Re: Cdrecord broken with 5.2Beta and ATAPICAM

Vadim Belman wrote:
> 
> slave-mike wrote:
> 
>> You are most welcome.
>> Nakata Maho wrote:
>>
>>> Hi, slave-mike,
>>>
>>> I've just read your e-mail, thanks!
>>>
>>>
>>>> add -force flag and you can burn in spite of the ataNG problem with 
>>>> atapicam
> 
> 
>     Doesn't help in my case. The log follows:
> 
> ====
> /usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot do 
> mlockall(2).
> /usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer 
> underruns.
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> Cdrecord 2.00.3 (i386-unknown-freebsd5.2) Copyright (C) 1995-2002 Jörg 
> Schilling
> TOC Type: 1 = CD-ROM
> Using libscg version 'schily-0.7'
> Driveropts: 'burnfree'
> atapi: 0
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : 'MSI     '
> Identifikation : 'CD-RW MS-8332   '
> Revision       : '150D'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : MMC-2 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1806336 = 1764 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data   692 MB
> Total size:      794 MB (78:45.33) = 354400 sectors
> Lout start:      795 MB (78:47/25) = 354400 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 4
>   Is not unrestricted
>   Is not erasable
>   Disk sub type: Medium Type C, low Beta category (C-) (6)
>   ATIP start of lead in:  -11567 (97:27/58)
>   ATIP start of lead out: 359849 (79:59/74)
> Disk type:    Short strategy type (Phthalocyanine or similar)
> Manuf. index: 12
> Manufacturer: Mitsui Chemicals, Inc.
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 5449
> Starting to write CD/DVD at speed 32 in dummy SAO mode for single session.
> Last chance to quit, starting dummy write in 2 seconds.
>    1 seconds.
>    0 seconds.
>  Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is ON.
> Sending CUE sheet...
> /usr/local/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using 
> -150
> /usr/local/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: 
> retryable error
> CDB:  2A 00 FF FF FF 6A 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
> 00 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 2.330s timeout 200s
> Writing pregap for track 1 at -150
> write track pad data: error after 0 bytes
> BFree: 588 K BSize: 1764 K
> Starting new track at sector: 0
> Track 01:    0 of  692 MB written.
> /usr/local/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: 
> retryable error
> CDB:  2A 00 00 00 00 00 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
> 00 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.845s timeout 200s
> write track data: error after 0 bytes
> Writing  time:    8.209s
> Average write speed 577.2x.
> Fixating...
> Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 00 00
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time:    3.553s
> /usr/local/bin/cdrecord: fifo had 64 puts and 1 gets.
> /usr/local/bin/cdrecord: fifo was 0 times empty and 0 times full, min 
> fill was 100%.
> ====
> 
what was the command line?

-- 
http://www.slavepix.com/slavemike/