Ethernet address: 00:a0:cc:37:0a:17 miibus0: <MII bus> on dc0 dcphy0: <Intel 21143 NWAY media interface> on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tekram_trm0: <Tekram DC395U/UW/F DC315/U Fast20 Wide SCSI Adapter> port 0x9000-0x90ff mem 0xe1000000-0xe1000fff irq 10 at device 11.0 on pci0 tekram_trm0: driver is using old-style compatibility shims pcm0: <Creative CT5880-C> port 0x8800-0x883f irq 11 at device 12.0 on pci0 pcm0: <SigmaTel STAC9708/9711 ac97 codec> atapci1: <Promise ATA100 controller> port 0x7000-0x703f,0x7400-0x7403,0x7800-0x7807,0x8000-0x8003,0x8400-0x8407 mem 0xe0800000-0xe081ffff irq 10 at device 17.0 on pci0 ata2: at 0x8400 on atapci1 ata3: at 0x7800 on atapci1 orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xce7ff,0xd0000-0xd7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: cannot reserve I/O port range IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default ata3-slave: ATA identify retries exceeded ata3-master: ATA identify retries exceeded ad4: 29311MB <Maxtor 53073H6> [59554/16/63] at ata2-master UDMA100 acd0: CDROM <SAMSUNG SC-140B> at ata0-master PIO4 acd1: CD-RW <TOSHIBA DVD-ROM SD-R1002> at ata0-slave PIO4 Waiting 5 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad4s3a da0 at tekram_trm0 bus 0 target 5 lun 0 da0: <IOMEGA ZIP 100 D.09> Removable Direct Access SCSI-2 device da0: 21KB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present dc0: TX underrun -- increasing TX threshold dc0: TX underrun -- increasing TX threshold -- Guy Helmer <ghelmer_at_palisadesys.com>Received on Sun Aug 31 2003 - 12:57:23 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:20 UTC