whats an UDMA ICRC error ?

From: Andreas Klemm <andreas_at_freebsd.org>
Date: Tue, 3 Jun 2003 07:57:18 +0200
Hi,

my console today shows the following error message from
my disk:

ad2: UDMA ICRC error cmd=read fsbn 74689079 of 74689079-74689206 retrying
ad2: UDMA ICRC error cmd=read fsbn 74689079 of 74689079-74689206 retrying

What exactly does an UDMA ICRC error mean ?
I think this is simply a read error.
AFAIK an IDE disk doesn't have spare sectors or am I wrong ?
How severe is this error ? What do you think ??

Here the output of uname -a and dmesg

FreeBSD titan.klemm.apsfilter.org 5.1-RC FreeBSD 5.1-RC #0: Sun Jun  1 14:21:32 CEST 2003     root_at_titan.klemm.apsfilter.org:/usr/src/sys/i386/compile/TITAN5  i386

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RC #0: Sun Jun  1 14:21:32 CEST 2003
    root_at_titan.klemm.apsfilter.org:/usr/src/sys/i386/compile/TITAN5
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04b3000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04b31f4.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 997461361 Hz
CPU: Intel Pentium III (997.46-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536854528 (511 MB)
avail memory = 516313088 (492 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc03eb202 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   MED_2001> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00f0eb0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ulpt0: Hewlett-Packard PSC 2200 Series, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
umass0: Hewlett-Packard PSC 2200 Series, rev 2.00/1.00, addr 2
ugen0: Syncrosoft Protected Executer, rev 1.10/1.01, addr 3
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xb800-0xb8ff mem 0xed800000-0xed800fff irq 9 at device 9.0 on pci0
aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
pci0: <multimedia, audio> at device 10.0 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xa000-0xa03f mem 0xec800000-0xec8fffff,0xed000000-0xed000fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:d0:b7:ba:c1:c2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xcc000-0xcc7ff,0xc0000-0xcb7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA66
ad2: 38166MB <ST340823A> [77545/16/63] at ata1-master UDMA66
acd0: CD-RW <SONY CD-RW CRX140E> at ata0-slave PIO4
acd1: DVD-ROM <LITEON DVD-ROM LTD122> at ata1-slave PIO4
Waiting 8 seconds for SCSI devices to settle
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <HP psc 2210 1.00> Removable Direct Access SCSI-2 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
Mounting root from ufs:/dev/ad2s2a
ad2: UDMA ICRC error cmd=read fsbn 74689079 of 74689079-74689206 retrying
ad2: UDMA ICRC error cmd=read fsbn 74689079 of 74689079-74689206 retrying







	Andreas ///

-- 
Andreas Klemm - Powered by FreeBSD 4.8-STABLE
Need a magic printfilter today ? -> http://www.apsfilter.org/
Received on Mon Jun 02 2003 - 21:00:34 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:10 UTC