At Mon, 08 Dec 2003 03:19:07 +0900, Tatsumi Hosokawa wrote: > > At Sun, 7 Dec 2003 17:10:04 +0000, > Dan Foster wrote: > > > > Sounds interesting... I've got an Asus P4C800 (i875 w/ICH5) and SATA > > (Seagate Barracuda ST3120026AS and Western Digital Raptor WD360GD) but > > haven't tested the latest code yet -- worked fine with the build from about > > 10 days ago, FWIW. > > I installed this system with 5.2-BETA (ISO image), and cvsup'ed > today's current. I experienced the same instability on both kernels. On today's -current, my SiI 3112A Rev.00 works fine, but ICH5 still doesn't work well. When I executed newfs on ICH5 SATA disks, following messages were displayed. --------------------------------------------------------------------------- ad4: WARNING - WRITE_DMA recovered from missing interrupt ad4: FAILURE - WRITE_DMA status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 ad4: timeout sending command=c8 ad4: error issuing DMA command ad6: WARNING - WRITE_DMA recovered from missing interrupt ad6: FAILURE - WRITE_DMA status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 --------------------------------------------------------------------------- This is 'boot -v' message of this machine. Following mutex messages are displayed near ICH5 SATA probe message. --------------------------------------------------------------------------- Sleeping on "atasrl" with the following non-sleepable locks held: exclusive sleep mutex g_xdown r = 0 (0xe0438cbc) locked _at_ /usr/src/sys/geom/geom_io.c:355 Sleeping on "atasrl" with the following non-sleepable locks held: exclusive sleep mutex g_xdown r = 0 (0xe0438cbc) locked _at_ /usr/src/sys/geom/geom_io.c:355 --------------------------------------------------------------------------- --------------------------------------------------------------------------- 8 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 slot 3 3 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 3 3 0 B 0x69 3 4 5 6 7 9 10 11 12 14 15 slot 3 3 0 C 0x6a 3 4 5 6 7 9 10 11 12 14 15 slot 3 3 0 D 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 4 3 1 A 0x69 3 4 5 6 7 9 10 11 12 14 15 slot 4 3 1 B 0x6a 3 4 5 6 7 9 10 11 12 14 15 slot 4 3 1 C 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 4 3 1 D 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 5 3 2 A 0x6a 3 4 5 6 7 9 10 11 12 14 15 slot 5 3 2 B 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 5 3 2 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 5 3 2 D 0x69 3 4 5 6 7 9 10 11 12 14 15 slot 6 3 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 6 3 3 B 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 6 3 3 C 0x69 3 4 5 6 7 9 10 11 12 14 15 slot 6 3 3 D 0x6a 3 4 5 6 7 9 10 11 12 14 15 slot 7 3 4 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 7 3 4 B 0x69 3 4 5 6 7 9 10 11 12 14 15 slot 7 3 4 C 0x6a 3 4 5 6 7 9 10 11 12 14 15 slot 7 3 4 D 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 8 3 5 A 0x69 3 4 5 6 7 9 10 11 12 14 15 slot 8 3 5 B 0x6a 3 4 5 6 7 9 10 11 12 14 15 slot 8 3 5 C 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 8 3 5 D 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 D 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 C 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 device_probe_and_attach: acpi_cpu1 attach returned 6 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x1000-0x10bf,0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f0000000, size 27, enabled found-> vendor=0x8086, dev=0x2570, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2571, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2573, revid=0x02 bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000bc00, size 5, enabled pcib0: matched entry for 0.29.INTA (source ) pcib0: device is hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24d2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 map[20]: type 4, range 32, base 0000b000, size 5, enabled pcib0: matched entry for 0.29.INTB (source ) pcib0: device is hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24d4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=19 map[20]: type 4, range 32, base 0000b400, size 5, enabled pcib0: matched entry for 0.29.INTC (source ) pcib0: device is hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24d7, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 map[20]: type 4, range 32, base 0000b800, size 5, enabled pcib0: matched entry for 0.29.INTA (source ) pcib0: device is hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24de, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 map[10]: type 1, range 32, base fc100000, size 10, enabled pcib0: matched entry for 0.29.INTD (source ) pcib0: device is hardwired to IRQ 23 found-> vendor=0x8086, dev=0x24dd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=23 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x244e, revid=0xc2 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x02 (500 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00000000, size 3, enabled map[14]: type 4, range 32, base 00000000, size 2, enabled map[18]: type 4, range 32, base 00000000, size 3, enabled map[1c]: type 4, range 32, base 00000000, size 2, enabled map[20]: type 4, range 32, base 0000f000, size 4, enabled found-> vendor=0x8086, dev=0x24db, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000c000, size 3, enabled map[14]: type 4, range 32, base 0000c400, size 2, enabled map[18]: type 4, range 32, base 0000c800, size 3, enabled map[1c]: type 4, range 32, base 0000cc00, size 2, enabled map[20]: type 4, range 32, base 0000d000, size 4, enabled pcib0: matched entry for 0.31.INTA (source ) pcib0: device is hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24d1, revid=0x02 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 map[20]: type 4, range 32, base 00001400, size 5, enabled pcib0: matched entry for 0.31.INTB (source ) pcib0: device is hardwired to IRQ 17 found-> vendor=0x8086, dev=0x24d3, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 4, range 32, base 0000dc00, size 6, enabled map[18]: type 1, range 32, base fc101000, size 9, enabled map[1c]: type 1, range 32, base fc102000, size 8, enabled pcib0: matched entry for 0.31.INTB (source ) pcib0: device is hardwired to IRQ 17 found-> vendor=0x8086, dev=0x24d5, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 powerspec 2 supports D0 D3 current D0 agp0: <Intel 82865 host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 128M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf8000000-0xf9ffffff pcib1: prefetched decode 0xe0000000-0xefffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base f8000000, size 24, enabled map[14]: type 3, range 32, base e0000000, size 28, enabled pcib0: matched entry for 0.1.INTA (source ) pcib0: device is hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 found-> vendor=0x10de, dev=0x0312, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xa000-0xafff pcib2: memory decode 0xfc000000-0xfc0fffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.CSAB - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base fc000000, size 17, enabled map[18]: type 4, range 32, base 0000a000, size 5, enabled found-> vendor=0x8086, dev=0x1019, revid=0x00 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0238, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xa000-0xa01f mem 0xfc000000-0xfc01ffff irq 11 at device 1.0 on pci2 pcib2: device em0 requested decoded memory range 0xfc000000-0xfc01ffff pcib2: device em0 requested decoded I/O range 0xa000-0xa01f em0: bpf attached em0: Speed:N/A Duplex:N/A uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 16 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xb000-0xb01f irq 19 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xb400-0xb41f irq 18 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x8000-0x9fff pcib3: memory decode 0xfa000000-0xfbffffff pcib3: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci3: <ACPI PCI bus> on pcib3 pci3: physical bus=3 map[10]: type 4, range 32, base 00008000, size 3, enabled map[14]: type 4, range 32, base 00008400, size 2, enabled map[18]: type 4, range 32, base 00008800, size 3, enabled map[1c]: type 4, range 32, base 00008c00, size 2, enabled map[20]: type 4, range 32, base 00009000, size 4, enabled map[24]: type 1, range 32, base fb015000, size 9, enabled pcib3: matched entry for 3.1.INTA (source ) pcib3: device is hardwired to IRQ 21 found-> vendor=0x1095, dev=0x3112, revid=0x02 bus=3, slot=1, func=0 class=01-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 64, base fb000000, size 16, enabled pcib3: matched entry for 3.2.INTA (source ) pcib3: device is hardwired to IRQ 22 found-> vendor=0x173b, dev=0x03ea, revid=0x15 bus=3, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=22 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 32, base fb014000, size 11, enabled map[14]: type 1, range 32, base fb010000, size 14, enabled pcib3: matched entry for 3.5.INTA (source ) pcib3: device is hardwired to IRQ 21 found-> vendor=0x104c, dev=0x8024, revid=0x00 bus=3, slot=5, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 atapci0: <SiI 3112 SATA150 controller> port 0x9000-0x900f,0x8c00-0x8c03,0x8800-0x8807,0x8400-0x8403,0x8000-0x8007 mem 0xfb015000-0xfb0151ff irq 21 at device 1.0 on pci3 pcib3: device atapci0 requested decoded I/O range 0x9000-0x900f atapci0: [MPSAFE] pcib3: device atapci0 requested decoded memory range 0xfb015000-0xfb0151ff ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: at 0xfb015000 on atapci0 ata2: [MPSAFE] ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: at 0xfb015000 on atapci0 ata3: [MPSAFE] bge0: <Altima AC9100 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfb000000-0xfb00ffff irq 22 at device 2.0 on pci3 pcib3: device bge0 requested decoded memory range 0xfb000000-0xfb00ffff bge0: Ethernet address: 00:07:40:4c:10:a2 miibus0: <MII bus> on bge0 brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: bpf attached fwohci0: <Texas Instruments TSB43AB23> mem 0xfb010000-0xfb013fff,0xfb014000-0xfb0147ff irq 21 at device 5.0 on pci3 fwohci0: latency timer 32 -> 32. fwohci0: cache size 8 -> 8. pcib3: device fwohci0 requested decoded memory range 0xfb014000-0xfb0147ff fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:0d:61:00:00:17:35:3c fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x3 loop=0, retry=0 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:0d:61:17:35:3c fwe0: bpf attached sbp0: <SBP-2/SCSI over FireWire> on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci1 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci1 ata1: [MPSAFE] atapci2: <Intel ICH5 SATA150 controller> port 0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq 18 at device 31.2 on pci0 atapci2: [MPSAFE] ata4: reset tp1 mask=03 ostat0=50 ostat1=00 ata4-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata4-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata4: at 0xc000 on atapci2 ata4: [MPSAFE] ata5: reset tp1 mask=03 ostat0=50 ostat1=00 ata5-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata5-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata5: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata5: at 0xc800 on atapci2 ata5: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0-49, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:08, syncbits:08 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) acpi_cpu1: <CPU> on acpi0 device_probe_and_attach: acpi_cpu1 attach returned 6 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xd0000-0xd47ff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0xc401 0xc401 0xc401 0xc401 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xc401 0xc401 0xc401 0xc401 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 2813532920 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3dda1000 OUTL ST2 ALL ALL 12 00000000 3dda1080 8411:0007 RUN,ACTIVE, ack complete(11) 0x000000e0 0x00450000 0xffbaffff 0x00000000 ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH5 chip ata0-master: setting UDMA100 on Intel ICH5 chip ata0-slave: setting PIO4 on Intel ICH5 chip ata0-slave: setting UDMA100 on Intel ICH5 chip GEOM: create disk ad0 dp=0xc6aae360 ad0: <IBM-DTLA-307030/TX4OA50C> ATA-5 disk at ata0-master ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:60036417 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 30738645504 end 30738677759 GEOM: create disk ad1 dp=0xc6c8cc60 ad1: <IBM-DTLA-307030/TX4OA50C> ATA-5 disk at ata0-slave ad1: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ar: FreeBSD check1 failed GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s1c, start 0 length 30738645504 end 30738645503 GEOM: Configure ad0s1d, start 268435456 length 30470210048 end 30738645503 GEOM: new disk ad1 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on Intel ICH5 chip acd0: <MATSHITADVD-RAM LF-D310/A123> DVDR drive at ata1 as master acd0: 1024KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: DVDR, DVDRAM, test write acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin GEOM: create disk ad4 dp=0xc6c8c060 ad4: <Maxtor 7Y250M0/YAR51BW0> ATA-7 disk at ata2-master ad4: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, UDMA100 ar: FreeBSD check1 failed ata3-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:60036417 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad1s1, start 32256 length 30738645504 end 30738677759 GEOM: create disk ad6 dp=0xc6aafd60 ad6: <Maxtor 7Y250M0/YAR51BW0> ATA-7 disk at ata3-master ad6: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B ad6: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad4 GEOM: Configure ad1s1b, start 0 length 4294967296 end 4294967295 GEOM: Configure ad1s1c, start 0 length 30738645504 end 30738645503 GEOM: Configure ad1s1d, start 4294967296 length 268435456 end 4563402751 GEOM: Configure ad1s1e, start 4563402752 length 536870912 end 5100273663 GEOM: Configure ad1s1f, start 5100273664 length 25638371840 end 30738645503 GEOM: new disk ad6 Sleeping on "atasrl" with the following non-sleepable locks held: exclusive sleep mutex g_xdown r = 0 (0xe0438cbc) locked _at_ /usr/src/sys/geom/geom_io.c:355 Sleeping on "atasrl" with the following non-sleepable locks held: exclusive sleep mutex g_xdown r = 0 (0xe0438cbc) locked _at_ /usr/src/sys/geom/geom_io.c:355 ar: FreeBSD check1 failed ata4-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin GEOM: create disk ad8 dp=0xc6aaf560 ad8: <Maxtor 7Y250M0/YAR51BW0> ATA-7 disk at ata4-master ad8: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B ad8: 16 secs/int, 1 depth queue, UDMA100 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad4s1, start 32256 length 250994386944 end 250994419199 ata5-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin GEOM: create disk ad10 dp=0xc6aafb60 ad10: <Maxtor 7Y250M0/YAR51BW0> ATA-7 disk at ata5-master ad10: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B ad10: 16 secs/int, 1 depth queue, UDMA100 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad6s1, start 32256 length 250994386944 end 250994419199 GEOM: new disk ad8 GEOM: Configure ad4s1c, start 0 length 250994386944 end 250994386943 GEOM: Configure ad4s1d, start 0 length 250994386944 end 250994386943 GEOM: new disk ad10 GEOM: Configure ad6s1c, start 0 length 250994386944 end 250994386943 GEOM: Configure ad6s1d, start 0 length 250994386944 end 250994386943 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad8s1, start 32256 length 250994386944 end 250994419199 bus_explore done sbp_post_explore (sbp_cold=2) [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad10s1, start 32256 length 250994386944 end 250994419199 GEOM: Configure ad8s1c, start 0 length 250994386944 end 250994386943 GEOM: Configure ad8s1d, start 0 length 250994386944 end 250994386943 GEOM: Configure ad10s1c, start 0 length 250994386944 end 250994386943 GEOM: Configure ad10s1d, start 0 length 250994386944 end 250994386943 (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error ioapic0: routing intpin 1 (IRQ 1) to cluster 0 ioapic0: routing intpin 4 (IRQ 4) to cluster 0 ioapic0: routing intpin 8 (IRQ 8) to cluster 0 ioapic0: routing intpin 9 (IRQ 9) to cluster 0 ioapic0: routing intpin 11 (IRQ 11) to cluster 0 ioapic0: routing intpin 12 (IRQ 12) to cluster 0 ioapic0: routing intpin 13 (IRQ 13) to cluster 0 ioapic0: routing intpin 14 (IRQ 14) to cluster 0 ioapic0: routing intpin 15 (IRQ 15) to cluster 0 ioapic0: routing intpin 16 (IRQ 16) to cluster 0 ioapic0: routing intpin 18 (IRQ 18) to cluster 0 ioapic0: routing intpin 19 (IRQ 19) to cluster 0 ioapic0: routing intpin 21 (IRQ 21) to cluster 0 ioapic0: routing intpin 22 (IRQ 22) to cluster 0 --------------------------------------------------------------------------- -- Tatsumi Hosokawa <hosokawa_at_FreeBSD.org> http://FromTo.Cc/hosokawa/Received on Tue Dec 09 2003 - 04:15:44 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:33 UTC