On Mon, 14 Jul 2003, Guenter Doerrhoefer wrote: > According to the release note the Belkin F5U103 should be supported. I > could not get it to operate, the device is recognized but cannot be > configured. Anyone got the Belkin to cooperate with 5.2-current? Heh, this reminded me to actually test the driver. It looks like there's an off-by-1 error in the speed setting code. With my Mac set to 38400, I have to set the -current box to 19200 in cu to get it to communicate properly. (This is testing with the F5U103 in my PC and my PowerBook with a Keyspan adapter, connected with a null modem cable. I run a terminal on both ends.) I'm debugging this and will report back shortly, unless the ubsa maintainers want to chip in. > Hint for programming: The port UCOMn mounted by the USBA-driver must > remain open after settings are made, otherwise the settings are lost > when port is closed. This is standard BSD serial device behavior. Annyoingly, ucom does not provide initial-setting devices and the like so you can't set a default. It would be a nice feature to add. -- Doug White | FreeBSD: The Power to Serve dwhite_at_gumbysoft.com | www.FreeBSD.orgReceived on Mon Jul 14 2003 - 11:02:34 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:15 UTC