Re: SATA disks on 5.2-CURRENT

From: Tatsumi Hosokawa <hosokawa_at_FreeBSD.org>
Date: Tue, 09 Dec 2003 23:53:43 +0900
At Tue, 09 Dec 2003 22:14:25 +0900,
Tatsumi Hosokawa wrote:
> 
> On today's -current, my SiI 3112A Rev.00 works fine, but ICH5 still
> doesn't work well.  When I executed newfs on ICH5 SATA disks,
> following messages were displayed.
> 
> ---------------------------------------------------------------------------
> ad4: WARNING - WRITE_DMA recovered from missing interrupt
> ad4: FAILURE - WRITE_DMA status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0
> ad4: timeout sending command=c8
> ad4: error issuing DMA command
> ad6: WARNING - WRITE_DMA recovered from missing interrupt
> ad6: FAILURE - WRITE_DMA status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0
> ---------------------------------------------------------------------------

The problem was isolated.

I purchased four Maxtor 7Y250M0 drives, but one causes DMA error and
another one is very slow, and other two drives works fine.... both on
ICH5 and SiI 3112A Rev.00.

I'll test these drives on windows later, but I can't do it soon
because there's no Windows slice on this machine.

Sorry for noisy message (but I couldn't imagine that two of four
drives were broken....)


--
Tatsumi Hosokawa
<hosokawa_at_FreeBSD.org>
http://FromTo.Cc/hosokawa/
Received on Tue Dec 09 2003 - 05:54:42 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:33 UTC