Re: Cdrecord broken with 5.2Beta and ATAPICAM

Hi, Martin

> Since the ATAnG commit I'm no longer able to burn any
> Cd's. 5.X, 5.1R did work.
Yes. me too.

> Writing pregap for track 1 at -150
> cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> write track pad data: error after 0 bytes
> CDB:  2A 00 FF FF FF 6A 00 00 1F 00
> BFree: 1568 K BSize: 1568 K
> status: 0x2 (CHECK CONDITION)
^^^^^^^^same error

> Starting new track at sector: 0
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 1.675s timeout 200s
> cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> CDB:  2A 00 00 00 00 00 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.192s timeout 200s

My log is following:

scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Using libscg version 'schily-0.7'
atapi: 0
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-106D'
Revision       : '1.07'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1267712 = 1238 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data    41 MB         padsize:   30 KB
Total size:       47 MB (04:42.44) = 21183 sectors
Lout start:       47 MB (04:44/33) = 21183 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11746 (97:25/29)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 8
Manufacturer: Hitachi Maxell, Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 338666
Starting to write CD/DVD at speed 8 in dummy SAO mode for single session.
Last chance to quit, starting dummy write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:    0 of   41 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB:  2A 00 00 00 01 17 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.000s timeout 200s

write track data: error after 571392 bytes
Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 08 00 00 00 00
Writing  time:    5.260s
Average write speed  55.5x.
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:   18.870s
cdrecord: fifo had 73 puts and 10 gets.
cdrecord: fifo was 0 times empty and 2 times full, min fill was 92%.

--maho